Troubleshooting Blink Camera Failure to Arm: Expert Tips to Fix the Issue

Having a security system installed inside your home gives you peace of mind, knowing that your house and everyone inside is safe and sound. Blink cameras are one of the most popular security cameras that provide reliable and quality surveillance at an affordable cost. However, Blink Camera systems have their own share of problems, and one of them is the failure to arm.

It can be frustrating, especially when you need the system to work at a crucial moment. If you’re experiencing this issue, don’t worry! This blog post will guide you through the steps that can help you troubleshoot Blink Camera failure to arm. We will discuss some common reasons why Blink cameras fail to arm and identify some simple troubleshooting steps to help you resolve the issue.

The simple tips we are going to discuss in this post will ensure that your Blink Camera system is working correctly so you can have complete peace of mind that your home is always secure. Let’s dive into some of these troubleshooting steps and explore how we can solve this problem together.

Check Internet Connection

If you’ve encountered the message “Blink camera failed to arm,” it could be due to an unstable internet connection. One of the common reasons for this is the router’s distance from the Blink camera. If the camera is too far away from the router or there are many obstacles between the two, the signal may not be strong enough to arm the camera.

To resolve this issue, you can move the camera closer to the router or opt for a Wi-Fi extender to improve signal strength. You can also try resetting your router and Blink camera and see if that fixes the problem. If the issue persists, you can contact Blink customer support for further assistance.

Remember to always ensure a strong and stable internet connection before attempting to arm your Blink camera.

Make sure the camera is connected to a stable Wi-Fi network.

When it comes to security cameras, a stable Wi-Fi connection is crucial for uninterrupted streaming and access to live footage. Checking your internet connection is essential before installing the camera to avoid any disruptions. You can check the strength of your signal by placing your camera in the location you intend to install it and running a signal test on your phone or laptop.

If the signal is poor, consider relocating the camera or installing a Wi-Fi extender to boost the signal strength. It’s also vital to prioritize your camera’s network connection to ensure it has adequate bandwidth to operate smoothly. Without a stable connection, you may experience delays or dropped connections, leading to missed alerts and compromised security.

So, before mounting your camera, be sure to check your internet connection to ensure that you have a stable and secure Wi-Fi network ready for your new security camera to connect to.

blink camera failed to arm

If the network is unstable, troubleshoot the issue before trying to arm the camera.

When it comes to setting up your home security camera, it’s important to make sure that your internet connection is stable before attempting to arm the camera. A spotty or weak connection can cause disruption and delays in recording, making it difficult to have a clear understanding of what’s happening in your home. To troubleshoot any issues with your internet connection, start by checking your Wi-Fi signal strength and testing your internet speed.

If necessary, try resetting your router or contacting your internet service provider for assistance. Remember, a strong and stable network connection is key to ensuring the effectiveness and reliability of your home security camera system. By taking the time to check your internet connection beforehand, you can rest assured that your camera is armed and ready to capture any potential threats that may arise.

Check Camera Settings

If your Blink camera failed to arm, it could be due to incorrect camera settings. Start by checking the device’s settings to ensure they are aligned with your preferences. If your camera is set to “disarmed,” it won’t arm when you need it to.

Additionally, ensure that all the settings are in order, such as the motion detection and the camera’s sensitivity. Be sure to adjust these settings accordingly, especially if you’re experiencing frequent false alarms. Also, check to see if the power source is functioning correctly.

If you’re using a battery-powered unit, make sure the batteries are charged, or replace dead ones, since this could lead to issues with arming and disarming. If you’re still having issues, contact the manufacturer for further assistance.

Check if motion detection is enabled for the camera.

If you’re wondering whether the motion detection feature is enabled on your camera, you’ll want to take a look at your camera settings. Most cameras come with a user manual that can walk you through how to access and adjust the settings on your device. The motion detection feature is usually found under the “Settings” menu, but the exact location may vary depending on the brand or model of your camera.

Once you’ve located the motion detection setting, you can toggle it on or off as needed. Enabling motion detection is a great way to monitor your property or keep an eye on your home while you’re away. If you’re still unsure about how to enable motion detection on your particular camera, you may want to reach out to customer service for help.

By taking the time to double-check your camera settings, you can rest easy knowing your property is being monitored around the clock.

Ensure that the camera is armed to detect motion.

When it comes to ensuring that your security camera is effectively detecting motion, it’s important to check the camera settings to make sure it’s armed and ready. This step may seem obvious, but it’s crucial for ensuring that your camera is working properly. Check for any settings such as motion detection sensitivity or detection zones to make sure they’re correctly configured.

You’ll also want to make sure that your camera’s motion detection feature is turned on, which may require accessing its settings menu. It’s essential to check these settings regularly to ensure that your camera is always ready to detect any movement in its field of view. By taking the time to check and adjust your camera’s settings, you can maximize your security footage’s accuracy and ensure that you’re getting the most protection possible.

So, take a few minutes to set up and check your camera’s motion detection settings to keep your property safeguarded against any unwanted intruders.

Check Battery Life

If you’re having trouble arming your Blink camera, the first thing you should check is the battery life. A low battery can cause all sorts of issues, including failed arming attempts. Make sure to check the battery level in the app or by physically looking at the camera itself.

If the battery is low, simply replace it with a new one and try to arm the camera again. In addition to checking the battery life, also make sure that the camera is connected properly to your Wi-Fi network and that there is no physical obstruction blocking its view. By taking these steps, you should be able to quickly resolve any arming issues with your Blink camera and ensure that it is functioning properly for your home security needs.

Check if the battery is low or needs to be replaced.

Checking the battery life of your devices is essential for ensuring optimal performance. Low battery life can slow down your device and could potentially cause hardware malfunctions. To check if the battery is low or needs to be replaced, go to your device’s settings and check the battery percentage.

If it’s below 20%, it’s time to charge your device. If your device frequently runs out of battery quickly, then it’s time to replace the battery. Think of your battery like the fuel for your car.

Without sufficient fuel, your car won’t take you as far. The same goes for your device’s battery life. By regularly monitoring your device’s battery life, you’ll be able to make sure it’s always sufficiently charged and ready to go.

Make sure that the battery is fully charged before trying to arm the camera.

When it comes to securing your belongings and property, a home security camera is an excellent investment. However, before you begin using the camera to monitor your surroundings, it’s important to check the battery life. Make sure to charge the battery fully to ensure maximum efficiency and avoid any unexpected interruptions in the monitoring process.

Remember, a low battery can cause the camera to turn off unexpectedly, leaving your property vulnerable. If you’re unsure if the battery is fully charged, connect the camera to a power source and allow it to charge overnight. This simple step can save you from the frustration of missing important footage due to a dead battery.

So, before you arm your camera, take the time to check the battery life and be confident that your property is fully protected.

Contact Customer Support

If you’ve run into issues with your Blink camera failing to arm, don’t worry – you’re not alone. Many users have reported similar problems, but there are some simple steps you can take to troubleshoot the issue. First, try restarting your camera and your internet router to ensure a clean connection.

If this doesn’t work, check your camera’s battery level – if it’s low, this can prevent the device from arming properly. Another potential problem could be a weak Wi-Fi signal, so try moving your router closer to the camera or investing in a Wi-Fi extender. If none of these solutions work, it’s time to contact customer support.

Blink offers email and phone support, and their team is well-equipped to handle any issues you may be experiencing. They can help troubleshoot the problem further, offer additional solutions, or even offer a replacement camera if necessary. Remember, when it comes to tech issues like this, it’s always best to ask for help rather than trying to solve the problem on your own.

If none of the above solutions work, contact customer support for further assistance.

If you have tried all the possible solutions but still facing issues, then it’s time to contact customer support for further assistance. Customer support is always there to help you with any issue you’re facing regarding their services. You can contact them via phone, email, or live chat, and they will provide you with the necessary guidance and support to resolve the issue as soon as possible.

They have a team of experts who are trained to handle all sorts of problems, and they will assist you until the issue is resolved. So, don’t hesitate to contact customer support if you’re experiencing any difficulties. They will be more than happy to assist you and ensure that you have a smooth experience.

Provide them with details of the issue and steps you have taken to troubleshoot.

When dealing with an issue related to a product or service, it’s always recommended to contact customer support. In order to make your interaction with the support team as smooth and effective as possible, it’s important to provide them with all the details of the issue you are facing, and the steps you have taken so far to troubleshoot the problem. This will help the customer support team better understand your situation, and provide a more suitable solution to your problem.

When contacting customer support, be sure to explain your issue in detail. Describe the symptoms you are experiencing, and provide any error messages you have received. This will help the support team pinpoint the root cause of the problem and provide you with the most appropriate solution.

It’s also important to let them know what steps you have taken so far to resolve the issue. This includes any troubleshooting steps you may have taken, such as restarting your device, checking your internet connection, or reinstalling the software. By providing this information, you are helping the support team to avoid repeating troubleshooting steps that you have already performed, and enable them to get to the root of the problem quickly.

This will ultimately result in a faster resolution to your issue. The more detailed and specific you are in your explanation, the easier it will be for the support team to provide you with an accurate solution. In conclusion, contacting customer support is always a good step when dealing with any issue related to a product or service.

By providing them with all the details of the issue and the steps you have taken so far to troubleshoot, you can ensure that you receive the most appropriate solution as quickly as possible. Remember to be as detailed and specific as possible in your explanations to make the process easier for both you and the customer support team.


When it comes to arming your Blink camera, it seems that sometimes even the most advanced technology can have a slight failure to launch. Whether it’s due to a pesky software glitch or simply forgetting to hit a button, let this be a reminder that even our trusty devices have their own moments of imperfection. So the next time your Blink camera fails to arm, remember to approach the situation with a dose of patience and a healthy sense of humor, because in the end, a good laugh is always the best solution.


Why is my Blink camera failing to arm?
There could be multiple reasons for this, such as a low battery, weak WiFi signal, or a software issue. Try checking the battery levels, relocating the camera closer to the WiFi router, or resetting the camera to see if it resolves the issue.

How can I troubleshoot connectivity issues with my Blink camera?
Make sure that your WiFi router is functioning properly and that the camera is within range of it. You can also try power cycling the camera or resetting your WiFi network settings to see if that resolves the issue.

What do I do if my Blink camera keeps disconnecting from my WiFi network?
First, check your WiFi connection and router settings to ensure they are working properly. It may also be helpful to relocate the camera to a more central location or connect it to a network extender. If the issue persists, contact Blink customer support for further assistance.

How do I update the firmware on my Blink camera?
You can update the firmware through the Blink app. Click on the camera settings, and then select the “Device Information” option. If a firmware update is available, it will prompt you to download and install it.