Simple Steps to Swap Out a Blink Camera Battery: The Ultimate Guide

Have you noticed your Blink camera’s battery running low? Don’t worry, changing the battery is a simple process that can be done in just a few steps. Blink cameras are an excellent way to keep your home or business secure, but a low battery can render your camera useless. In this blog post, we’ll guide you through the process of changing the battery in your Blink camera.

Whether it’s your first time or you’ve done it before, this guide will make the process quick and straightforward. So, grab your tools and let’s get started!

Check Your Battery Level

One of the most important things to consider when using a Blink camera is to regularly check your battery level. This will ensure that your camera is always up and running to capture important footage. But if you do need to change the battery, it’s actually a quick and simple process.

To start, locate the compartment on the bottom of the camera and slide it open. Then, remove the old battery and replace it with a fresh one. Be sure to insert it correctly and securely before closing the compartment back up.

It’s that easy! Keeping a spare battery on hand is a good idea, so you’ll always have a back up when you need it. By checking your battery level regularly and changing the battery when needed, you can ensure that your Blink camera remains reliable and effective in capturing important moments.

Step 1: Open the Battery Compartment

One of the first steps to take when checking your battery level is to open the battery compartment. Depending on your device, this may be located on the back or the bottom of the device. Once you’ve located the compartment, slide it open carefully.

Inside you will find the battery, which you can remove to check its level. It may be helpful to have a voltage meter or battery tester on hand for a more accurate reading. Additionally, be sure to check the battery for any signs of damage or corrosion, as this can also affect its performance.

By regularly checking your battery level, you can ensure that you’ll never be caught with a dead device when you need it most.

how to change battery in a blink camera

Step 2: Remove the Old Battery

Before removing the old battery, it’s important to check its level to avoid any potential hazards. Begin by turning off your device to prevent any electrical currents from interfering with the battery removal process. Use a battery tester or multimeter to check the level of your battery.

If it’s below a certain voltage, it’s time to replace it. It’s important to note that different devices use different types of batteries, and some are not removable. For example, smartphones may require professional assistance or special tools to remove the battery safely.

Make sure to research and consult your device’s manual before proceeding with the battery removal process. Being cautious during this step will save you a lot of trouble in the long run.

Step 3: Insert the New Battery

When it comes to replacing the battery of your device, it’s important to check the battery level first. This will give you an idea of how much power your current battery still retains and help you determine if you need to replace it sooner rather than later. Once you have purchased a new battery for your device, carefully insert it into the designated compartment.

Make sure you follow the instructions provided in the user manual for your specific device as the process may vary depending on the model you own. It’s essential to be gentle and not force the battery in as this could cause damage to both the battery and your device. In addition, take note of any locking mechanisms or seals that need to be secured after the new battery is in place to prevent it from falling out or short-circuiting.

Remember to dispose of the old battery properly as it contains harmful chemicals that could harm the environment if not disposed of correctly. By following these simple steps, you’ll have a functioning device with a new battery that can power it for hours to come.

Tips for Extending Your Battery Life

Blink cameras are a popular choice for home surveillance due to their ease of use and reliable performance. However, with regular use, the battery life of the camera may start to dwindle. Fortunately, replacing the battery in a Blink camera is a straightforward process.

First, ensure that the camera is powered off and remove the back cover. Gently disconnect the battery cable and remove the battery. Insert the new battery and connect the cable, being careful not to damage any components in the process.

Once everything is securely in place, replace the back cover and turn the camera back on. By following these simple steps, you can extend the life of your Blink camera and ensure that your home remains protected.

Tip 1: Optimize Motion Detection Sensitivity

One of the best ways to extend your battery life for a motion detection device is to optimize the sensitivity settings. By adjusting the sensitivity, you can prevent the device from needlessly recording every tiny movement that occurs, which can quickly drain the battery. Instead, set the sensitivity to a level that detects only significant motion, such as people walking by or vehicles entering your property.

This will reduce false alerts and unnecessary recording, saving both battery and storage space. However, be wary of setting the sensitivity too low as it may fail to detect important events, compromising the device’s security functionality. With the right balance, you can optimize your motion detection device for efficiency and longevity.

Tip 2: Adjust Recording Length

When it comes to extending your battery life, there are a few tips and tricks that can really make a difference. One of the simplest things you can do is adjust your recording length. Whether you’re using your phone or a dedicated recording device, longer recording sessions can take a toll on your battery life.

By reducing the length of your recordings, you can free up precious battery power and potentially save yourself from having to charge mid-day. For example, let’s say you’re recording an important meeting or lecture. Rather than recording the entire session, consider breaking it up into smaller chunks or only recording key points.

This not only saves on battery, but it also makes it easier to review the content later on. Of course, adjusting your recording length isn’t always practical or possible. Some situations may require longer recordings or continuous monitoring.

In these cases, it’s important to have a backup plan in place. Consider investing in a portable battery pack or finding a nearby outlet where you can plug in your device. Overall, adjusting your recording length is a simple but effective way to extend your battery life.

By being mindful of your device’s power consumption and making small changes where you can, you can get more use out of your device and stay connected for longer.

Tip 3: Place Your Blink Camera in the Right Location

If you want to extend the battery life of your Blink camera, then placing it in the right location is crucial. This means finding a spot where the camera can capture the action you want to monitor without wasting battery power on unnecessary recordings. For example, if you want to keep an eye on the front door, make sure the camera is positioned to capture the entire entryway and nothing more.

You might also consider using a mount or bracket to stabilize the camera and prevent unnecessary motion detection. By choosing the right location for your Blink camera, you can maximize battery life and ensure that you never miss a moment of important surveillance. Remember, the better the camera can “see” the action, the more efficient it will be in conserving your battery power.

So, take some time to find the perfect spot for your Blink camera and reap the benefits of prolonged battery life.


In conclusion, changing the battery in a Blink camera is a breeze. It’s as simple as snapping the back cover off, replacing the old battery with a fresh one, and snapping the cover back on. And just like that, your Blink camera will be ready to capture all the action once again.

So don’t be left in the dark, stay charged and always keep an eye on your home with Blink. It’s a “blink and you’ll miss it” process, but the results are always crystal clear.”


What type of battery does a Blink camera use?
A Blink camera uses two AA lithium batteries.

How often do I need to change the batteries in my Blink camera?
The battery life of a Blink camera can vary depending on usage, but it is recommended to replace the batteries every 4-6 months.

How do I know when the batteries in my Blink camera need to be replaced?
When the battery icon in the Blink app turns red, it is time to replace the batteries.

Can I use rechargeable batteries in my Blink camera?
Yes, you can use rechargeable AA lithium batteries in your Blink camera. However, Blink does not recommend using non-lithium rechargeable batteries.

How do I change the batteries in my Blink camera?
To change the batteries, simply slide the battery compartment cover off the back of the camera, remove the old batteries, and insert the new ones. Make sure to put the batteries in the correct orientation.