Aosu Video Doorbell Pro Manual Your Full Setup Guide

The “Aosu Video Doorbell Pro Manual” is your definitive guide to seamless setup and maximizing your smart doorbell’s capabilities. It provides clear, step-by-step instructions for installation, app pairing, and utilizing advanced features like 2K HD video, AI human detection, and two-way audio. Unlock comprehensive home security with ease and confidence.

In an age where home security and convenience are paramount, smart video doorbells have emerged as indispensable tools for homeowners. They offer peace of mind, allowing you to see, hear, and speak to visitors from anywhere in the world. Among the myriad of options available, the Aosu Video Doorbell Pro stands out as a formidable contender, boasting an impressive array of features designed to elevate your home security experience. However, unlocking its full potential begins with a thorough understanding of its setup and operation.

While the prospect of installing new smart home tech might seem daunting to some, the process for the Aosu Video Doorbell Pro is remarkably straightforward when guided by the right instructions. This comprehensive guide aims to demystify every step, acting as an extended, practical companion to your official Aosu Video Doorbell Pro manual. We’ll walk you through everything from unboxing to advanced customization, ensuring you harness all the innovative capabilities this device has to offer.

Forget the guesswork and dive into a seamless setup experience. This article is your ultimate resource, meticulously detailing each stage of installation and configuration for your Aosu Video Doorbell Pro. By following these steps, complementing the information found within the official Aosu Video Doorbell Pro manual, you’ll not only install your doorbell correctly but also optimize its performance to safeguard your home effectively and efficiently.

Key Takeaways

• Charge Fully First: Ensure the doorbell is charged before beginning any setup.
• Confirm Wi-Fi Strength: Verify strong 2.4GHz Wi-Fi signal at the install location.
• Download Aosu App: Install the official Aosu app for guided setup and control.
• Follow In-App Steps: Utilize the app’s instructions for smooth pairing and installation.
• Securely Mount Doorbell: Choose an optimal viewing angle and use provided hardware.
• Customize Motion Zones: Adjust detection areas to minimize unwanted notifications.
• Test All Features: Verify live view, audio, and alerts are working correctly.

Unboxing Your Aosu Video Doorbell Pro and Initial Preparations

The journey to a smarter, more secure home begins the moment you open the box. Before you start drilling or connecting wires, it’s crucial to understand what you have and what you might need. A good first step is always to consult the Aosu Video Doorbell Pro manual that comes with your device, as it provides specific details for your model.

What’s Inside the Box?

Upon unboxing your Aosu Video Doorbell Pro, you should find a neatly packed assortment of components essential for its operation. Familiarizing yourself with these items will make the setup process much smoother. Typically, the package contents, as outlined in the Aosu Video Doorbell Pro manual, include:

• Aosu Video Doorbell Pro Unit: The main device, featuring the camera, motion sensor, and doorbell button.
• Wireless Chime: A plug-in unit that notifies you when the doorbell is pressed.
• Mounting Bracket: The base plate used to secure the doorbell to your wall.
• Charging Cable (USB-C): For recharging the doorbell’s internal battery.
• Mounting Screws and Wall Anchors: For secure installation.
• Wiring Harness (for wired installation): If you plan to connect to existing doorbell wiring.
• Angle Mount (optional): To adjust the viewing angle for optimal coverage.
• Security Screws and Tool: To prevent theft and tampering.
• Quick Start Guide & Aosu Video Doorbell Pro Manual: Your indispensable guides for setup and troubleshooting.

Always cross-reference this list with the packaging contents specified in your Aosu Video Doorbell Pro manual to ensure nothing is missing.

Charging Your Doorbell

For battery-powered installations, the very first step, even before thinking about mounting, is to fully charge your Aosu Video Doorbell Pro. The Aosu Video Doorbell Pro manual emphasizes this to ensure the device has sufficient power for the initial setup and optimal performance out of the box.

• Locate the USB-C charging port on the back or bottom of the doorbell unit.
• Connect the provided USB-C cable to the doorbell and the other end to a standard USB power adapter (not always included).
• An LED indicator on the doorbell will typically show its charging status (e.g., solid red for charging, solid blue for fully charged). Refer to your Aosu Video Doorbell Pro manual for exact LED meanings.
• Allow several hours for a full charge, which can significantly extend the battery life before the first recharge is needed.

Essential Tools You’ll Need (Not Included)

While your Aosu Video Doorbell Pro comes with some basic tools, there are a few common household items you’ll want to have on hand to make the installation process smooth and efficient, as often recommended in the Aosu Video Doorbell Pro manual:

• Power Drill and Drill Bits: For making pilot holes for screws and anchors.
• Screwdriver (Phillips-head): For securing screws.
• Pencil: For marking drilling locations.
• Level: To ensure your doorbell is mounted perfectly straight.
• Safety Glasses: Essential for protecting your eyes when drilling.
• Electrical Tape: (Only for wired installations) To secure connections.
• Wire Strippers: (Only for wired installations) If you need to expose more wire.

Having these tools ready will save you time and frustration during installation, making sure you can follow the steps in the Aosu Video Doorbell Pro manual without interruptions.

Getting Started with the Aosu App and Initial Configuration

The Aosu Video Doorbell Pro is a smart device, and like most smart devices, it requires a companion app to unlock its full capabilities. The app serves as your central control hub for viewing live footage, adjusting settings, receiving alerts, and much more. The Aosu Video Doorbell Pro manual will guide you to the correct app.

Downloading and Installing the Aosu App

This is your gateway to managing your new doorbell. The Aosu app is available on both major mobile platforms.

• For iOS devices: Open the App Store, search for “Aosu,” and download the official app.
• For Android devices: Open the Google Play Store, search for “Aosu,” and download the official app.
• Alternatively, many Aosu Video Doorbell Pro manual versions include a QR code that you can scan with your phone’s camera to directly access the correct app download link.

Ensure you download the correct app, as there might be other security camera apps with similar names. The icon should clearly represent Aosu products.

Creating Your Aosu Account

Once the app is installed, you’ll need to create an Aosu account to register your device and manage your settings securely. This process is standard for most smart home devices and is detailed in the Aosu Video Doorbell Pro manual.

• Open the Aosu app.
• Tap “Register” or “Sign Up.”
• Enter your email address and create a strong password. It’s advisable to use a unique password for security.
• You may need to verify your email address by clicking a link sent to your inbox.
• Once your account is created, log in.

Adding Your Aosu Video Doorbell Pro to the App

This is where your physical doorbell connects to your digital world. The pairing process is critical and requires attention to detail, as highlighted in the Aosu Video Doorbell Pro manual.

• Ensure your fully charged Aosu Video Doorbell Pro is nearby and powered on.
• Open the Aosu app and tap the “+” icon (usually in the top right corner) to add a new device.
• Select “Video Doorbell” or search for your specific model (Aosu Video Doorbell Pro).
• The app will instruct you to put the doorbell into pairing mode. This usually involves pressing and holding a button on the doorbell for a few seconds until an indicator light flashes (refer to the Aosu Video Doorbell Pro manual for the specific button and LED pattern).
• You’ll be prompted to connect your phone to your home’s 2.4GHz Wi-Fi network. The Aosu Video Doorbell Pro typically only supports 2.4GHz Wi-Fi for better range and penetration, so ensure your phone is connected to this band before proceeding.
• The app will then generate a QR code. Hold your phone’s screen with the QR code in front of the doorbell’s camera, about 4-8 inches away, until you hear a confirmation sound from the doorbell.
• Once the doorbell acknowledges the QR code, it will attempt to connect to your Wi-Fi network. This may take a minute or two.
• After successful connection, you can give your doorbell a name (e.g., “Front Doorbell”) and complete the setup.

If you encounter issues, double-check your Wi-Fi password, ensure you’re on a 2.4GHz network, and try restarting both your phone and the doorbell, as suggested in the troubleshooting section of the Aosu Video Doorbell Pro manual.

Chime Setup and Pairing

The wireless chime is an integral part of your doorbell system, ensuring you hear visitors even when your phone isn’t nearby. The Aosu Video Doorbell Pro manual outlines its simple pairing process.

• Plug the wireless chime into a power outlet in a central location within your home.
• Usually, the chime will be in pairing mode automatically or can be put into pairing mode by pressing a button (check your Aosu Video Doorbell Pro manual for specifics).
• Once the doorbell is paired with the app, press the doorbell button. The chime should ring, indicating a successful connection.
• Within the Aosu app, or via buttons on the chime itself, you can typically adjust the chime’s volume and select different ringtones.

Physical Installation of Your Aosu Video Doorbell Pro

With the app configured and your doorbell paired, it’s time for the physical installation. This stage requires careful consideration to ensure optimal performance and security. Always review the detailed diagrams and instructions in your Aosu Video Doorbell Pro manual before beginning.

Choosing the Ideal Mounting Location

Where you install your Aosu Video Doorbell Pro can significantly impact its effectiveness. The Aosu Video Doorbell Pro manual provides general guidelines, but personal assessment is key.

• Height: The recommended mounting height is typically around 48 inches (1.2 meters) from the ground. This height allows the camera to capture faces clearly and the motion sensor to detect movement effectively.
• Wi-Fi Signal Strength: Before drilling, hold your doorbell at the desired location and check the Wi-Fi signal strength in the Aosu app. A strong signal is crucial for reliable performance.
• Viewing Angle: Ensure the doorbell has an unobstructed view of your entryway. If your door is recessed or at an angle, consider using the included angle mount (if applicable) to optimize the field of view.
• Sun Glare: Try to avoid direct sunlight hitting the camera lens for extended periods, as this can cause glare and washed-out video.
• Obstructions: Be mindful of walls, pillars, or plants that might block the camera’s view or the motion sensor’s detection range.

Mounting Options: Wireless vs. Wired

The Aosu Video Doorbell Pro typically offers flexibility, allowing for both battery-powered wireless installation and wired installation using existing doorbell wiring. Your Aosu Video Doorbell Pro manual will detail both methods.

Wireless (Battery-Powered) Installation:

This is the simpler option, ideal for homes without existing doorbell wiring or for those who prefer not to deal with electrical connections. The battery life, as specified in the Aosu Video Doorbell Pro manual, makes this a convenient choice.

1. Mark Drill Holes: Hold the mounting bracket against the wall at your chosen height. Use a pencil to mark the positions for the drill holes.
2. Drill Holes: Using your power drill and an appropriate drill bit (check your Aosu Video Doorbell Pro manual for recommended bit size), drill holes at the marked locations.
3. Insert Wall Anchors: If you’re drilling into masonry or stucco, gently tap the plastic wall anchors into the drilled holes until they are flush with the surface.
4. Secure Mounting Bracket: Align the mounting bracket with the holes and use the provided screws to firmly attach it to the wall.
5. Attach Doorbell: Slide the Aosu Video Doorbell Pro unit onto the mounting bracket. It should click securely into place.
6. Secure with Security Screw: Use the small security screw (and accompanying tool) at the bottom of the doorbell to lock it onto the bracket, preventing easy removal. This step is crucial for security and is clearly shown in the Aosu Video Doorbell Pro manual.

Wired (Existing Doorbell Wiring) Installation:

If you have existing doorbell wiring, you can use it to provide continuous power to your Aosu Video Doorbell Pro, eliminating the need for periodic battery recharges. Always turn off power to your existing doorbell at the breaker box before handling any wiring! Safety first, as emphasized in the Aosu Video Doorbell Pro manual.

1. Turn Off Power: Locate your home’s circuit breaker box and turn off the power to your existing doorbell circuit. Test the old doorbell to ensure it’s off.
2. Remove Old Doorbell: Unscrew and carefully remove your existing doorbell button. Disconnect the two wires attached to it.
3. Connect Wires to Bracket: The Aosu mounting bracket will have terminals for these wires. Connect one wire to each terminal. It usually doesn’t matter which wire goes to which terminal, but consult your Aosu Video Doorbell Pro manual for specific wiring diagrams. Ensure the connections are secure.
4. Secure Mounting Bracket: Attach the mounting bracket to the wall using the provided screws and anchors, feeding the wires through the center opening.
5. Attach Doorbell: Connect the doorbell unit to the terminals on the mounting bracket (if not already integrated into the bracket) and then slide the Aosu Video Doorbell Pro onto the bracket.
6. Secure with Security Screw: Fasten the security screw at the bottom to lock the doorbell in place.
7. Restore Power: Go back to your circuit breaker and restore power to the doorbell circuit. Your Aosu Video Doorbell Pro should power on.

If you are uncomfortable working with electrical wiring, it is highly recommended to consult a qualified electrician. The Aosu Video Doorbell Pro manual will also advise professional help for complex wiring scenarios.

Testing the Installation

Once the physical installation is complete, it’s time for final checks.

• Physical Firmness: Gently try to wiggle the doorbell to ensure it’s securely mounted and doesn’t feel loose.
• Camera View: Open the Aosu app and check the live view. Confirm that the camera captures the desired area and that there are no immediate obstructions.
• Motion Detection: Walk past the doorbell within its detection zone to trigger a motion alert. Check if you receive a notification on your phone.
• Doorbell Press: Press the doorbell button. Verify that your phone receives a call notification and that the indoor chime rings.

If anything isn’t working as expected, refer to the troubleshooting section of your Aosu Video Doorbell Pro manual for guidance.

Deep Dive into Aosu App Settings and Features

The true power of your Aosu Video Doorbell Pro lies within its intuitive companion app. After installation, spending time customizing the settings will significantly enhance its performance and tailor it to your specific security needs. The Aosu Video Doorbell Pro manual provides an overview, but this section offers a deeper dive.

Customizing Motion Detection

Effective motion detection is crucial for proactive security. The Aosu app offers robust customization options.

• PIR vs. AI Detection: Understand the difference. PIR (Passive Infrared) detects heat signatures, reducing false alerts from inanimate objects. AI (Artificial Intelligence) detection, if available, can specifically identify humans, vehicles, or pets, further refining alerts. The Aosu Video Doorbell Pro manual will specify which detection types are available.
• Sensitivity Levels: Adjust the sensitivity from low to high based on your environment. A busy street might require lower sensitivity, while a quiet cul-de-sac could handle higher.
• Activity Zones: Draw specific zones within the camera’s view where you want motion to be detected, ignoring areas like public sidewalks or busy roads to minimize unnecessary alerts.
• Detection Schedule: Set specific times during the day or night when motion detection should be active or inactive.

Experiment with these settings to find the perfect balance that provides meaningful alerts without overwhelming you with false alarms. The Aosu Video Doorbell Pro manual can help you navigate these options.

Video and Audio Settings

Optimize your viewing and communication experience.

• Video Resolution: Choose between available resolutions (e.g., 1080p, 2K) depending on your network bandwidth and desired video quality. Higher resolution provides clearer images but consumes more bandwidth and storage.
• Night Vision: Ensure night vision is enabled (it usually is by default). Some models may offer color night vision options.
• Two-Way Talk Volume: Adjust the microphone and speaker volumes for clear two-way communication with visitors.
• Sound Detection: Beyond motion, the doorbell can often detect unusual sounds. Configure sensitivity for this feature if you desire.

Your Aosu Video Doorbell Pro manual will detail the specific video and audio capabilities of your model.

Storage Options: Local vs. Cloud

The Aosu Video Doorbell Pro typically offers flexible storage solutions for your recorded events.

• MicroSD Card (Local Storage): If your doorbell supports a MicroSD card slot, you can insert a card (usually up to 128GB, check the Aosu Video Doorbell Pro manual for supported sizes) for continuous recording or event-based recording. This provides a cost-effective way to store footage directly on the device without monthly fees. Remember to format the card via the app after insertion.
• Cloud Storage: Aosu usually offers subscription-based cloud storage plans. These provide off-site backup of your recordings, often with additional features like longer video history, advanced AI detection, and clip sharing. Cloud storage ensures your footage is safe even if the doorbell is stolen or damaged.

The Aosu Video Doorbell Pro manual will describe how to install the MicroSD card and provide details on cloud service trials or subscriptions.

Privacy Zones and Security Features

Privacy is paramount, and Aosu allows you to manage what your camera records.

• Privacy Zones: Designate specific areas within the camera’s view to be excluded from recording. This is useful for respecting neighbors’ privacy or excluding areas you don’t need to monitor.
• Data Encryption: Aosu typically employs encryption to protect your video streams and personal data. Ensure this feature is active.
• Account Security: Always use a strong, unique password for your Aosu account and enable two-factor authentication (2FA) if available for an extra layer of security.

Details on setting up privacy zones are usually covered in the Aosu Video Doorbell Pro manual.

Integrating with Smart Home Ecosystems

For enhanced convenience, your Aosu Video Doorbell Pro can often integrate with popular smart home platforms like Amazon Alexa or Google Home.

• Linking Accounts: Open your Alexa or Google Home app, search for the Aosu skill/action, and link your Aosu account.
• Voice Commands: Once linked, you can use voice commands to view your doorbell’s live feed on compatible smart displays (e.g., “Alexa, show me the front door”).
• Automations: Create routines (e.g., have a smart light turn on when motion is detected at night).

The exact integration steps and supported features will be outlined in the Aosu Video Doorbell Pro manual or Aosu’s online support documentation.

Maintenance, Troubleshooting, and Advanced Tips

To ensure your Aosu Video Doorbell Pro continues to operate flawlessly and provide reliable security, a little ongoing maintenance and an understanding of common troubleshooting steps are essential. Your Aosu Video Doorbell Pro manual is an excellent first point of reference for these topics.

Battery Management and Charging Best Practices

For battery-powered installations, effective battery management is key.

• Expected Battery Life: The battery life can vary significantly based on activity (motion events, live views), temperature, and Wi-Fi signal strength. The Aosu Video Doorbell Pro manual will give an estimated range.
• Low Battery Alerts: The Aosu app will typically send you notifications when the battery is low. Don’t ignore these alerts.
• Charging Frequency: Aim to recharge before the battery completely drains. Regular, deep discharges can sometimes impact long-term battery health.
• Use the Provided Charger: Always use the official Aosu charging cable and a reputable USB power adapter to ensure safe and efficient charging, as advised in the Aosu Video Doorbell Pro manual.
• Consider Wired Installation: If frequent charging becomes an inconvenience, switching to a wired installation (if feasible) offers continuous power.

Keeping Your Doorbell Clean

A clear camera lens is vital for clear video quality.

• Lens Cleaning: Periodically wipe the camera lens with a soft, clean, microfiber cloth. Avoid abrasive cleaners that could scratch the lens.
• General Cleaning: Wipe down the rest of the doorbell unit to remove dust, dirt, or spiderwebs that could obstruct sensors or build up over time.

Common Troubleshooting Scenarios

Even with a robust device like the Aosu Video Doorbell Pro, minor issues can arise. Here are some common problems and solutions, many of which are detailed in your Aosu Video Doorbell Pro manual:

• Doorbell Not Connecting to Wi-Fi:
  • Ensure your Wi-Fi router is on and the 2.4GHz band is enabled.
  • Check the Wi-Fi signal strength at the doorbell’s location using your phone.
  • Verify your Wi-Fi password is correct in the app.
  • Try restarting your router, then the doorbell.
  • Perform a factory reset on the doorbell (refer to the Aosu Video Doorbell Pro manual for reset instructions) and attempt to pair it again.
• Motion Detection Issues (Too Many/Too Few Alerts):
  • Adjust motion sensitivity settings in the app.
  • Refine activity zones to exclude irrelevant areas.
  • Ensure the camera lens is clean and unobstructed.
  • Check if the doorbell is mounted at the recommended height.
• Poor Video Quality:
  • Clean the camera lens thoroughly.
  • Check your Wi-Fi signal strength; a weak signal can degrade video quality.
  • Ensure your internet connection speed is adequate for streaming high-resolution video.
  • Adjust video resolution settings in the app to a lower setting if bandwidth is an issue.
• Chime Not Working:
  • Ensure the chime is plugged in and powered on.
  • Re-pair the chime with the doorbell through the Aosu app or by following instructions in the Aosu Video Doorbell Pro manual.
  • Check chime volume settings.

For more specific or persistent issues, always consult the comprehensive troubleshooting guide in your Aosu Video Doorbell Pro manual or Aosu’s online support resources.

Firmware Updates

Firmware updates are crucial for the security and functionality of your Aosu Video Doorbell Pro. They often bring new features, performance improvements, and security patches.

• Enable Auto-Updates: If available in the app, enable automatic firmware updates.
• Manual Updates: Periodically check the app’s settings for available firmware updates. Follow the on-screen instructions carefully during an update, ensuring the doorbell remains powered on and connected to Wi-Fi.

Advanced Settings and Features

Beyond the basics, your Aosu Video Doorbell Pro may offer more advanced functionalities:

• Quick Replies: Pre-recorded messages you can play when you’re unable to speak to visitors.
• Event Logging: Reviewing a history of all motion detections, doorbell presses, and live view activations.
• Sharing Access: Granting family members or trusted individuals access to your doorbell’s live feed and notifications through the Aosu app. The Aosu Video Doorbell Pro manual will detail how to do this securely.

Aosu Video Doorbell Pro Key Specifications

For quick reference, here are some typical specifications you’d find detailed in your Aosu Video Doorbell Pro manual. Please note that specifications can vary slightly by model version.

Feature	Specification
Video Resolution	2K (2560×1440) HD
Field of View (FoV)	166° (Diagonal)
Motion Detection	PIR & AI Human/Vehicle Detection
Night Vision	Infrared (up to X feet, check specific manual)
Audio	Two-way Audio with Noise Cancellation
Power Source	Rechargeable Battery (e.g., 6500mAh) or 8-24V AC Wired
Wi-Fi Connectivity	2.4GHz Wi-Fi (IEEE 802.11 b/g/n)
Local Storage	MicroSD Card Slot (up to 128GB, Class 10 recommended)
Cloud Storage	Subscription-based option available
Operating Temperature	-4°F to 122°F (-20°C to 50°C)
Weather Resistance	IP65 (or similar, consult Aosu Video Doorbell Pro manual)

These specifications highlight the robust capabilities of the Aosu Video Doorbell Pro, underscoring why familiarizing yourself with your Aosu Video Doorbell Pro manual is so important for leveraging these features.

Conclusion

Embarking on the journey to secure your home with a smart video doorbell is an excellent decision, and with the Aosu Video Doorbell Pro, you’ve chosen a powerful and reliable device. We’ve traversed the entire landscape of setting up, configuring, and optimizing your Aosu Video Doorbell Pro, from the initial unboxing and charging to advanced app settings and ongoing maintenance. Every step outlined here, in conjunction with the indispensable information found in your official Aosu Video Doorbell Pro manual, is designed to empower you with confidence and knowledge.

By diligently following these guidelines and taking the time to personalize the settings within the Aosu app, you’re not just installing a doorbell; you’re integrating a sophisticated security guardian into your home. The enhanced vigilance, convenient communication, and peace of mind that the Aosu Video Doorbell Pro offers are truly invaluable. Remember, for any specific technical details or troubleshooting unique to your device’s model, the Aosu Video Doorbell Pro manual remains your ultimate authoritative source.

Now that you’re equipped with a comprehensive understanding of your device, it’s time to enjoy the unparalleled security and convenience that your fully functional Aosu Video Doorbell Pro brings to your doorstep. Welcome to a smarter, safer home!

Frequently Asked Questions

How do I install my Aosu Video Doorbell Pro?

This manual provides step-by-step instructions for both wired and wireless installation options, ensuring a smooth setup process. You’ll find detailed diagrams and best practices to securely mount your Aosu doorbell and get it ready for use.

What app do I need and how do I connect my Aosu Video Doorbell Pro to my Wi-Fi network?

The Aosu Video Doorbell Pro connects via the Aosu app, which is available for download on both iOS and Android devices. The manual guides you through creating an account, adding your device, and connecting it to your home’s 2.4GHz Wi-Fi network for optimal performance.

Does the Aosu Video Doorbell Pro use a battery, or does it need to be hardwired?

The Aosu Video Doorbell Pro offers flexible power options, supporting both wired installation to existing doorbell wiring and an internal rechargeable battery. The manual details how to charge the battery and connect it to your home’s electrical system if you prefer the hardwired setup.

My Aosu Video Doorbell Pro isn’t connecting to the internet or showing video. What should I do?

Refer to the comprehensive troubleshooting section in the Aosu Video Doorbell Pro manual for common connectivity issues. It provides solutions for Wi-Fi problems, signal interference, and offers steps for resetting your device to resolve most technical difficulties.

How does motion detection work on the Aosu Video Doorbell Pro, and where are videos stored?

The Aosu Video Doorbell Pro features advanced PIR motion detection with customizable activity zones and sensitivity settings to minimize false alerts. Your video recordings can be stored securely in the cloud via an Aosu subscription or locally on an SD card, as detailed in the manual.

Is the Aosu Video Doorbell Pro compatible with my existing indoor chime?

The manual specifies compatibility information regarding various existing indoor chime types, including mechanical and electronic chimes. It also outlines the necessary wiring and setup steps to connect your Aosu Video Doorbell Pro to your current chime system, ensuring you hear alerts inside your home.