Quick and Easy Guide: Attach Blink Camera to Mount in Minutes!

Are you excited about installing your new Blink camera and eager to get it up onto its mount? Well, you’re in the right place! Attaching a Blink camera to its mount can seem like a daunting task, but with the right information and a bit of patience, it’s actually quite simple. In this blog post, we’ll walk you through the steps for attaching your camera to its mount. Whether you’re a seasoned DIYer or a first-time camera owner, we’ve got you covered.

So grab your camera and let’s get started!

Tools Needed

If you’re wondering how to attach your Blink camera to a mount, you’ll need a few tools to make it happen. Firstly, you’ll need the mount itself – usually, this will be a flexible mount that attaches to a sturdy surface, such as a wall or ceiling. You’ll also need some screws to secure the mount to the surface.

To attach the camera to the mount, you’ll need the magnetic mount that came with the Blink camera. This should fit securely onto the bottom of the camera. Once you have your mount and screws ready, you can attach the mount to the surface and then attach the magnetic mount to the bottom of the camera.

This should allow you to easily attach and detach the camera from the mount as needed. With these tools, you’ll be able to set up your Blink camera and get the best possible view of your space.

Blink Camera and Mount

If you’re setting up a Blink camera and mount, you’ll only need a few tools to get started. The first thing you’ll need is a drill with various drill bits, depending on the material you’ll be drilling into. You’ll also need screws, anchors, and a screwdriver.

In addition, it can be helpful to have a level to ensure your Blink camera is mounted straight and a ruler or measuring tape to measure the distance between the camera and its mount. All in all, these tools should be easy to find at your local hardware store or online retailer. With these tools at your disposal, mounting your Blink camera should be a breeze.

how to attach blink camera to mount

Step-by-Step Guide

Attaching your Blink camera to a mount can significantly improve the security of your home or business. Follow these simple steps to secure your Blink camera to a mount: Firstly, locate the mounting hole at the bottom of the camera. Next, connect the mount to the camera by gently pushing it into the mounting hole.

Hold the camera and mount together at the angle you want to position it. Screw the mount onto a surface, making sure it is firm and secure. Finally, test the camera by ensuring it’s correctly positioned and that you have a clear view of the area you want to monitor.

In no time, you’ll have your Blink camera up and running with a secure mount.

Step 1: Remove the back cover of the Blink Camera

Removing the back cover of your Blink camera is the first step in getting started with installation. To do this, you’ll need to grab the camera and turn it upside down. On the bottom of the camera, there is a small tab that you’ll need to press and hold in order to release the back cover.

Once you’ve done this, the cover should slide off relatively easily. Just be sure to keep a firm grip on the camera itself as you do this, as you don’t want it falling to the ground or becoming damaged. With the back cover removed, you’ll be able to access the battery compartment and other important features of the camera.

So, take your time and be gentle when removing the cover to ensure a smooth and successful installation process.

Step 2: Attach the mount to the wall

Once you’ve found the ideal location to mount your TV, it’s time to attach the mount to the wall. A proper, secure installation is crucial to ensure your TV stays put and doesn’t fall or tilt unexpectedly. Here’s a step-by-step guide to help you get it right.

First, hold up the mount to the wall and use a pencil to mark where the screws will go. Check that the mount is level using a spirit level, as even a slight tilt can affect the angle of the TV. Once you’re satisfied with the placement, use a drill to make holes in the wall where you’ve marked them.

Next, insert anchors into the holes to provide a sturdy base for the screws to grip onto. Finally, attach the mount to the wall using screws and bolts, and make sure everything is tight and secure before hanging your TV. By following these steps, you’ll be able to safely mount your TV and enjoy your favorite shows without any worries.

Step 3: Screw the Blink Camera to the mount

Now that you’ve secured the mount and are happy with its position, it’s time to attach your Blink camera. Screw the camera into the mount and make sure it’s tightly fastened to avoid any risk of the camera falling. Use the appropriate screwdriver to ensure you can secure the camera to the mount safely.

Before continuing with any additional setup, make sure that the camera is angled accurately to capture the area that you’d like it to watch. It’s worth noting that if you’ve installed your mount high up or in a difficult-to-reach area, you might want to consider using a ladder or getting someone to help you with the installation process. Once the camera is securely attached, adjust the angle using the mount to ensure that the camera is aimed at the specific area you need it to monitor.

This step of the setup is critical to the overall performance of your surveillance system, so take the time to fine-tune your camera’s position to guarantee accurate monitoring. With your Blink camera securely mounted and angled properly, you’re one step closer to enjoying your new home surveillance system!

Step 4: Adjust the Blink Camera’s position

Adjusting the position of your Blink camera is an essential step that can significantly improve its performance. To begin with, choose the best position for placing your camera based on your needs. Then, mount it to the preferred surface using the provided mount.

Adjust the camera’s angle and tilt to make sure it captures the desired view. You can use the Blink app to view the camera’s live feed and check if the position provides clear footage. Make sure the camera is at a higher level than the intruder’s height to avoid tampering.

Also, avoid direct sunlight on the camera’s lens, as it can compromise the footage’s quality. Finally, test the camera’s footage by walking past it to ensure it captures motion accurately. By adjusting the camera’s position correctly, you can guarantee that you’ll get the best out of your Blink camera.

Troubleshooting Tips

When it comes to mounting your Blink camera, it can be a bit tricky to figure out how to attach it properly. But don’t worry, it’s not as difficult as it may seem! Firstly, ensure that you have the correct mount for your camera model. Once you have the mount, remove the screw from the base of your camera and carefully align it with the mount.

Make sure that the metal teeth on the mount are lined up with the corresponding slots on the camera’s base. Once aligned, insert the screw back into the base, and secure it tightly onto the mount. Voila! Your Blink camera is mounted and ready to go.

With a bit of practice and patience, you’ll be able to attach it with ease every time.

Ensure the mount is securely attached

When it comes to mounting equipment, it’s essential to ensure that the mount is securely attached. A wobbly or unstable mount can cause serious issues, not least of which is damage to the equipment itself. To troubleshoot a loose mount, start by checking all of the fasteners and screws.

If any are loose, tighten them up with a screwdriver or wrench. It’s also important to make sure that the mount is installed correctly and that it’s the right size and type for the equipment you’re mounting. If you’re unsure about any aspect of the installation, consult the equipment’s manual or contact the manufacturer for guidance.

Remember, a securely attached mount is key to ensuring that your equipment operates smoothly and without any issues. So take the time to double-check the mounting before putting your equipment to work.

Ensure the Blink Camera is properly installed

One of the most common issues with Blink Cameras is incorrect installation. To ensure that your Blink Camera is installed properly, you need to locate it in an area that is within the range of your Wi-Fi signal. The camera should be placed at least three feet from any obstructions, such as walls or furniture, that could interfere with the signal.

Additionally, the Blink Camera should be mounted at the right height, so that it is not too low or too high. Finally, make sure that the Blink Camera is securely attached to the wall or ceiling, so that it does not move or fall off. By taking these simple steps, you can help ensure that your Blink Camera is properly installed and will function correctly.

If you still face issues, try resetting the camera and re-installing it. This will often resolve most problems and help get your Blink Camera up and running again.


Well, there you have it folks! Attaching your Blink camera to its mount is as easy as pie – just a few simple steps and you’re good to go. And now, with your trusty Blink camera locked and loaded, you can keep a watchful eye on your home or office without ever breaking a sweat. So, whether you’re a tech-savvy whiz or a complete newbie, you can rest easy knowing that the power to protect your space is right at your fingertips.

Happy guarding, everyone!”


What is the process to attach the Blink camera to mount?
To attach the Blink camera to the mount, first, remove the protective covering from the camera’s base. Then, align the camera’s base with the mount and insert it into the slot. Next, tighten the screw to secure the mount, and the camera will be attached.

Can the Blink camera be mounted outdoors?
Yes, the Blink camera can be mounted outdoors. However, it is important to ensure that it is protected from harsh weather conditions, and the mount is properly secured.

Is it necessary to use a specific mount for the Blink camera?
No, it is not necessary to use a specific mount for the Blink camera. However, it is recommended to use the manufacturer’s recommended mount or a sturdy mount that can securely hold the device and is compatible with the camera.

How can I adjust the viewing angle of the Blink camera once it is mounted?
To adjust the viewing angle of the Blink camera, loosen the screw that secures the camera to the mount. Then, adjust the camera position as desired, and tighten the screw back to lock it in place. This will enable you to adjust the camera’s viewing angle as needed.

Can I reposition the Blink camera after mounting it on a surface?
Yes, the Blink camera can be repositioned after mounting it on a surface. However, it will require unscrewing it from the mount and repositioning it. It is important to ensure that the mount is securely attached before repositioning the camera to prevent any damage to the device.