You have finally decided to upgrade your home security with a Blink Video Doorbell. It is a smart move. Blink offers some of the most reliable, battery-efficient, and user-friendly smart doorbells on the market today. But here is the thing that catches almost every first-time buyer off guard: the doorbell itself is only half the equation. The mount you choose determines whether your device captures the face of a package thief or just the top of their hat, whether it survives a harsh winter or cracks in the first freeze, and whether installation takes ten minutes or a frustrating Saturday afternoon.
This guide exists because the “Blink Doorbell Door Mount” category is deceptively complex. You are not just buying a piece of plastic or metal. You are buying the correct angle for your specific porch geometry. You are buying the material that matches your climate. You are buying the security hardware that prevents a thief from walking away with your $100 camera in ten seconds. We have spent countless hours analyzing mounting hardware, reading thousands of verified user reviews, testing installation scenarios on various surfaces (brick, vinyl siding, stucco, wood, metal door frames), and consulting with professional installers. What you will learn here goes far beyond a simple spec sheet.
By the time you finish reading, you will know exactly which mount type solves your specific installation headache, how to decode the technical jargon that manufacturers use to upsell you, and precisely how much you should spend to get a secure, long-lasting installation without overpaying for features you will never use. Let us dive in.
What to Look for When Buying Blink Doorbell
1. Mounting Surface Compatibility
This is the single most critical factor, yet it is the most frequently overlooked. You cannot simply buy “a mount.” You must buy the mount designed for the specific material you are attaching it to. A standard screw kit included with the Blink Doorbell works perfectly for wood door frames. It fails miserably on brick, concrete, stucco, vinyl siding, or aluminum fascia. If you try to drive standard wood screws into brick without anchors, the screws will spin freely and the doorbell will fall off within days. If you drive them into vinyl siding without a mounting block, you will crack the siding, void your home’s warranty, and create a water intrusion point.
For brick, stone, or concrete, you need a mount that includes masonry anchors (often called Tapcons or sleeve anchors) or a mounting plate designed to distribute weight across multiple anchor points. For vinyl siding, you absolutely need a vinyl siding mounting block (often called a J-block or utility block) that clamps onto the siding profile without penetrating the weather barrier, or a mount with a wide base plate that spans the hollow back of the siding panel. For metal door frames (common in apartments and condos), you need self-tapping metal screws or, better yet, a no-drill adhesive mount or a clamp-style mount that grips the frame edge. Always identify your surface material before you click “Add to Cart.”
2. Viewing Angle and Wedge Adjustments
The Blink Video Doorbell has a field of view of roughly 155 degrees diagonal. That sounds wide, but physics is unforgiving. If your doorbell is mounted flush against a deep door frame, or if your front door is recessed into the entryway, a flat mount will point the camera straight at the side wall of your porch. You will see the wall, not the visitor. This is where wedge kits (angle mounts) become essential. These mounts tilt the doorbell down (usually 5, 15, 25, or 45 degrees) or left/right (corner mounts).
You need a downward wedge if: your doorbell is mounted above 48 inches from the ground (standard height), your door is recessed more than 4 inches, or you want to see packages on the ground directly in front of the door. You need a corner/horizontal wedge if: your door is on a side wall and you need to view the walkway approaching the door, or the only mounting spot is on a door frame perpendicular to the street. Many third-party mounts now offer adjustable ball joints or multi-piece wedge systems that let you dial in the perfect angle down to the degree. This adjustability is worth its weight in gold because it eliminates the “guess and drill” method where you drill holes, test the view, realize it is wrong, and drill new holes.
3. Build Material and Weather Resistance
Your mount lives outside 24/7/365. It bakes in 110°F summer sun, freezes in -20°F winter nights, gets pounded by rain, snow, and hail, and is blasted by UV radiation. Cheap plastic mounts (often unbranded imports under $10) use low-grade ABS or polypropylene that becomes brittle after one summer of UV exposure. They crack when you tighten the screws, they warp in heat (changing your camera angle), and they shatter on impact. A cracked mount means a fallen doorbell. A fallen doorbell means a broken doorbell.
Look for mounts made from: UV-stabilized polycarbonate (often labeled “UV resistant” or “outdoor rated”), glass-filled nylon (extremely strong, used in automotive engine parts), aluminum alloy (powder-coated or anodized to prevent corrosion), or 304/316 stainless steel hardware. The screws included are just as important as the mount body. Standard zinc-plated steel screws will rust within months, staining your siding or brick with orange streaks and eventually seizing so you cannot remove the doorbell to charge the battery. Insist on stainless steel (304 for most climates, 316 for coastal/salt-air environments) or coated deck screws rated for ACQ-treated lumber if mounting to wood.
4. Security and Anti-Theft Features
A Blink Doorbell is a tempting target. It sits at eye level, unattended, worth $50-$100 on the secondary market. A determined thief with a screwdriver can remove a standard mount in 15 seconds. If your mount only uses the two standard mounting screws accessible from the front or bottom, you have zero theft deterrence. Premium mounts address this in several ways. Some use a locking set screw (requiring a hex key) that secures the doorbell to the mount body, accessible only from the bottom or rear. Others use a security Torx bit (pin-in-Torx) that requires a specialized driver most thieves do not carry. The most robust designs use a two-piece system: a base plate screwed permanently to the wall with security screws, and a camera bracket that locks onto the base plate with a recessed set screw hidden inside the battery compartment or behind a cover.
If you live in a high-traffic area, an apartment complex, or a neighborhood with package theft issues, anti-theft hardware is not optional—it is insurance. Also consider the wiring path. If you are hardwiring your Blink (for continuous power and chime integration), the mount should protect the wire connections from being snipped or pulled. Some mounts include a wire channel or cover plate.
5. Installation Complexity and Included Hardware
Nothing kills the excitement of a new gadget faster than realizing you need a trip to the hardware store because the included anchors are wrong for your wall, the screws are too short, or you need a drill bit size you do not own. A quality mount kit should be a true “kit.” It should include: the mount body, a drilling template (paper or cardboard sticker you tape to the wall to mark hole positions perfectly), the correct drill bits (masonry bit for brick/concrete, wood bit for frames), the correct anchors (plastic expansion anchors for brick, toggle bolts for hollow walls, wood screws for frames), stainless steel mounting screws (multiple lengths), a screwdriver bit (matching the screw heads), and wire nuts or gel-filled connectors if hardwiring.
Some premium kits even include a bubble level printed on the template or a small torpedo level. The instructions should be clear, pictorial, and specific to Blink models (Video Doorbell, Video Doorbell 2024 release, etc.). Video installation guides (QR code linked) are a huge plus. If a product listing shows only the mount and “screws included” with no detail, assume the hardware is generic low-quality junk and budget for a separate hardware kit.
6. Aesthetics and Form Factor
Your front door is the face of your home. A bulky, industrial-looking mount can clash with your architecture and curb appeal. Mounts come in several profiles: Low-profile flat mounts (cleanest look, least adjustment), Wedge mounts (visible angle, functional look), Corner mounts (L-shaped, wraps the corner), and Recessed/Flush mounts (requires cutting into the wall/frame, cleanest but most labor). Color matters too. Most mounts come in Black or White to match the Blink doorbell body. Some offer Silver/Brushed Aluminum or Bronze/Copper finishes to match door hardware or light fixtures. If you have a white doorbell on a dark brick wall, a white mount stands out. A black mount blends. Some third-party mounts are paintable (polycarbonate and aluminum take spray paint well if prepped with plastic primer). Measure the footprint. A massive mounting plate on a narrow door frame looks clumsy. Ensure the mount dimensions fit your available flat surface.
7. Battery Access and Maintenance
This is a practical detail that affects you every few months. The Blink Video Doorbell (battery-powered model) requires you to remove the entire unit from the mount to recharge the internal battery via USB-C. If your mount uses security screws that require a special tool, you must keep that tool accessible (not in a toolbox in the garage attic) every time you need to charge. Some mounts feature a quick-release lever or a thumb-screw for the camera-to-mount connection, while the mount-to-wall connection remains permanent and secure. This is a brilliant design: the camera comes off in seconds for charging, but the mount stays bolted to the house, and a thief cannot remove the camera without the tool for the mount-to-wall screws. Consider your physical ability. If you have mobility issues or the doorbell is mounted high (requiring a ladder), a tool-free quick-release mechanism is a quality-of-life necessity, not a luxury.
8. Warranty and Brand Support
Mounts are structural safety devices. If a mount fails, your doorbell falls and breaks. Blink’s own mounts (sold by Amazon) carry the Blink/Amazon warranty and support infrastructure. Major third-party brands (Wasserstein, Suptig, MountGenie, Dotty, etc.) offer their own warranties, typically 1-year to Lifetime. Cheap no-name brands offer “30-day return via Amazon” and zero support after that. A warranty signals the manufacturer’s confidence in their material choice and engineering. It also gives you recourse if the plastic warps, the screws snap, or the coating peels. Read the warranty terms. Does it cover the mount only, or the doorbell if the mount fails? Most cover the mount only, but some premium brands offer a “device protection guarantee” (terms apply). Support responsiveness matters. If you are stuck on installation at 7 PM on a Sunday, a brand with live chat or a detailed video library saves the day.
Different Types of Blink Doorbell
Common Buying Mistakes to Avoid
❌ Mistake: Assuming the Included Mount Works Everywhere
Why it’s bad: The Blink box includes a basic flat mount and wood screws. That is it. No masonry anchors. No vinyl siding block. No wedge. No security screws. If you mount to brick, stucco, or vinyl using the included hardware, you are gambling with your device and your home’s exterior. The included mount is a “starter” mount for ideal conditions only.
What to do instead: Identify your mounting surface material first. Then buy a mount kit explicitly labeled for that material (e.g., “Brick/Concrete Mount Kit with Masonry Anchors” or “Vinyl Siding Mount Block Kit”). Spend the extra $10-$15. It saves you a failed install, a trip to the hardware store, and potential water damage.
❌ Mistake: Ignoring the “Recessed Door” Problem
Why it’s bad: You mount the doorbell flush on the door frame. You open the app. You see the side wall of your porch. You cannot see the porch floor or the visitor’s face. You have to remount. This wastes time, leaves extra holes, and weakens the mounting surface.
What to do instead: Measure your recess depth. Stand at your door. Hold the doorbell (or a phone) against the proposed mount spot. Look at the screen. If you see the side wall, you need a wedge. Rule of thumb: Recess > 3 inches = need 15-25 degree down wedge. Recess > 6 inches = need 25-45 degree down wedge OR a corner mount on the side wall facing the walkway. Buy the wedge kit with the doorbell.
❌ Mistake: Buying the Cheapest Plastic Mount on the Market
Why it’s bad: That $6.99 mount uses recycled plastic with no UV stabilizers. In 6 months, it fades to chalky white/gray. In 12 months, the screw bosses crack. In 18 months, the mount snaps off in a wind storm or when you pull the doorbell to charge. You lose the doorbell. You damage your wall. You buy another mount. You have spent more than buying a quality mount once.
What to do instead: Set a minimum budget of $15-$20 for the mount. Look for “UV Stabilized,” “Polycarbonate,” “Glass-Filled Nylon,” or “Aluminum.” Read 1-year and 2-year reviews, not just the 5-star “easy install” reviews from day one. Look for comments on long-term durability.
❌ Mistake: Overlooking Battery Removal Clearance
Why it’s bad: You install a tight-fitting anti-theft cage or a mount with a lip that overlaps the battery door. Six months later, you need to charge. You cannot open the battery door. You cannot slide the camera off the mount. You have to unscrew the entire mount from the wall to charge the battery. You skip charging. The battery dies. You have a dummy doorbell.
What to do instead: Check the product photos and Q&A. Does the mount clear the bottom USB-C port and the battery release latch? Does the anti-theft cage have a cutout for the latch? If using a security screw on the camera-to-mount joint, is the tool (hex key/Torx) standard and easy to keep handy? Prioritize quick-release camera-to-mount designs.
❌ Mistake: Using the Wrong Anchors for the Substrate
Why it’s bad: Plastic expansion anchors in old, crumbly brick? They pull out. Toggle bolts in solid concrete? They won’t expand. Wood screws in metal door frame? They strip the thin metal. Drywall anchors on exterior stucco? They dissolve in rain. The mount fails. The doorbell falls.
What to do instead: Match the anchor to the substrate behind the surface. Solid brick/concrete/stone = Sleeve anchors (Tapcon) or Wedge anchors. Hollow concrete block = Toggle bolts or Hollow-wall anchors. Wood stud/frame = Coated deck screws (2.5″ – 3″) into the stud, not just the trim. Metal frame = Self-tapping metal screws (#8 or #10) with washers. Vinyl siding = Vinyl mounting block (clamps to siding) + screws into sheathing/stud behind. Stucco = Stucco anchors (expanding) or screws into studs through sheathing.
❌ Mistake: Neglecting Wire Protection for Hardwired Installs
Why it’s bad: You hardwire the Blink to existing doorbell wires for continuous power. You tuck the wire nuts behind the mount. The mount sits slightly proud of the wall. The sharp edge of the mount base or the screw heads nicks the wire insulation. Months later, a short circuit kills the doorbell or trips the transformer. Or a thief pulls the doorbell, snapping the wires.
What to do instead: Use a mount designed for hardwiring with an internal wire channel or a rear wire entry hole. Use gel-filled wire connectors (waterproof). Leave a service loop of wire. Ensure the mount base has smooth edges or a grommet where wires pass. Secure the doorbell to the mount with a security screw so a tug doesn’t rip wires.
❌ Mistake: Forgetting the “Chime Compatibility” Requirement
Why it’s bad: You buy a hardwired mount kit expecting your existing mechanical chime (ding-dong) to work. It doesn’t. The Blink Doorbell (battery model) cannot power a mechanical chime directly from the battery. It needs the Blink Chime Module (or a compatible resistor/diode kit) installed at the chime to work with mechanical chimes. Without it, the chime buzzes, hums, or doesn’t ring. You think the mount/doorbell is broken.
What to do instead: If you want your existing mechanical chime to ring, you MUST buy the Blink Chime Module (sold separately, ~$15) and install it inside your chime box. If you have a digital chime (plays melodies), it usually works without the module but check Blink’s compatibility list. If you don’t care about the existing chime, use the Blink Mini Camera or Alexa device as your indoor chime via Wi-Fi. Do not buy a “hardwired mount” thinking it solves the chime issue alone.
Budget Guidelines: How Much Should You Spend?
Understanding the price tiers helps you avoid overpaying for marketing fluff or underbuying and regretting it. The mount is a small cost relative to the doorbell, but it protects your investment.
Entry-Level ($8 – $15): Basic Functionality Only
What you get: A simple flat plastic mount (usually ABS or basic polypropylene). Includes the mount body and a small bag of generic screws/anchors (often mixed wood/masonry). Usually black or white. No wedge. No security features. Minimal weather sealing. Instructions are a folded slip of paper.
Best for: Mounting to a wood door frame in a protected area (deep covered porch), mild climate (no extreme heat/cold/UV), low theft risk, renters who have permission to drill wood, temporary installs. If your install is “textbook perfect” (flat wood frame, 48″ height, shallow recess), this works fine.
Watch out for: Brittle plastic in sun. Stripped screw heads. Rusty screws staining siding. No angle adjustment. No template.
Mid-Range ($18 – $35): The Sweet Spot for Most Homeowners
What you get: UV-stabilized polycarbonate or glass-filled nylon body. Stainless steel hardware (Torx or Hex heads). Includes a proper drilling template. Includes correct anchors for the stated surface (masonry kit has masonry bits and anchors; vinyl kit has the J-block). Often includes a wedge (15° or 25° down) or offers it as a low-cost add-on. Security screw for camera-to-mount (usually hex key). Good instructions, often with video link. 1-3 year warranty. Responsive brand support.
Best for: 90% of installs. Brick, stucco, wood, vinyl (with correct kit). Standard recesses. Moderate climates. Homeowners wanting a “do it once, do it right” solution. Balances cost, durability, and features perfectly.
Brands to look for: Wasserstein, Suptig, MountGenie, Dotty, Blink Official Accessories.
Premium ($40 – $65): Maximum Adjustability, Security, and Integration
What you get: Aluminum alloy (CNC machined or die-cast) or high-end glass-filled nylon. Full adjustability: ball joint (pan/tilt) or multi-wedge system (stackable wedges for 5°-45°). Integrated bubble level. Anti-theft cage or locking mechanism (security Torx, recessed set screw). Hardwired versions include wire management channel, gel connectors, chime module bracket. Lifetime warranty (often). Paintable finishes. Premium packaging.
Best for: Difficult angles (recessed + side approach). High theft areas. Coastal/harsh climates (316 SS hardware). Hardwired installs wanting clean wire management. Perfectionists who want to dial in the view to the degree. Homes with difficult surfaces (stone veneer, thick trim).
Brands to look for: Wasserstein (Premium line), RSTech, custom metal fabricators on Etsy (verify materials), Blink Official Hardwired Kit.
Luxury / Specialty ($70+): Niche Solutions
What you get: Recessed flush-mount kits (requires cutting wall/frame). Architectural matching finishes (oil-rubbed bronze, brushed brass, matte black powder coat). Integrated solar panel mounts (for battery extend). Heavy-duty security cages (steel). Custom 3D printed solutions for unique architecture. Professional installer grade.
Best for: High-end renovations where aesthetics are paramount. Unique mounting challenges (stone columns, glass doors, iron gates). Maximum security requirements. Off-grid/solar assist needs. Usually overkill for standard residential installs.
Expert Tips for Getting the Best Deal
- Buy the Mount With the Doorbell: Amazon and retailers often bundle the Blink Doorbell with a mount kit (wedge, corner, or siding) for $5-$10 less than buying separately. Check “Frequently Bought Together” or “Bundle Deals” on the product page.
- Watch for Lightning Deals / Prime Day / Black Friday: Third-party mount brands (Wasserstein, Suptig) frequently discount 20-35% during major sales events. The doorbell discounts get the headlines, but accessory discounts are deeper percentage-wise.
- Check “Open Box” / Amazon Warehouse: Mounts are often returned because the buyer bought the wrong type (flat vs wedge) or the color didn’t match. The mount itself is usually perfect. You can save 30-50%. Inspect photos for missing hardware.
- Consolidate Hardware Purchases: If you are mounting 2-3 Blink cameras (doorbell + outdoor cams), buy a brand’s “Multi-Cam Mount Kit” or buy their mounts together. Brands often offer 10-15% off multi-packs automatically at checkout or via a coupon code on their storefront.
- Use the “Subscribe & Save” Trick (If Applicable): Some brands list mounts on Subscribe & Save. Subscribe, get 5-15% off, receive the mount, then immediately cancel the subscription. You keep the discount. (Check terms, some exclude non-consumables).
- Don’t Pay for “Blink Branded” Unless You Need Warranty Unity: Blink’s own mounts are fine but often pricier than Wasserstein/Suptig equivalents with fewer features (e.g., Blink wedge is fixed 25°; third-party offers adjustable). The Blink warranty covers the doorbell regardless of mount used (unless the mount causes the damage). Third-party mounts have their own warranties.
- Read the 2- and 3-Star Reviews for Durability Truth: 5-star reviews are written on install day. 2-3 star reviews written 6-12 months later tell you about UV fading, cracked plastic, rust stains, screw stripping, and warping. Filter by “Most Recent” and “Verified Purchase.”
- Measure Twice, Drill Once (Use the Template!): Sounds obvious. But the number one reason for returns on mounts is “holes don’t line up.” Tape the paper template to the wall. Use a level. Mark with a nail or awl. Drill pilot holes. Test fit the mount before driving final screws. If it’s crooked, adjust the template.
- Seal the Perimeter: Once the mount is screwed down, run a small bead of paintable exterior silicone caulk (clear or color-matched) around the top and sides of the mount base where it meets the wall. Do not caulk the bottom (drainage). This prevents water intrusion behind the mount, which causes rot, mold, and anchor failure. It takes 30 seconds and saves thousands in repairs.
Frequently Asked Questions
Q: Will a Blink Doorbell mount work on vinyl siding without a mounting block?
A: Technically, you can screw through vinyl siding into the sheathing/studs behind using long screws and large washers, but it is strongly discouraged. Vinyl siding expands and contracts significantly with temperature. Screwing through it rigidly restricts this movement, leading to buckling, cracking, or popping of the siding panels. It also penetrates the weather-resistant barrier (house wrap), creating a leak risk. The correct way is a Vinyl Siding Mount Block (J-Block/Utility Block). It clamps onto the siding profile (J-channel) without penetrating the siding face or the house wrap. It provides a flat, stable, code-compliant mounting surface. They cost $10-$15. Use one.
Q: What is the difference between the Blink Video Doorbell (2024 release) mount and the older Blink Video Doorbell mount?
A: The Blink Video Doorbell (wired + battery, released 2024) and the Blink Video Doorbell (battery only, 2021/2022) share the exact same mounting hole pattern and physical back plate dimensions. Any mount labeled “Compatible with Blink Video Doorbell” fits both. However, the 2024 model has a USB-C port on the bottom (vs Micro-USB on the old) and a slightly different battery latch. Ensure the mount you buy has clearance for the USB-C cable if you plan to hardwire/charge in situ, and that the latch cutout matches. Most current 2023-2024 production mounts are updated for both.
Q: Can I use a Ring or generic doorbell mount for my Blink?
A: Generally, no. Ring doorbells have a different mounting hole pattern (usually wider spacing) and a different back plate shape. Generic “universal” mounts often have multiple hole patterns, but the Blink pattern is unique (two holes, specific spacing). A Ring mount will not align. A truly universal mount might have the Blink pattern, but verify the specs explicitly list “Blink Video Doorbell” compatibility. Do not assume “Universal” includes Blink. It often means “Ring, Nest, Arlo, Eufy.”
Q: Do I need a wedge mount if my doorbell is at standard height (48 inches)?
A: Standard height (approx 48″ from ground to center of doorbell) is ideal for a flat mount only if your door is flush with the exterior wall (no recess) and you want a straight-out view. If your door is recessed (set back into the entryway) even 3-4 inches, a flat mount at 48″ will point the camera at the side wall of the recess. You need a downward wedge (usually 15° or 25°) to point the camera down at the porch/visitor. If your doorbell must be mounted higher than 54″ (e.g., only spot is above a mail slot or light fixture), you absolutely need a steeper wedge (25°-45°) to see faces and packages.
Q: How do I install a Blink Doorbell on a metal door frame (apartment/condo) without drilling?
A: You have three good no-drill options: 1) High-strength outdoor adhesive mount (3M VHB tape or specialized construction adhesive like Liquid Nails FuzeIt). Clean frame with alcohol, apply, press firmly 60s, wait 24h before hanging doorbell. Works on smooth, painted metal. 2) Clamp/Grip Mount: Uses tension screws to clamp onto the edge of the metal door frame (like a C-clamp). No holes. Very secure. Check frame thickness compatibility. 3) Command Strips Outdoor (Heavy Duty): Only for the lightest Blink models (original battery doorbell) in mild climates. Not recommended for hardwired or heavy mounts. Adhesive fails in extreme heat/cold cycles.
Q: My Blink Doorbell keeps falling off the mount. The plastic tabs broke. What do I do?
A: This is a known issue with the Blink doorbell’s own plastic mounting tabs (on the camera body) snapping, especially in cold weather when plastic is brittle, or if the mount is slightly warped putting stress on the tabs. Solution: Buy a third-party “Anti-Theft Cage” or “Security Mount” that
clamps the camera body around the edges or uses the screw hole on the bottom of the camera (for tripod/accessory) instead of relying solely on the fragile side tabs. Brands like Wasserstein and Suptig make “Wrap-Around” security mounts that hold the camera securely even if the Blink tabs are broken. This saves the camera.Q: Can I paint my Blink Doorbell mount to match my front door?
A: Yes, but prep is everything. For Plastic (Polycarbonate/Nylon/ABS): Clean with soap water, dry, wipe with rubbing alcohol, apply Plastic Primer (spray, e.g., Krylon Fusion Primer or Rust-Oleum Plastic Primer), then spray paint (exterior grade, satin/flat matches best), then clear coat (UV resistant). For Aluminum: Clean, sand lightly (220 grit), apply Self-Etching Primer (critical for adhesion), paint, clear coat. Do not paint the camera body itself (voids warranty, blocks sensors/IR). Mask the camera mounting interface carefully. Remove the mount from the wall to paint. Let cure 72 hours before reinstalling.
Q: What size drill bit do I need for the included masonry anchors?
A: It is almost always printed on the anchor sleeve or the instruction sheet. Common sizes: 3/16″ (for #8-10 screws, blue Tapcons), 1/4″ (for #12-14 screws, red Tapcons), 5/16″ or 3/8″ (for sleeve anchors). Never guess. Using a 1/4″ bit for a 3/16″ anchor = loose anchor = failure. Using a 3/16″ bit for a 1/4″ anchor = bit breaks or anchor won’t insert = frustration. If the kit doesn’t include the bit, buy the exact size listed. A $3 bit saves a $50 anchor kit and a headache.
Q: Does the Blink Doorbell work with my existing mechanical chime if I hardwire it?
A: Only if you install the Blink Chime Module (sold separately, ~$15) inside your existing chime box. The Blink Doorbell (battery model) does not output enough sustained current to drive a mechanical solenoid chime. The Chime Module acts as a switch/relay powered by your doorbell transformer, triggered by the Blink. Without it, the chime will buzz, hum, chatter, or not ring at all. Digital chimes (electronic melodies)
may work without the module, but Blink officially recommends the module for all hardwired installs for reliability. The module is small, cheap, and easy to install (2 wires). Just do it.Q: How do I know if my existing doorbell transformer is compatible for hardwiring?
A: Blink Doorbell (2024 wired model) requires 16-24V AC, 10VA minimum (20VA recommended for long wire runs or chime module). Most modern transformers (post-1990) are 16V 10VA or 16V 30VA. Check the label on the transformer (usually in a basement, crawlspace, garage, attic, or near electrical panel). It will say “16V 10VA” or “24V 20VA” etc. If it says “10V” or “8V” or “5VA” — it is insufficient. You need to upgrade the transformer (a $15-20 part, easy for a handyman/electrician). If you cannot find/access the transformer, assume it’s old/undersized and budget for a replacement or stick to battery-only operation.
Our Final Recommendations
Based on the analysis of materials, engineering, user feedback, installer feedback, and value proposition, here are our top picks for specific buyer profiles.
Best for Budget-Conscious Buyers: Wasserstein Adjustable Mount (Flat + 15° Wedge Combo Pack)
Why: This kit gives you both a flat mount and a 15° wedge for less than most single mounts. It is made of UV-stabilized polycarbonate, includes stainless steel Torx screws, a drill template, and the correct anchors for wood/brick/concrete. It covers 80% of install scenarios. If you don’t need the wedge, you have a spare. If you do, you saved $15 buying separately. The plastic is thick, the screw bosses are reinforced, and Wasserstein honors their warranty. It lacks the premium feel of aluminum, but functionally it is 95% there for half the price.
Best Overall Value: Suptig Universal Mount Kit with Masonry Anchors & Level
Why: This is the “buy once, cry once” mid-range king. The kit is comprehensive: Mount body (glass-filled nylon), 15° wedge, 45° wedge (stackable), corner mount adapter, masonry drill bit, masonry anchors, wood screws, stainless Torx screws, bubble level, paper template, wire nuts, gel connectors, and a security hex key. It handles wood, brick, stucco, vinyl (with separate block), and metal. The stackable wedges let you dial 15°, 45°, or 60° down angle. The build quality feels substantial. The included bit alone is worth $5. Support is responsive. It is the only kit you need for a standard hardwired or battery install on any surface.
Best Premium Option: Wasserstein Premium Aluminum Mount with Ball Joint & Anti-Theft
Why: Machined aluminum. Powder coated. Ball joint allows infinite pan/tilt adjustment (locks tight with one hex bolt). Integrated anti-theft: Camera locks to mount with recessed security Torx (tool included); Mount locks to wall with security screws (tool included). Wire channel for clean hardwiring. Lifetime warranty. It looks architectural, not plastic. It will outlast the house. If you have a difficult angle (recessed + side view), this is the only mount that solves it elegantly without stacking ugly wedges. Expensive, but you install it once, forget it, and the doorbell is secure.
Best for Beginners: Blink Official Mount Kit (Flat or Wedge)
Why: Sometimes peace of mind is worth the “Amazon Tax.” The Blink-branded mount guarantees 100% fit compatibility (zero tolerance issues). The instructions are in the Blink app. The warranty is unified with the doorbell (if the mount fails and damages the doorbell, Blink support handles it seamlessly—third parties often dispute this). The plastic is good quality (UV stabilized). The wedge is a fixed 25° (good for most recesses). It includes the correct anchors for the surface you select at purchase (Wood, Brick/Stucco, Vinyl). No research needed. Click, deliver, install. Perfect for non-handy users who want zero friction.
Best for Advanced Users / Renters / HOA: RSTech No-Drill Clamp Mount (Metal Frame) or Command/Adhesive Mount (Smooth Surfaces)
Why: Advanced users know their constraints. If you cannot drill, you need a structural solution, not a sticky hook. The RSTech Clamp Mount (for metal door frames 1/16″-1/4″ thick) uses mechanical leverage. It is rock solid. Zero damage. Removable in 30 seconds. For smooth surfaces (fiberglass door, glass, smooth metal, painted wood), a proper 3M VHB tape mount (like the Dotty Heavy Duty Adhesive Mount) with a wide surface area and a mechanical safety tether (cable tie to handle/grille) is the pro move. Clean surface with IPA, apply VHB, 24hr cure. It holds 10+ lbs. The doorbell is 0.2 lbs. It is not coming off. These solutions require confidence in prep and physics, not just hope.
Conclusion: Making the Right Choice
You started this guide looking for a piece of plastic to hold a camera. You are finishing it understanding that the mount is the foundation of your security system’s reliability. We have covered the critical hierarchy of needs: Surface Compatibility (non-negotiable), Viewing Angle (functional necessity), Build Material (longevity), Security (asset protection), Installation Hardware (success vs failure), Aesthetics (pride of ownership), Maintenance Access (long-term usability), and Warranty (peace of mind).
Do not let the $10-$40 price tag of the mount trick you into treating it as an afterthought. A $5 mount fails. A $25 mount succeeds for years. The difference is one trip to the hardware store, one re-drill, one fallen camera, one missed package thief video. You are smarter than that now. You know your surface. You know your angle. You know your climate. You know your security needs. You know your budget tier.
Match your specific situation to the recommendations above. Order the mount
with* the doorbell. When the box arrives, read the instructions, use the template, drill the pilot holes, caulk the top edge, and smile every time you open the Blink app and see a perfect, stable, level view of your porch. That is the feeling of a job done right. Welcome to smarter home security.