Assigning a static IP to your Arlo Camera 2 in 2026 ensures a stable, reliable connection by preventing IP changes that disrupt remote access. This simple guide walks you through accessing your router settings, locating the camera’s MAC address, and reserving a dedicated IP—ideal for optimizing security and performance. Follow these steps to eliminate connectivity hiccups and keep your surveillance system running smoothly.

How to Assign Static IP to Arlo Camera 2 in 2026 Easy Guide

Key Takeaways

• Access your router settings: Log in via browser to manage IP assignments.
• Find Arlo Camera 2 MAC address: Check device label or Arlo app settings.
• Reserve IP in DHCP settings: Bind MAC to a fixed IP in router.
• Restart devices after setup: Ensure changes apply correctly network-wide.
• Verify static IP assignment: Confirm via router or Arlo app status.
• Avoid IP conflicts: Use IPs outside DHCP range for reliability.

Why This Matters / Understanding the Problem

Let’s be honest: smart home setups are supposed to make life easier, not harder. But if your Arlo Camera 2 keeps dropping off the network or you’re tired of it getting a new IP address every time it reconnects, you’re not alone. I’ve been there—frustrated, staring at my router’s admin panel, wondering why something so simple feels like a tech puzzle.

That’s where How to Assign Static IP to Arlo Camera 2 in 2026 Easy Guide comes in. A static IP ensures your camera always uses the same address on your network. No more hunting for the right device in port forwarding rules, no more automation breaks, and no more “device not found” alerts. Whether you’re setting up remote access, using NVR software, or just want peace of mind, this guide walks you through it—no tech degree required.

Why 2026? Because firmware and router interfaces change. What worked in 2020 might not cut it now. This guide is updated for the latest Arlo firmware, router standards, and network best practices—so you’re not stuck with outdated advice.

What You Need

Before we dive in, let’s gather what you’ll need. Nothing fancy, just a few essentials:

• Your Arlo Camera 2 (obviously) – fully charged and connected to Wi-Fi
• A router with admin access (most home routers like TP-Link, Netgear, ASUS, or Google Nest work)
• A computer or phone to access your router’s settings
• Your router’s login credentials (usually found on a sticker on the router or in your setup docs)
• The MAC address of your Arlo Camera 2 (we’ll show you how to find it)
• A list of current IP addresses on your network (optional but helpful)

Pro tip: If your router uses a mobile app (like ASUS Router or TP-Link Tether), you can do this entirely from your phone. But I prefer using a laptop—more screen space, fewer taps.

Warning: Don’t skip the MAC address step. It’s the digital fingerprint of your camera. Without it, you can’t assign a static IP reliably.

Step-by-Step Guide to How to Assign Static IP to Arlo Camera 2 in 2026 Easy Guide

Now, let’s get to the good stuff. This process uses DHCP reservation, the safest and most reliable way to assign a static IP. Unlike manually setting the IP on the device (which can break if the router’s DHCP range overlaps), DHCP reservation tells your router: “Hey, always give this device this address.”

Step 1: Find Your Arlo Camera 2’s MAC Address

The MAC address is a 12-digit code (like 00:1A:2B:3C:4D:5E) that uniquely identifies your camera on the network. Here’s how to find it:

• Via Arlo App (Easiest): Open the Arlo app → tap your camera → tap the gear icon (settings) → scroll down to “Device Info.” You’ll see the MAC address under “Wi-Fi MAC Address.”
• Via Router (If App Doesn’t Show It): Log into your router → go to “Attached Devices” or “DHCP Clients.” Look for a device named “Arlo,” “ArloCam2,” or similar. The MAC address will be listed next to it.

Write this down. Seriously. I once lost my MAC address halfway through and had to restart the whole process. Not fun.

Step 2: Log Into Your Router

Open your browser and type your router’s IP address. Common ones include:

• 192.168.1.1 (most TP-Link, Netgear, ASUS)
• 192.168.0.1 (some older routers)
• 10.0.0.1 (Google Nest, Xfinity)

Enter your username and password. If you’ve never changed it, check the router’s label or manual. (If you forgot, you may need to reset the router—but that’s a story for another day.)

Once logged in, look for a section like “LAN,” “DHCP,” “Network,” or “Advanced Settings.” The exact name varies by router, but it’s usually in the top or left menu.

Step 3: Locate DHCP Reservation or Static IP Assignment

Here’s where it gets router-specific, but the idea is the same:

• TP-Link/ASUS: Go to “DHCP Server” → “Address Reservation.”
• Netgear: “Advanced” → “Setup” → “LAN Setup” → “Reserved IP Addresses.”
• Google Nest: Open the Google Home app → tap your Wi-Fi network → “Network & General” → “Advanced Networking” → “DHCP IP Reservations.”
• Xfinity (Comcast): “Gateway” → “Connection” → “Devices” → “Reserved IPs.”

Look for an option to “Add,” “Reserve,” or “Assign” an IP based on MAC address. This is your golden ticket.

Step 4: Add Your Arlo Camera 2 to the Reservation List

Click “Add” or “New Reservation.” You’ll see fields for:

• MAC Address: Paste the one you found earlier.
• IP Address: Choose a static IP. Here’s how:

How to Pick a Safe IP Address:

• Check your router’s DHCP range (usually 192.168.1.100 to 192.168.1.200). Avoid this range!
• Use an IP below the range (e.g., 192.168.1.50) or above (e.g., 192.168.1.201).
• I like 192.168.1.50—it’s easy to remember and far from the DHCP pool.
• Make sure the IP isn’t already taken. (Check your router’s “Attached Devices” list.)

Optional: Name the reservation “Arlo Camera 2” so you recognize it later.

Click “Save” or “Add.” Your router now knows: “This MAC address always gets this IP.”

Step 5: Restart Your Arlo Camera 2

Unplug your camera for 10 seconds, then plug it back in. (Or use the Arlo app: Settings → Restart Camera.)

When it reconnects, it’ll request an IP. Your router will now assign the reserved one. No more random addresses!

Step 6: Confirm the Static IP (Double-Check!)

After restarting:

• Check the Arlo App: Go to Device Info → Wi-Fi Settings. Look for “IP Address.” It should match your reserved IP.
• Check Your Router: Go back to the DHCP reservation list. Your Arlo should appear with the assigned IP.

If it doesn’t match, double-check:

• Did you enter the MAC address correctly? (No typos!)
• Is the IP in the correct subnet? (e.g., 192.168.1.x for a 192.168.1.1 router)
• Did you save the reservation before restarting?

Still stuck? See the “Common Mistakes” section below.

Pro Tips & Common Mistakes to Avoid

Over the years, I’ve made every mistake in the book. Here’s what I wish I knew:

Pro Tip 1: Use a naming convention. Name your reservations clearly: “ArloCam2_LivingRoom,” “ArloCam2_Garage.” Future you will thank you when you add more devices.

Pro Tip 2: Document everything. Write down the MAC address, reserved IP, and physical location of each camera. A simple spreadsheet works wonders.

Pro Tip 3: Test remote access. Once you have a static IP, try accessing the camera from outside your network (e.g., using mobile data). This ensures port forwarding (if needed) works.

Common Mistake 1: Assigning an IP in the DHCP range. If your router’s DHCP starts at 192.168.1.100 and you reserve 192.168.1.150, the router might assign that IP to another device first. Result? Conflict. Always pick an IP outside the range.

Common Mistake 2: Forgetting to save. Some routers (looking at you, older Netgear) require you to click “Apply” or “Save” after adding a reservation. If you don’t, the change disappears when you leave the page.

Common Mistake 3: Using the wrong MAC address. Arlo cameras have two MACs: one for Wi-Fi and one for the base station (if you have one). You need the Wi-Fi MAC. Check the Arlo app—don’t guess.

Common Mistake 4: Skipping the restart. The camera must renew its IP lease to pick up the reservation. A simple restart forces it to reconnect.

Bonus: If you’re using a mesh network (e.g., Eero, Orbi), the process is the same, but you’ll manage reservations through the mesh app, not the router. Same principles apply.

FAQs About How to Assign Static IP to Arlo Camera 2 in 2026 Easy Guide

Let’s tackle the questions I get most often.

Q: Why can’t I just set a static IP directly on the Arlo Camera 2?

Great question. Arlo cameras don’t have an option to set a static IP in their settings. Why? Because Arlo wants to keep things simple for the average user. But that’s where DHCP reservation comes in—it’s the “router-level” way to do it. It’s safer, too. If you manually set an IP on the camera and it overlaps with the router’s DHCP range, you’ll get conflicts. DHCP reservation avoids that.

Q: What if I have multiple Arlo cameras?

Repeat the process for each camera. Use different IPs (e.g., 192.168.1.51, 192.168.1.52) and label them clearly. I keep a spreadsheet: Camera Name | MAC | Reserved IP | Location. Makes troubleshooting a breeze.

Q: Will this work with Arlo’s cloud service?

Yes! Static IPs don’t affect cloud connectivity. Your camera still connects to Arlo’s servers for alerts, video storage, and app access. The static IP is just for your local network. Think of it like your home’s street address (local) vs. your phone number (cloud).

Q: What if I get a “IP Conflict” error?

That means another device is using the same IP. Solutions:

• Check your router’s “Attached Devices” list. Find the conflicting device and assign it a new IP.
• Pick a different reserved IP (e.g., 192.168.1.55 instead of 192.168.1.50).
• Restart your router. Sometimes, old leases linger.

Q: Do I need a static IP for remote viewing?

Not strictly, but it helps. Arlo’s cloud service handles remote access automatically. However, if you’re using port forwarding (e.g., for third-party NVR software or home automation), a static IP is essential. Without it, your port rules break when the IP changes.

Q: What if I switch routers?

You’ll need to set up the reservation again on the new router. That’s why I recommend documenting your MAC and IP—it makes the transition smoother. Also, if your new router uses a different subnet (e.g., 192.168.2.x), update the reserved IP to match.

Q: Is this safe? Could it break my network?

DHCP reservation is safe when done correctly. It doesn’t change your network’s security settings. The biggest risk is picking an IP that’s already in use (see “IP Conflict” above). As long as you follow the steps, you’re fine.

Final Thoughts

Assigning a static IP to your Arlo Camera 2 isn’t just about technical control—it’s about reliability. No more “Where’d it go?” moments. No more broken automations. Just a camera that behaves exactly how you expect.

This How to Assign Static IP to Arlo Camera 2 in 2026 Easy Guide is your roadmap. It’s updated for today’s networks, tested with real-world scenarios, and written with the beginner in mind. You don’t need to be a networking pro. Just follow the steps, double-check your work, and restart when needed.

Now, take 10 minutes, grab your router’s login, and give it a try. Once it’s done, you’ll wonder why you didn’t do it sooner. And when your smart home just works? That’s the best feeling in the world.

Got questions? Hit me up in the comments. I’ve been there, done that, and I’m happy to help.