Get Your Blink Camera Looking Brand New Again with Our Easy Back Cover Replacement!

Have you ever dropped your Blink camera and found the back cover damaged? Don’t worry, it’s a common issue that can be easily fixed with a replacement back cover. In this guide, we’ll show you the step-by-step process of replacing the back cover of your Blink camera to bring it back to life. The Blink camera is one of the most popular security cameras on the market, due to its affordability and ease of use.

However, accidents happen, and sometimes, the back cover can become damaged, affecting the camera’s functionality. If you’re facing this problem, don’t fret because we’ve got you covered – quite literally! Replacing the back cover of your Blink camera may seem daunting, but it’s actually a straightforward process that you can do yourself. With a few tools and some patience, you can have your camera back up and running in no time.

In this post, we’ll break down each step of the process, including what tools you’ll need and where to find a replacement back cover. Whether you’re a seasoned DIYer or a beginner, this guide is for you. By the end of it, you’ll be able to confidently replace the back cover of your Blink camera and get back to protecting your home or business.

So, grab your tools and let’s get started!

Preparing for Replacement

If you’re looking to replace the back cover on your Blink camera, there are some steps you’ll want to take to ensure a smooth process. Firstly, make sure you have a replacement back cover that is compatible with your Blink camera model. Once you have your replacement cover, turn off your camera and remove it from its mounting location.

Next, gently pry open the existing back cover using a plastic opening tool or a small flathead screwdriver. Be careful not to damage any of the internal components as you do this. Once the cover is removed, carefully detach the camera lens and board from the old cover and attach to the new one.

Finally, snap the new back cover into place and re-mount your camera. With a little patience and attention to detail, replacing the back cover on your Blink camera can be a straightforward process.

Step 1: Purchase Replacement Cover

Congratulations on taking the first step towards replacing your cover! It’s important to properly prepare before beginning the replacement process. The first thing to do is to purchase a replacement cover. Your cover may have become damaged or worn out over time, and a new one will ensure that your furniture stays protected.

When purchasing a replacement cover, make sure to consider the size and shape of your furniture. You want to make sure that the cover fits snugly, so that it does not come off easily during use. Choosing a cover that is made of durable and weather-resistant materials will also help to ensure that it lasts for a long time.

With your replacement cover in hand, you’ll be ready to move on to the next steps of the replacement process!

blink camera back cover replacement

Step 2: Gather Necessary Tools

When preparing for a brake pad replacement, it’s crucial to have all the necessary tools on hand. First and foremost, you’ll need to purchase the new brake pads specific to your vehicle make and model. You’ll also need a few key tools to complete the job, including a socket wrench set, a C-clamp, and a brake caliper piston tool.

Before getting started, it’s important to ensure that your work area is well-lit, clean, and clutter-free. You may also want to invest in a good set of gloves to protect your hands from any grease or debris. By gathering all the necessary tools and preparing your work area, you can ensure a smooth and successful brake pad replacement.

Step 3: Turn Off Camera

Now that you have successfully removed the camera lens, it is time to turn off the camera. To do this, press and hold the power button until the camera turns off completely. Turning off the camera will ensure that no electrical current is running through the device during the replacement process, reducing the risk of damage or injury.

Once the camera is off, double-check that it is unplugged from any electrical outlet or USB connection. It’s important to be thorough and cautious during this step, as ignoring it could potentially cause harm. With the camera safely turned off, you can now move on to the next step in the replacement process.

Removing the Old Cover

When it comes to replacing the back cover on your blink camera, the first step is to remove the old one. This may seem intimidating, but it’s actually a simple process. Begin by unplugging the camera from its power source and removing it from its mount.

Next, use a small, flat screwdriver or prying tool to carefully pry off the old cover. Be gentle, as you don’t want to damage the camera or any of its internal components. Once the cover is removed, you can discard it or save it for future use.

With the old cover out of the way, you’re now ready to install the new one and get your blink camera back up and running.

Step 1: Remove Screws

When it comes to replacing an old cover, the first step is to remove the screws. This may seem like an easy task, but it can be tricky if you don’t have the right tool or approach. You’ll need a screwdriver that fits the screws on your cover to ensure you can loosen them without stripping the head or damaging the cover.

It’s important to be gentle and patient during this process to avoid cracking or breaking the cover. Once the screws are removed, carefully lift the old cover off and set it aside. Remember, this is just the beginning of the journey and there will be more steps ahead.

So, take your time, follow the instructions, and don’t rush. By doing so, you’ll ensure that the process goes smoothly and your new cover fits perfectly.

Step 2: Gently Detach Cover

If you are on the lookout for a tutorial on how to change the cover on your laptop, then you are in the right place. Removing the old cover is the second step in the process, and it’s essential to do it with care. Before you begin, make sure that you have all the required tools and workspace available.

First, locate the cover-removal tabs, usually present at the bottom of the laptop. Once located, slowly lift the tabs using a plastic spudger or a flathead screwdriver. Make sure not to use too much force and pry open the tabs gently.

Next, lift the cover using your fingers and hold it at an angle. If the cover is still stuck, you may need to repeat the process or take help from someone with experience. With a bit of care, you should be able to detach the cover without causing any damage to the laptop.

Remember to handle the cover with care as it can get scratched or damaged during removal. By keeping these tips in mind, you’ll be able to detach the old cover without any problem.

Step 3: Disconnect Power Cable

Removing the old cover of your electronic device is an essential step in the process of upgrading or repairing it. To remove the old cover, the first thing you need to do is disconnect the power cable. This step is crucial as it ensures your safety and prevents any electrical damage to your device.

So, before removing the cover, make sure that your device is turned off and unplugged. Once you have done that, look for the power cable and disconnect it from the device. This may involve removing screws or simply unplugging the cable, depending on the device.

Remember to be gentle and careful while doing so. Also, it’s a good idea to keep the power cable in a safe place, away from any other tools or parts, so you don’t accidentally damage it. Once you have successfully disconnected the power cable, proceed to the next step of removing the old cover.

By following these steps, you can safely and effectively remove the old cover of your device and move on to the next stage of your repair or upgrade.

Inserting the New Cover

Now that you have obtained the replacement back cover for your Blink camera, it’s time to install it. This process is quite simple and can be completed in just a few minutes. First, make sure that your camera is turned off and the batteries are removed.

Then, carefully snap the new cover onto the back of your Blink camera until it clicks into place. It’s important to take your time and not rush this step to avoid damaging the camera or the cover. Once the new back cover is securely in place, you can reinsert the batteries and turn the camera back on.

Voila! Your Blink camera is now looking as good as new with its new cover in place. Remember, a well-maintained camera is crucial for it to perform optimally, so keep an eye on it and make any necessary repairs or replacements as soon as possible.

Step 1: Reconnect Power Cable

Now that you have reconnected the power cable, you are ready to move on to inserting the new cover. This step is crucial to protecting your device from dust and other potential hazards. Before you get started, make sure the cover is the correct size and shape for your device.

Hold the cover over the device and ensure there are no gaps or improper alignment. Once you have confirmed compatibility, slide the cover into place. You should hear a satisfying click as it snaps into position.

Be sure to inspect the cover and double-check that it is securely in place. Congratulations, you have successfully completed the process of inserting a new cover to protect your device!

Step 2: Align Cover in Place

Now that you have removed the old cover, it’s time to install the new one. Before you start, make sure that the cover is aligned correctly. This step is crucial, as any misalignment can cause issues later on.

Begin by placing the new cover on top of the padding or foam, ensuring that it is centered. Then, adjust the cover until it matches the shape of the seat. It’s important to smooth out any wrinkles or bumps and make sure that the cover is taut.

Once you’re happy with the alignment, use the clips or hooks to attach the cover to the frame. Check again to make sure that the cover is properly aligned before proceeding to the next step. By completing this step correctly, you’ll have a new, snug-fitting seat cover that looks great and is ready for use.

Step 3: Secure Screws

Now that you’ve placed the new cover over your device, it’s time to secure it in place. Take the screws you removed earlier and start tightening them back into position. It’s important to remember not to over-tighten them as this can damage the device.

However, make sure they’re secure enough to keep the cover firmly in place. Tighten each screw in a diagonal pattern to ensure equal pressure across the cover. You don’t want the cover to be too tight in one spot and too loose in another.

Once all screws are secure, give the cover a gentle wiggle to make sure it doesn’t move. Congratulations, you’ve successfully replaced the cover on your device! Make sure to turn it on and check for any issues before putting it back in use.

Final Steps

If you need to replace the back cover of your Blink camera, there are just a few final steps to complete the process. Once you have carefully removed the old back cover and inserted the new one, make sure all the edges are properly aligned and snap the new cover firmly into place. Then, take a moment to double-check that all buttons and ports are accessible and functional.

Finally, reattach your Blink camera to its mount or position it where it needs to be before you can enjoy the full functionality of your newly replaced back cover. With just a bit of patience and attention to detail, you can easily replace the back cover on your Blink camera and ensure it’s back in perfect working order.

Step 1: Turn on Camera

So, you’re ready to capture an amazing moment on camera. Congratulations! The first step in this process is to turn on your camera. This may sound like an obvious step, but you’d be surprised how many people forget to do it in their excitement.

Whether you’re using a smartphone camera or a high-end DSLR, it’s crucial to make sure your camera is turned on and ready to shoot. This way, you won’t miss any spontaneous moments or have to scramble to turn on your device. Remember, turning on your camera is just the first step, but it’s an essential one.

So take a deep breath, power on your camera, and let the creativity flow!

Step 2: Verify Functionality

Now that you have completed the initial setup and configuration of your software, it is time to move on to the final steps in the process. The next step is to verify the functionality of your software to ensure that it is working correctly. This involves testing all of the features and functions of your software to make sure that they are functioning as expected.

This is an important step since it allows you to catch any bugs or errors that may have been missed during development. It also gives you the opportunity to make any necessary changes to improve the functionality of your software before releasing it to the public. By conducting thorough testing, you can ensure that your software is of the highest quality and that it meets the needs of your users.

So take the time to review your software and verify its functionality today.

Step 3: Dispose of Old Cover Responsibly

As you replace your old cover with a new one, it’s important to dispose of the old cover responsibly. Simply throwing it in the trash can harm the environment and contribute to pollution. Instead, consider donating the old cover to a local thrift store or charity that accepts donations.

If it’s too worn out or damaged to be donated, check with your local recycling center to see if they accept textiles for recycling. Some communities even offer textile recycling programs where you can drop off old fabrics for proper disposal. By disposing of your old cover in a responsible manner, you can do your part in reducing waste and protecting the environment.


In conclusion, replacing the back cover of your Blink camera is like giving it a new outfit. Not only does it refresh the device’s appearance, it also adds a layer of protection. Just like how changing up your wardrobe can give you a confidence boost and shield you from the elements, a new back cover can do the same for your trusty security camera.

So, for a stylish and defended Blink camera, consider a back cover replacement! Blink and you might miss out on this upgrade opportunity.


What should I do if my Blink camera’s back cover gets damaged?
You can easily replace the back cover of your Blink camera by purchasing a replacement cover. Simply remove the damaged cover and install the new one according to the manufacturer’s instructions.

Can I replace the back cover of my Blink camera myself?
Yes, you can replace the back cover of your Blink camera yourself. It is a simple process that requires no special tools or skills.

Where can I purchase a replacement back cover for my Blink camera?
You can purchase a replacement back cover for your Blink camera from various online retailers, such as Amazon or the Blink website.

How much does a replacement back cover for a Blink camera cost?
The cost of a replacement back cover for a Blink camera varies depending on the model of the camera and the retailer selling the cover. Typically, replacement covers range in price from $10 to $20.