Blink Chime for Doorbell

The blink chime for doorbell adds a wireless indoor sounder to your Blink video doorbell, so you never miss a visitor. It connects over Wi‑Fi, offers customizable tones, and installs in minutes without wiring.

When someone presses your video doorbell, you want to hear it inside the house. The blink chime for doorbell solves that problem with a simple plug‑and‑play device. It connects to your existing Blink system over Wi‑Fi and plays a sound you choose. No wiring, no professional install, just a quick setup in the app.

In this guide we cover everything you need to know. You will learn what the device does, how it works, the main features, step‑by‑step installation, common troubleshooting, and how it stacks up against other smart chimes. By the end you will feel confident buying and using a blink chime for doorbell in your own home.

Key Takeaways

• Wireless convenience: The blink chime for doorbell works without any hard‑wired connection.
• Custom alerts: Choose from multiple chime tones and volume levels to suit your home.
• Easy pairing: Syncs with the Blink app in a few taps.
• Battery powered: Runs on standard AA batteries for up to two years.
• Wide compatibility: Works with all Blink video doorbell models.
• Smart home ready: Integrates with Alexa for voice announcements.

What Is a Blink Chime for Doorbell?

A wireless indoor sounder

The blink chime for doorbell is a small speaker that plugs into a standard outlet. It receives a signal from your Blink video doorbell whenever someone rings the bell or triggers motion detection. The chime then plays a tone you have selected. Because it uses Wi‑Fi, you can place it anywhere you have power.

Designed for Blink ecosystems

Blink built this chime to work only with Blink doorbells. It does not work with Ring, Nest, or other brands. That focus means the pairing process is smooth and the firmware updates come from the same app you already use for your cameras.

Battery backup option

Some models include a battery compartment. If the power goes out, the chime still rings. This is handy for homes with frequent outages or for renters who cannot modify wiring.

How the Blink Chime Works with Your Doorbell

Wi‑Fi communication

When a visitor presses the doorbell button, the doorbell sends a notification to the Blink cloud. The cloud forwards that event to any linked chime devices. The blink chime for doorbell receives the packet and plays the sound locally. The whole chain takes less than a second.

App‑controlled settings

All tone choices, volume levels, and schedules live in the Blink app. You can set a gentle chime for daytime and a louder alert for night. You can also mute the chime during specific hours, like when a baby naps.

Multiple chimes, one doorbell

You can pair several blink chime for doorbell units to a single doorbell. Place one in the kitchen, another upstairs, and a third in the garage. Each will ring simultaneously, so you never miss a visitor no matter where you are.

Key Features and Benefits

Customizable tones

The device ships with eight built‑in melodies. You can preview each in the app before selecting. If you want a classic ding‑dong, a soft chime, or a festive jingle, the option is there.

Adjustable volume

Volume slides from barely audible to loud enough for a busy hallway. The app shows a visual meter so you can set the exact level you need.

Battery life up to two years

Using two AA alkaline batteries, the blink chime for doorbell can run for 24 months under normal use. The app notifies you when battery levels drop below 20 %.

Alexa integration

Enable the Blink skill in the Alexa app. Then ask, “Alexa, announce someone at the front door.” The chime will play the selected tone and Alexa can also speak a custom phrase.

Compact design

The unit measures roughly 3 inches square and 1 inch deep. It blends into any outlet without blocking the second socket.

Firmware updates over the air

Blink pushes security patches and new tones automatically. You never have to manually update the device.

Installation and Setup Guide

Unbox and inspect

Open the box. You should see the chime unit, two AA batteries (if not pre‑installed), a quick‑start card, and a warranty sheet. Check for any physical damage.

Insert batteries

Slide the battery cover off. Place the batteries following the polarity markings. Replace the cover. The LED on the front will blink amber, indicating it is ready to pair.

Plug into power

Insert the chime into a standard 120 V outlet. The LED turns solid green once it connects to Wi‑Fi.

Open the Blink app

Tap the “+” icon, choose “Add Device,” then select “Chime.” The app will scan for nearby devices. When it finds the blink chime for doorbell, tap “Connect.”

Select your Wi‑Fi network

Enter your 2.4 GHz network password. The chime does not support 5 GHz. Wait for the confirmation screen.

Link to your doorbell

In the device list, tap the chime, then choose “Link Doorbell.” Pick the Blink video doorbell you want to associate. Save the setting.

Choose tone and volume

Go to “Chime Settings.” Preview each melody. Pick your favorite and set the volume slider. Enable “Do Not Disturb” hours if desired.

Test the system

Press the doorbell button or trigger a motion event. The chime should sound immediately. If not, see the troubleshooting section below.

Troubleshooting Common Issues

Chime does not ring

First, verify the LED is solid green. If it is amber, the chime lost Wi‑Fi. Re‑run the Wi‑Fi setup in the app. Next, confirm the doorbell is online in the app. A disconnected doorbell cannot send events.

Weak Wi‑Fi signal

Move the chime closer to the router or add a Wi‑Fi extender. The device only uses 2.4 GHz, which penetrates walls better than 5 GHz but still needs decent strength.

Battery drain too fast

Check that you are using fresh alkaline batteries. Rechargeable NiMH cells have lower voltage and may cause early low‑battery alerts. Also, reduce the volume; higher output draws more current.

Tone not changing

After selecting a new tone, wait a few seconds for the cloud to push the update. Force‑close the app and reopen if the change does not appear.

Multiple chimes out of sync

Ensure each chime is linked to the same doorbell in the app. If one chime is linked to a different doorbell, it will not ring for the first doorbell’s events.

Alexa not announcing

Confirm the Blink skill is enabled and the correct account is linked. In the Alexa app, go to Devices → Blink → Chime → Announcements and toggle “On.”

Comparing Blink Chime to Other Smart Chimes

Blink vs. Ring Chime

Ring Chime works only with Ring doorbells. It offers similar tone choices but requires a Ring Protect plan for some advanced features. The blink chime for doorbell has no subscription fee.

Blink vs. Google Nest Doorbell Chime

Nest’s chime integrates tightly with Google Assistant. However, it needs a wired transformer for power. Blink’s battery option gives more placement freedom.

Blink vs. Generic Wi‑Fi Plug‑In Chimes

Third‑party chimes often lack firmware updates and may not support motion‑triggered alerts. Blink’s first‑party device guarantees compatibility and ongoing support.

Price comparison

At the time of writing, the blink chime for doorbell retails around $35. Ring Chime is about $30 but needs a subscription for video history. Nest Chime costs $50 plus wiring labor.

Ease of use

Blink’s app‑only setup takes under five minutes. Competitors sometimes require a separate hub or a web portal. For non‑technical users, Blink wins on simplicity.

Final Thoughts and Recommendations

The blink chime for doorbell fills a simple but critical gap: hearing your doorbell inside the house. Its wireless design, long battery life, and deep integration with the Blink ecosystem make it a strong choice for existing Blink owners. If you already use Blink cameras, adding this chime keeps everything in one app.

For renters, the battery‑only model means no landlord approval. For larger homes, buy two or three units to cover every floor. Pair with Alexa for voice announcements and you have a complete, low‑maintenance notification system.

Before purchasing, verify your Wi‑Fi reaches the intended outlet. A quick signal test with a phone can save a return. Once installed, explore the tone library and set a schedule that matches your household rhythm. You’ll wonder how you ever lived without it.

Frequently Asked Questions

Does the blink chime for doorbell work without a Blink video doorbell?

No. The chime is designed to pair exclusively with Blink video doorbells. It will not receive signals from other brands.

Can I use the blink chime for doorbell outdoors?

The device is rated for indoor use only. Exposure to rain or extreme temperatures can damage the electronics.

How many chimes can I connect to one doorbell?

You can link up to ten blink chime for doorbell units to a single Blink video doorbell through the app.

What type of batteries does the chime require?

It uses two standard AA alkaline batteries. Rechargeable batteries are not recommended because they may cause early low‑battery warnings.

Is a subscription required for the chime to function?

No subscription is needed. All features, including tone selection and Alexa integration, work free of charge.

Can I adjust the chime volume from the doorbell itself?

Volume and tone settings are managed only in the Blink app. The doorbell hardware does not have physical controls for the chime.