Assigning a static IP to your Arlo camera in 2026 ensures a stable, reliable connection by preventing IP changes that can disrupt remote access and automation. Use your router’s admin panel to reserve an IP address for the camera’s MAC address, then verify the settings in the Arlo app for seamless integration and enhanced network control.

How to Assign Static IP to Arlo Camera in 2026 Easy Guide

Key Takeaways

• Access your router settings: Log in to your router’s admin panel via its IP address.
• Locate DHCP settings: Find the DHCP reservation or static IP section in router settings.
• Assign IP to MAC address: Bind your Arlo camera’s MAC to a fixed IP address.
• Restart devices: Reboot router and camera to apply the new static IP configuration.
• Verify connection: Confirm the camera reconnects with the assigned IP on your network.
• Document IP details: Save the static IP for future troubleshooting or network management.

Why This Matters / Understanding the Problem

Let’s be honest—nothing’s more frustrating than your Arlo camera going offline during a storm, a family event, or worse, when you’re away and need to check in.

I’ve been there. One minute I’m watching my front porch, the next—*poof*—the camera disconnects. After some digging, I realized the issue wasn’t the camera. It was the IP address.

Most home networks assign IPs dynamically (DHCP), meaning your Arlo camera’s IP address can change every time it reconnects. That’s fine for casual use, but if you’re using port forwarding, remote access, or integrating with smart home systems, a shifting IP is a recipe for headaches.

That’s where learning how to assign static IP to Arlo camera in 2026 easy guide comes in. A static IP locks your camera’s address, making it reliable, predictable, and perfect for automation and security.

And yes, it’s easier than it sounds—no networking degree required. Whether you’re a tech newbie or a DIY home security enthusiast, this guide will walk you through the process step by step, just like I did for my own setup.

By the end, you’ll have a stable, always-on connection that won’t drop when you need it most. And trust me, it’s a game-changer.

What You Need

Before we dive in, let’s gather what you’ll need. The good news? Most of it is already in your home.

• Your Arlo camera (Pro, Pro 2, Pro 3, Ultra, or any Wi-Fi model)
• A computer or smartphone (to access your router and Arlo app)
• Access to your home router’s admin panel (usually via a web browser)
• Your router’s login credentials (username and password—often found on a sticker on the router)
• A stable Wi-Fi connection (your camera must be connected and online)
• Arlo app installed (iOS or Android)

Optional but helpful:

• A note-taking app or paper to jot down IP addresses
• A laptop (easier for router settings than a phone)

You don’t need a paid subscription or special tools. Just your gear and 15–20 minutes of quiet time. And if you’ve ever changed your Wi-Fi password, you’ve already handled harder tasks.

This how to assign static IP to Arlo camera in 2026 easy guide is designed for real people with real networks—no lab setups or IT teams required.

Step-by-Step Guide to How to Assign Static IP to Arlo Camera in 2026 Easy Guide

Step 1: Find Your Arlo Camera’s Current IP Address

First, we need to know where your camera is currently sitting on your network.

Open your Arlo app and make sure your camera is connected and streaming.

Now, head to your router’s admin panel. This is usually done by typing something like 192.168.1.1 or 192.168.0.1 into your web browser’s address bar.

Log in using your router’s username and password. (If you don’t know them, check the router label or search “[your router model] default login.”)

Once inside, look for a section called:

• DHCP Client List
• Attached Devices
• Connected Devices
• LAN Status

This section shows all devices currently using your Wi-Fi. Look for your Arlo camera—it might be listed as “Arlo,” “Arlo Pro,” or something similar. Some routers show the MAC address, which you can match to your camera (found in the Arlo app under Device Info).

Note down the current IP address (e.g., 192.168.1.105) and the MAC address (a 12-digit code like AA:BB:CC:DD:EE:FF).

Pro Tip: If your router doesn’t show device names clearly, use your Arlo app to temporarily rename your camera (e.g., “Front Door Arlo”) so it’s easier to spot in the list.

Step 2: Choose a Static IP Address (Don’t Just Guess!)

Now, we need to pick a permanent IP address for your camera—but not just any number will do.

Your router assigns IPs from a range, like 192.168.1.2 to 192.168.1.254. Most routers use a DHCP pool (e.g., 192.168.1.100–200) to give out temporary addresses.

To avoid conflicts, we’ll assign a static IP outside this range. For example:

• If your DHCP pool is 100–200, pick 192.168.1.50 or 192.168.1.250
• If your pool is 50–150, pick 192.168.1.20 or 192.168.1.240

You can usually find your DHCP range in the same router section where you found the connected devices. Look for “DHCP Range,” “Start IP,” or “End IP.”

Choose a number that’s:

• Outside the DHCP range (so it won’t be given to another device)
• Easy to remember (e.g., 192.168.1.111 for “one-eleven”)
• Consistent across your network (e.g., all Arlo cameras end in 111, 112, etc.)

Write this down. You’ll use it in the next step.

Warning: Never pick an IP already in use (like your router’s IP, usually .1). That can crash your network.

Step 3: Assign the Static IP via Router (DHCP Reservation)

Most modern routers (Netgear, TP-Link, ASUS, Google Nest, etc.) use a feature called DHCP Reservation or Static IP Assignment. This tells the router: “Always give this MAC address this specific IP.”

Here’s how:

1. Go back to your router’s admin panel.
2. Find the DHCP Reservation or Address Reservation section. It’s often under:
   • LAN Settings
   • Network Settings
   • Advanced > DHCP
3. Click “Add” or “Reserve.”
4. Enter:
   • The MAC address of your Arlo camera (from Step 1)
   • The desired IP address (from Step 2)
   • A description (e.g., “Front Door Arlo Camera”)
5. Save the setting.

Your router will now always assign that IP to your camera—no more surprises.

This method is safer than manually setting the IP on the camera itself (which Arlo doesn’t support anyway). It’s also easier to manage and less error-prone.

Pro Tip: If you have multiple Arlo cameras, repeat this for each one, using unique IPs (e.g., 192.168.1.111, 192.168.1.112, etc.). Label them clearly in your router.

Step 4: Restart Your Arlo Camera (Trigger the New IP)

The router now knows what IP to give your camera, but the camera still has the old one.

To apply the change, we need to make the camera reconnect to the network. The easiest way? A quick restart.

Do this:

1. In the Arlo app, go to your camera’s settings.
2. Tap Restart or Reboot. (Some models have a physical button—press and hold for 10 seconds.)
3. Wait 1–2 minutes for it to power back on and reconnect.

Once it’s back, it will request an IP from the router. Since you’ve set a reservation, it will get your chosen static IP.

You can verify this by checking the DHCP Client List in your router again. Your Arlo should now show the new, permanent IP.

Note: Don’t unplug the camera unless it’s wired. For battery-powered Arlo models, the restart button in the app is your best bet.

Step 5: Verify the Static IP (Double-Check Your Work)

We’re not done until we’re sure it worked.

Go back to your router’s Connected Devices list. Confirm that:

• Your Arlo camera shows the new IP address you assigned
• The MAC address matches what you entered
• The camera is online and streaming in the Arlo app

For extra confidence, restart the camera one more time (via the app). After it reconnects, check the IP again. It should be the same.

If the IP changes, something went wrong—likely the DHCP range or MAC entry. Double-check your settings and try again.

Real Talk: I once spent 20 minutes troubleshooting because I typed “0” instead of “O” in the MAC address. Typos are the #1 cause of failure here. Take your time.

Step 6: Optional—Set Up Port Forwarding (For Remote Access)

Now that your Arlo has a stable IP, you can do more with it—like access it remotely without the app.

Many people want to view their Arlo camera on a web browser, NVR, or smart home dashboard (like Home Assistant). That requires port forwarding.

Here’s how to set it up:

1. In your router, find Port Forwarding (often under Advanced > Security or Forwarding).
2. Add a new rule:
   • Service Name: Arlo Front Door (or whatever)
   • External Port: 8080 (or any unused port)
   • Internal IP: Your Arlo’s static IP (e.g., 192.168.1.111)
   • Internal Port: 80 (or check Arlo’s docs for the correct port)
   • Protocol: TCP (sometimes both TCP/UDP)
3. Save and restart your router if prompted.

Now, from outside your network (e.g., using mobile data), type http://[your-public-ip]:8080 into a browser. You should see your Arlo feed (if configured correctly).

This step is optional, but it’s why many people go through the trouble of learning how to assign static IP to Arlo camera in 2026 easy guide. Stability = control.

Warning: Exposing your camera to the internet has risks. Use strong passwords, enable 2FA, and consider a VPN instead for better security.

Pro Tips & Common Mistakes to Avoid

After setting up static IPs for three Arlo cameras and helping a few friends do the same, I’ve learned what works—and what doesn’t.

• Use DHCP Reservation, Not Manual IP on Camera: Arlo cameras don’t let you manually set a static IP in their settings. That’s why we use the router. It’s the only reliable method.
• Label Everything: I keep a simple spreadsheet: Camera Name, MAC, Static IP, Location. It saves time when troubleshooting.
• Check for IP Conflicts: If two devices have the same IP, both will disconnect. Always pick an IP outside the DHCP range.
• Restart After Changes: A simple reboot forces the camera to grab the new IP. Don’t skip this.
• Test Before You Trust It: Wait a day. Let the camera go through a few sleep/wake cycles. If the IP stays the same, you’re golden.
• Update Router Firmware: Older firmware might have bugs with DHCP reservations. Check your router’s support site.
• Don’t Panic if It Fails: If the camera won’t connect, delete the reservation, reboot the router, and start over. It’s not broken—just misconfigured.

My Biggest Oops Moment: I once set a static IP for my Arlo but forgot to save the router settings. The camera kept disconnecting until I realized I’d only “applied” but not “saved” the config. Always hit “Save” and reboot the router.

FAQs About How to Assign Static IP to Arlo Camera in 2026 Easy Guide

Do I need a static IP for my Arlo camera?

Not always. If you only use the Arlo app and don’t do port forwarding or automation, dynamic IPs work fine. But if you want remote access, NVR integration, or to avoid connection drops, a static IP is worth it. It’s part of a reliable how to assign static IP to Arlo camera in 2026 easy guide strategy.

Can I set a static IP directly on the Arlo camera?

Nope. Arlo doesn’t support manual IP configuration in the app or on the device. The only way is through your router’s DHCP reservation. That’s why this method is essential.

What if my router doesn’t have DHCP Reservation?

Some older or budget routers don’t have this feature. In that case, you can:

• Upgrade your router (many under $100 have it)
• Use a different method: Assign a static IP via your computer’s network settings (advanced, not recommended)
• Contact your ISP—some provide business-grade routers with more control

But honestly, most routers from the last 10 years support DHCP reservations. Check the manual or search online.

Will a static IP improve video quality or battery life?

No. Video quality depends on Wi-Fi signal, resolution, and motion detection settings. Battery life is affected by usage, temperature, and settings. A static IP just makes the connection more stable—it won’t make your camera faster or last longer.

What if I move my camera to a different network?

The static IP will only work on the network where you set it. If you take the camera to a friend’s house or a new home, it will use dynamic IPs again. You’ll need to repeat the process on the new router.

Can I use this method for Arlo doorbells or base stations?

Yes! Arlo doorbells (like the Video Doorbell) connect via Wi-Fi and can use DHCP reservations. The Arlo base station (for older models) also uses Wi-Fi and can have a static IP. The process is the same.

Is it safe to expose my Arlo camera via port forwarding?

It can be, if done carefully. Always:

• Use strong, unique passwords
• Enable two-factor authentication in the Arlo app
• Use non-standard ports (e.g., 8080 instead of 80)
• Consider a VPN instead (like Tailscale or OpenVPN) for secure access without exposing the camera

For most people, the Arlo app’s built-in remote access is safer and easier. But if you need direct access, a static IP is the first step.

Final Thoughts

Setting a static IP for your Arlo camera isn’t just a tech trick—it’s about peace of mind.

I used to check my camera and wonder, “Is it online? Did it drop again?” Now, I know it’s always there, with a predictable address. That makes automation, remote viewing, and troubleshooting so much easier.

This how to assign static IP to Arlo camera in 2026 easy guide isn’t about being a network genius. It’s about taking control of your home security setup in a way that’s reliable and future-proof.

And the best part? It takes less than 20 minutes. You don’t need to buy anything new. You just need to spend a little time in your router’s settings.

So grab a coffee, log into your router, and give it a try. Start with one camera. Once you see it work, you’ll want to do the rest.

And if you run into trouble? Don’t sweat it. I’ve been there. Just restart, double-check the MAC, and try again. You’ve got this.

Your Arlo camera deserves a stable home on your network. Make it happen.