How to Change Amcrest Camera Ip Addresss

How to Change Amcrest Camera Ip Addresss

by

Changing your Amcrest camera IP address is essential for managing your IP camera on a network. This guide walks you through the process using the Amcrest View app or web interface, helping you avoid conflicts and improve connectivity. Whether you’re setting up remote viewing or fixing connection issues, these simple steps ensure your system runs smoothly.

Quick Answers to Common Questions

Can I change my Amcrest camera IP wirelessly?

Yes! You can change the IP address using the Amcrest View Pro app or through the camera’s web interface from any device on the same Wi-Fi network.

Will changing the IP affect my recordings?

No, changing the IP address does not delete or affect stored footage. All recordings remain intact on the SD card or NVR.

What if I lose access to my camera?

Try rebooting the camera, checking the new IP for accuracy, or performing a factory reset (press the reset button for 10 seconds).

Is it safe to use a static IP?

Yes, as long as you avoid IP conflicts and assign the static address outside your router’s DHCP range (e.g., 192.168.1.100–192.168.1.150).

Do I need technical skills to change the IP?

Not at all! This guide uses simple language and step-by-step instructions suitable for beginners and non-technical users.

How to Change Amcrest Camera IP Address – Complete Guide

Are you struggling to access your Amcrest camera after a network change? Or maybe you’ve noticed duplicate IP addresses causing conflicts? Changing the IP address of your Amcrest camera is a common task that improves network management, enables smoother remote access, and helps resolve connectivity issues. This comprehensive guide will walk you through every step—whether you’re using a desktop, laptop, or mobile device—to safely and effectively update your camera’s IP settings.

By the end of this guide, you’ll understand not only how to change the IP address but also why it matters, when to do it, and how to avoid common pitfalls. Let’s dive in!

Why Change Your Amcrest Camera IP Address?

Your Amcrest camera gets an IP address when it connects to your router. This address lets other devices on your network communicate with the camera. Over time, you might need to change this address for several reasons:

How to Change Amcrest Camera Ip Addresss

Visual guide about How to Change Amcrest Camera Ip Addresss

Image source: upload.wikimedia.org

  • Network Restructuring: After moving your camera to a different location or updating your Wi-Fi setup.
  • IP Conflicts: Two devices on the same network can’t share the same IP. Changing one resolves the conflict.
  • Remote Access Setup: Some cloud services or DDNS configurations require a stable, known IP.
  • Troubleshooting Connectivity: If your camera becomes unreachable, resetting its IP can restore access.

Understanding these reasons helps you decide when and how to proceed. Now, let’s get into the actual steps.

Step-by-Step: How to Change Amcrest Camera IP Address Using Web Interface

The most reliable way to change your Amcrest camera’s IP is through its built-in web interface. This method works on any device connected to the same local network as the camera.

What You’ll Need

  • A computer or mobile device (smartphone/tablet) on the same network as the camera.
  • The current IP address of your Amcrest camera.
  • Your camera’s username and password (default is often admin/admin).
  • A web browser (Chrome, Firefox, Safari, etc.).

Step 1: Find Your Camera’s Current IP Address

If you don’t know your camera’s current IP, you can find it in one of two ways:

  1. Check Your Router: Log into your router’s admin page (usually at 192.168.1.1), go to “Connected Devices,” and look for your camera by name or MAC address.
  2. Use Amcrest View App: Open the Amcrest View app, select your camera, and tap the info icon—it usually shows the IP address.

Step 2: Access the Camera’s Web Interface

  1. Type the camera’s IP address into your browser’s address bar.
  2. Press Enter.
  3. Log in using your credentials (default is typically admin/admin).

Step 3: Navigate to Network Settings

Once logged in:

  1. Click on the “Settings” tab (usually top menu).
  2. Select “Network” from the left sidebar.
  3. Choose “IPv4” or “LAN” settings.

Step 4: Change the IP Address

Here’s where the magic happens:

  1. Look for fields labeled “IP Address,” “Subnet Mask,” and “Gateway.”
  2. Enter your desired new IP address. Make sure it’s within your network range (e.g., if your router is 192.168.1.1, use something like 192.168.1.105).
  3. Leave Subnet Mask as 255.255.255.0 unless instructed otherwise.
  4. Set Gateway to your router’s IP (e.g., 192.168.1.1).
  5. If using static IP, turn off DHCP. If using dynamic, leave DHCP enabled.

Step 5: Save and Reconnect

  1. Click “Apply” or “Save”.
  2. Wait 10–30 seconds for the camera to reboot.
  3. Try accessing the new IP in your browser.

Alternative Method: Change IP via Amcrest View Pro App

If you prefer using your smartphone or tablet, the Amcrest View Pro app offers an easy way to change your camera’s IP without a computer.

Step 1: Install and Open Amcrest View Pro

Download the app from the Google Play Store or Apple App Store. Launch it and log in with your account.

Step 2: Select Your Camera

Tap the camera you want to configure.

Step 3: Access Device Settings

  1. Tap the gear icon (⚙️) in the top-right corner.
  2. Go to “Device Settings”.
  3. Select “Network”.

Step 4: Modify IP Configuration

  1. Toggle “Static IP” to ON if you want a fixed address.
  2. Enter the new IP address, subnet mask, and gateway.
  3. Save changes.

Step 5: Confirm the New IP

Reopen the app or browser and test the new IP. The app may prompt you to reconnect.

Practical Tips for Smooth IP Changes

Making IP changes can be tricky if you rush. Follow these tips to avoid frustration:

  • Use a Reserved IP: Assign a static IP outside the DHCP pool to prevent future conflicts.
  • Keep Notes: Write down the old and new IPs in case you need to revert.
  • Restart Devices: Power cycle your router and camera after changing the IP.
  • Check Firewall Rules: Ensure your firewall isn’t blocking port 80 or 443.
  • Update Firmware: Outdated firmware can cause IP configuration glitches.

Troubleshooting Common Issues

Even with careful steps, things don’t always go as planned. Here’s how to fix frequent problems:

Issue: Can’t Access Camera After IP Change

This is the most common problem. Try these fixes:

  • Double-check the new IP address for typos.
  • Ensure the camera has rebooted completely.
  • Verify your computer is on the same network segment.
  • Try pinging the new IP in Command Prompt (Windows) or Terminal (Mac): ping 192.168.1.105

Issue: Login Fails Even with Correct Credentials

  • The camera might be locked due to failed login attempts. Wait 5 minutes or reset it.
  • Try using the default admin/admin if you’ve forgotten your password.
  • Reset the camera via the physical reset button (hold for 10 seconds).

Issue: App Shows “Device Offline”

  • The app caches old connection data. Log out and back in.
  • Remove and re-add the camera in the app.
  • Make sure both devices are on the same Wi-Fi band (2.4GHz vs 5GHz).

When to Use Static IP vs DHCP

Choosing between static and dynamic IPs depends on your setup:

Feature Static IP DHCP
Stability Always the same May change over time
Best For Cameras, servers, printers Personal devices, guests
Management Manual setup required Automatic, less work

Recommendation: For Amcrest cameras, use static IP if you plan to access them remotely or integrate with NVRs. Use DHCP for temporary setups or guest networks.

Advanced: Setting Up Port Forwarding After IP Change

If you’re setting up remote access, changing the IP might affect your port forwarding rules. Here’s how to update them:

  1. Log into your router.
  2. Go to Port Forwarding or Virtual Servers.
  3. Update the internal IP in the rule to match your camera’s new address.
  4. Save and test by accessing your camera via public IP or DDNS hostname.

Security Considerations When Changing IPs

While changing an IP seems harmless, it can impact security:

  • Disable UPnP: Unnecessary UPnP can expose your camera to external attacks.
  • Change Default Passwords: Never leave admin/admin active long-term.
  • Enable HTTPS: In camera settings, force encrypted connections.
  • Regular Audits: Check connected devices monthly for unknown entries.

Conclusion

Changing your Amcrest camera IP address is a straightforward process that empowers you to manage your surveillance system more effectively. Whether you’re avoiding IP conflicts, preparing for remote access, or fixing connection issues, following the steps in this guide ensures success. Remember to document your new IP, keep firmware updated, and test thoroughly after each change.

With this knowledge, you’re now equipped to handle any IP-related challenge your IP camera throws at you. Stay secure, stay connected, and enjoy peace of mind knowing your system is running optimally.