Troubleshooting Guide: Why Isn’t Your Blink Camera Recording Footage?

As a Blink camera owner, you rely on it to capture everything that happens within its range. However, have you ever found yourself looking at the recordings and realizing that it didn’t record anything at all? This can be frustrating and concerning, especially if you’re using your camera for security purposes. In this blog post, we’ll discuss some of the reasons why your Blink camera may not be recording and what you can do to fix it.

Whether it’s a technical glitch or an issue with the setup, we’ve got you covered. So, keep reading to learn more!

Check Your Connection Strength

If your Blink camera is not recording, one of the first things to check is the strength of your internet connection. A weak connection could be causing issues with the camera’s ability to record and store footage. It’s important to note that even if your Wi-Fi signal appears strong in certain areas of your home, there may be dead zones where the camera is located.

This is often the case if the camera is placed far from the router or if there are walls and other obstacles blocking the signal. To strengthen your connection, try moving the camera closer to the router or consider installing a Wi-Fi extender or mesh network system to expand coverage. Additionally, make sure that your internet speed meets the minimum requirements for your Blink camera, which can be found on the manufacturer’s website.

By ensuring a strong and reliable connection, you can help ensure that your Blink camera is always recording when it needs to.

Poor Wi-Fi Signal Strength

Poor Wi-Fi signal strength can be frustrating, especially when you’re trying to get work done or stream movies. But before you consider switching internet providers or investing in expensive equipment, it’s important to check your connection strength. Start by moving closer to your router to see if that improves the signal.

If you’re still having issues, try resetting your router or checking for any firmware updates. You can also try using a Wi-Fi extender or a mesh network to improve coverage throughout your home. In some cases, interference from other devices or even neighboring networks can cause signal issues, so it’s worth checking for any potential sources of interference.

By taking these steps, you can improve your Wi-Fi signal strength without breaking the bank.

blink camera not recording

Camera placed too far from Wi-Fi router

If you’re experiencing connection issues with your Wi-Fi enabled camera, it could be because it’s placed too far from your router. A weak signal can cause disruptions in the streaming of footage and compromise the overall functioning of the camera. That’s why it’s important to check the strength of your Wi-Fi connection before positioning your camera.

You can do this by using your smartphone or computer to see if you’re getting a strong signal in the area where you want to place your camera. If the signal is weak, consider relocating your router or investing in a Wi-Fi extender to improve the connection. Remember, a strong Wi-Fi connection is a key factor in ensuring the effectiveness and reliability of your security camera system.

Check Camera Power

If you’re experiencing issues with your Blink camera not recording, one of the first things you should check is its power source. Your Blink camera may not be recording because the batteries are dead or low. Make sure the camera is properly plugged in and the batteries are fresh.

If the batteries are dead or low, the camera will not be able to capture any footage. Additionally, check the power source that the Blink camera is connected to. Is it plugged into a stable power outlet? Is the power outlet functioning properly? If not, it may be hindering the camera’s ability to record videos.

By ensuring that the power source is adequate, you can troubleshoot one of the most common problems that may be causing your Blink camera to not record.

Camera not charged or battery dead

If you’re having trouble turning on your camera, it’s possible that the battery may not be charged or could be dead. Before you panic, let’s check the power first. Make sure your camera is connected to a power source and charging properly.

If it’s a removable battery, try removing it and putting it back in. Sometimes, a loose connection can cause the battery not to charge properly. If you have a spare battery, try swapping them out to see if that solves the issue.

It’s essential to keep your camera battery charged to ensure it’s ready for any photo opportunity that comes your way. Don’t let a dead battery ruin your day, stay powered up and keep capturing those memorable moments.

Faulty power supply

If you’re experiencing issues with your surveillance camera, one of the most common causes is a faulty power supply. Before jumping to any conclusions, check if your camera is receiving a stable power source. Due to power fluctuations or surges, the camera may not be receiving the required amount of power to function effectively.

To check whether the power supply is the issue, first, check the cables. Ensure that all cables are securely plugged in and that there are no loose connections. If the power supply isn’t the issue, then there may be a malfunctioning component within the security camera.

In this scenario, it’s best to contact the manufacturer or a professional to have it repaired or replaced. Remember that a reliable power supply is critical for your surveillance camera as it ensures the proper functioning of the camera and improves its longevity.

Check Camera Settings

If you are facing the issue of your Blink camera not recording, the first thing you should check are the camera settings. Make sure that the motion detection is turned on and set at an appropriate level. Also, check if the camera is armed and if the Wi-Fi connection is stable.

Sometimes, interference from other devices can disrupt the camera’s ability to record. In such cases, try changing the Wi-Fi channel or moving the camera closer to the router. If the camera is placed outdoors, ensure that it is in a location with clear visibility and not obstructed by any objects.

Lastly, make sure that the Blink app is updated and functioning properly. By checking and adjusting these settings, you can help ensure that your Blink camera is recording all the important moments.

Camera on stand-by mode

If you’re using a camera that has a stand-by mode, it’s essential to check and adjust the settings before putting it in this mode. Stand-by mode keeps your camera ready to take a picture or record a video immediately, but it can also drain your battery faster than usual. So, it’s worth it to adjust the settings so that the camera uses less power while still being on standby mode.

Check if your camera has a sleep or power-saving mode, which automatically darkens or shuts off the LCD screen when the camera is idle. You can also turn off the Wi-Fi or Bluetooth in the camera if it’s not currently needed. This can save a lot of battery power and extend the life of your camera.

So, before putting your camera in stand-by mode, always ensure that the settings are optimized for a longer battery life.

Wrong recording schedule timings

When it comes to surveillance cameras, the recording schedule timings can be a bit tricky. It’s important to check the camera settings to ensure that the schedule is set up correctly. If the schedule is wrong, you may end up missing important footage or have unnecessary recordings taking up space.

For example, if you set your camera to record continuously but only need footage during certain hours of the day, you may be wasting storage space on irrelevant video. On the other hand, if you have critical moments that need to be captured, such as a break-in or theft, you need to make sure your camera is set to record during those hours. Double-checking your camera settings will save you time and hassle in the long run, ensuring that you have the footage you need when you need it.

So, take the time to review your settings and make sure your recording schedule timings are correct.

Contact Blink Customer Support

Have you noticed that your Blink camera isn’t recording anything? You’re not alone. Many people experience this issue with their security cameras. The first thing to check is the Wi-Fi signal strength in the area where the camera is installed.

Weak signal strength can cause the camera to disconnect from the network, which in turn will prevent it from recording any activity. Another reason for the Blink camera not to record is due to improper placement. If the camera is not placed in an ideal position, it can miss important events that it was supposed to capture.

Also, ensure that the camera is updated to the latest firmware version. If these steps do not solve the issue, reach out to Blink customer support for further assistance. The Blink experts can address any problem that you may have and help you get your camera up and running in no time.

Warranty details and contact information

If you have any issues with your Blink product, don’t hesitate to contact our customer support. Our team is available 24/7 to provide assistance and answer any questions you may have. Blink is committed to providing our customers with reliable and high-quality products, and we stand behind that commitment with our warranty offerings.

Each product comes with a limited warranty, which varies depending on the specific product and can be found on our website. Our warranty covers manufacturing defects and malfunctions, but it does not cover damage caused by misuse or neglect. If you need to make a warranty claim, please contact our customer support team, and they will assist you through the process.

Our team is dedicated to ensuring that every customer has a positive experience with Blink, so please don’t hesitate to reach out if you need help.


Looks like your Blink camera has decided to take an unannounced vacation and is not recording. Maybe it’s enjoying some well-deserved time off, trying to recharge its batteries. Or perhaps, it’s taking a break from all the recording and surveillance, trying to find some privacy in this always-connected world.

Either way, we hope your camera comes back soon, refreshed and ready to keep your home safe and secure. After all, we can’t have Bigfoot stealing your Amazon packages now, can we?


Why is my Blink camera not recording anything?
There could be several reasons why your Blink camera is not recording. It could be a connectivity issue, a low battery, or a problem with the motion detector.

How do I troubleshoot my Blink camera’s connection issue?
To troubleshoot connectivity issues, try resetting your router and camera, ensuring that your camera is within range of your Wi-Fi network, and checking if there are any obstructions blocking the signal.

How do I check the battery level of my Blink camera?
You can check the battery level of your Blink camera through the Blink app. Simply go to the Camera Settings and select Device Info. It will display the battery percentage.

What can cause the motion detector on my Blink camera to not work properly?
The motion detector on your Blink camera may not work properly due to low battery, incorrect camera placement, or interference from other devices in the area. Ensure that your camera is placed at a suitable height and angle and that there are no obstacles in its view.