Changing a camera’s IP in a Hikvision NVR 2026 is quick and straightforward—access the NVR’s web interface, navigate to the camera settings, and manually enter the new IP address while ensuring it matches your network’s subnet. Always double-check the IP configuration to avoid connectivity issues, and reboot the system if changes don’t apply immediately.

How to Change Camera IP in Hikvision NVR 2026 Guide

Key Takeaways

• Access the NVR menu: Navigate to Configuration > Camera Management to begin.
• Select the camera: Choose the correct IP camera from the list of connected devices.
• Modify IP settings: Edit the IP address, subnet mask, and gateway as needed.
• Verify network compatibility: Ensure the new IP matches your network’s range and settings.
• Save and reboot: Apply changes and restart the camera for updates to take effect.
• Test connectivity: Confirm the camera is online and streaming via the new IP address.

Why This Matters / Understanding the Problem

Imagine setting up your Hikvision security system, only to find one camera isn’t connecting. You check the cables, reboot the NVR, and still—nothing. The issue? An IP conflict. When two devices on the same network share the same IP address, your Hikvision NVR can’t communicate with one of them. This is where learning how to change camera IP in Hikvision NVR 2026 guide becomes essential.

Whether you’re upgrading your system, adding new cameras, or troubleshooting network issues, managing IP addresses ensures smooth operation. Without proper IP configuration, you risk blind spots, failed recordings, or even total camera failure. The Hikvision DS-7600/7700/8600 NVR series (including the 2026 model) supports multiple ways to reassign IPs—manually, automatically, or remotely.

This guide walks you through every method, from beginner-friendly to advanced. By the end, you’ll confidently manage your camera IPs and keep your surveillance system running like clockwork. No tech degree required—just clear, practical steps.

What You Need

Before diving into the how to change camera IP in Hikvision NVR 2026 guide, gather these tools and materials. Having everything ready saves time and avoids frustration.

• Hikvision NVR (DS-7600/7700/8600 series) – Your central recording unit.
• Hikvision IP cameras – Connected to the NVR via PoE switch or direct cable.
• Computer or smartphone – To access the NVR interface or use Hik-Connect.
• Network cable (Cat5e/Cat6) – For direct connection or troubleshooting.
• Hikvision SADP Tool (Software) – Free IP scanner and configurator. Download from Hikvision’s official site.
• Web browser – Chrome, Firefox, or Edge for accessing the NVR’s web interface.
• Hik-Connect app (optional) – For remote IP management.
• Notepad or digital document – To track new IP addresses and avoid duplicates.

Pro Tip: Always label your cameras physically (e.g., “Front Door,” “Garage”) and note their MAC addresses. This makes IP changes much easier later.

Step-by-Step Guide to How to Change Camera IP in Hikvision NVR 2026 Guide

Step 1: Access the Hikvision NVR Interface

Start by logging into your NVR. This is your command center for all camera settings.

• Connect a monitor, keyboard, and mouse to your NVR. Power it on.
• Log in using your admin credentials. Default is often admin and a password you set (or left blank).
• Navigate to Main Menu > System > Network to view current IP settings.

If your camera isn’t showing up, don’t panic. It might have a different IP range. That’s where the next steps help.

Warning: Never change the NVR’s own IP address unless you’re sure about your network setup. Doing so can disconnect all cameras.

Step 2: Use the SADP Tool to Discover Cameras

The SADP (Search Active Device Protocol) tool is Hikvision’s go-to utility for finding and managing cameras. It scans your network and lists all Hikvision devices—even those with IP conflicts.

• Download and install the SADP Tool from Hikvision’s support page.
• Run the tool on a computer connected to the same network as your NVR.
• Click Refresh. The tool will display all Hikvision devices, including IP cameras.
• Look for your camera in the list. Check the IP Address, Port, MAC Address, and Status.

If the camera shows “Conflict” or “Offline,” it likely has an IP issue. Note its current IP and MAC address.

Pro Tip: Use the Filter option in SADP to show only cameras with “Conflict” status. This speeds up troubleshooting.

Step 3: Change IP via SADP Tool (Recommended for Beginners)

SADP lets you change IPs without touching the camera physically. This is perfect for remote or hard-to-reach cameras.

• In the SADP Tool, select the camera with the IP issue.
• Click Modify Network Parameters.
• Enter a new, unique IP address. Use the same subnet as your NVR. For example:
  • If your NVR is 192.168.1.100, set the camera to 192.168.1.101, 192.168.1.102, etc.
  • Subnet Mask: Usually 255.255.255.0
  • Gateway: Same as your router (e.g., 192.168.1.1)
  • Port: Default is 8000 (keep unless changed)
• Enter the camera’s password (if set).
• Click Save. The tool will update the IP and restart the camera.

Wait 1–2 minutes for the camera to reboot. Refresh the SADP list to confirm the new IP.

Common Mistake: Using an IP outside the NVR’s subnet (e.g., 192.168.2.x when NVR is 192.168.1.x). This causes communication failure.

Step 4: Reconnect Camera to NVR (Auto or Manual)

After changing the IP, your NVR needs to “see” the camera again. Here’s how.

• Auto Add (Recommended):
  • Go to Main Menu > Camera > Camera.
  • Click Auto Add. The NVR scans the network and adds the camera with its new IP.
• Manual Add (If Auto Fails):
  • Click Add > Manual Add.
  • Enter the camera’s new IP, port (8000), username (admin), and password.
  • Click OK. The NVR connects to the camera.

Once added, check the live view. If the camera appears, you’ve successfully completed this step of the how to change camera IP in Hikvision NVR 2026 guide.

Step 5: Change IP via Camera’s Web Interface (Direct Access)

For cameras accessible via a computer (e.g., connected directly via cable), use the web interface.

• Connect a computer directly to the camera using an Ethernet cable.
• Set your computer’s IP to the same subnet (e.g., 192.168.1.50, subnet 255.255.255.0).
• Open a browser and enter the camera’s current IP (from SADP).
• Log in with admin credentials.
• Navigate to Configuration > Network > TCP/IP.
• Enter the new IP, subnet, gateway, and port.
• Click Save. The camera reboots.

Disconnect the cable and reconnect the camera to the network. Use SADP or NVR to verify the new IP.

Warning: Never change the camera’s IP to match another device on the network. Always double-check for conflicts.

Step 6: Use NVR’s Built-in IP Modification (Advanced)

Some Hikvision NVRs (including 2026 models) let you modify camera IPs directly from the NVR interface—no external tools needed.

• Go to Main Menu > Camera > Camera.
• Select the camera (it must already be added to the NVR).
• Click Modify or the gear icon.
• Enter the new IP address and port.
• Click Save. The NVR sends a command to the camera to update its IP.
• Wait for the camera to reboot. The NVR will reconnect automatically.

This method works best when the camera is already connected and responsive. If it’s offline, use SADP instead.

Step 7: Test and Verify

After changing the IP, thorough testing ensures everything works.

• Check the live view on the NVR. Is the camera streaming?
• Verify recording: Play back footage from the camera.
• Test motion detection and alerts (if enabled).
• Use the SADP Tool to confirm the new IP is active and conflict-free.
• Try remote access via Hik-Connect app to ensure the camera appears online.

If any issues arise, double-check the IP, subnet, gateway, and password. Reboot the camera and NVR if needed.

Pro Tips & Common Mistakes to Avoid

Even small mistakes can derail your how to change camera IP in Hikvision NVR 2026 guide efforts. Here’s how to stay ahead.

Pro Tip #1: Use a static IP range. Assign a dedicated pool (e.g., 192.168.1.100–199) for cameras. This prevents DHCP conflicts and makes management easier.

Pro Tip #2: Document every change. Keep a spreadsheet with camera names, MAC addresses, IPs, and locations. Update it after every IP change.

Pro Tip #3: Test one camera at a time. If you’re changing multiple IPs, do them individually. This isolates issues quickly.

Pro Tip #4: Enable ONVIF if needed. Some third-party systems require ONVIF. Enable it in the camera’s web interface under System > Security > ONVIF.

Common Mistake #1: Forgetting to reboot. Always reboot the camera after changing its IP. Some changes won’t take effect until then.

Common Mistake #2: Using the wrong subnet mask. A mismatch (e.g., 255.255.0.0 vs. 255.255.255.0) blocks communication, even if the IP is correct.

Common Mistake #3: Ignoring firewall settings. If you’re accessing the camera remotely, ensure port 8000 (or your custom port) is open in your router’s firewall.

Common Mistake #4: Changing NVR IP without updating cameras. If you must change the NVR’s IP, update all camera IPs to match the new subnet first.

FAQs About How to Change Camera IP in Hikvision NVR 2026 Guide

Q1: Can I change the camera IP without using a computer?
Yes! Use the NVR’s built-in IP modification feature (Step 6). As long as the camera is already connected, you can change its IP directly from the NVR interface. No extra tools needed.

Q2: What if the camera doesn’t show up in SADP?
Try these fixes:

• Ensure the camera is powered and connected to the network.
• Check for physical damage or loose cables.
• Reboot the camera and NVR.
• Use a direct cable connection to the camera and computer.
• Verify the camera’s network settings (e.g., DHCP vs. static).

If it still doesn’t appear, the camera may have a hardware issue or firmware bug.

Q3: How do I find my NVR’s subnet?
Go to Main Menu > System > Network. The NVR’s IP address and subnet mask are displayed there. For example, if the IP is 192.168.1.100 and subnet is 255.255.255.0, your subnet is 192.168.1.x.

Q4: Can I use DHCP for camera IPs?
Yes, but it’s not recommended. DHCP can assign the same IP to multiple devices, causing conflicts. For reliability, use static IPs. If you must use DHCP, enable DHCP Reservation in your router to assign fixed IPs based on MAC addresses.

Q5: Why does my camera keep disconnecting after IP change?
This usually happens due to:

• Incorrect subnet or gateway settings.
• Firewall blocking port 8000.
• Weak or unstable network connection (e.g., long cable runs).
• Camera firmware issues (update via Hikvision’s website).

Double-check all settings and test the connection with a shorter cable.

Q6: How many cameras can the Hikvision NVR 2026 support?
The DS-7600/7700/8600 series supports 4 to 64 channels, depending on the model. The 2026 model typically supports 8, 16, or 32 cameras. Check your NVR’s specs for exact numbers.

Q7: Can I change the NVR’s IP address too?
Yes, but do it carefully. Go to Main Menu > System > Network, change the IP, subnet, and gateway, then reboot. Important: Update all camera IPs to match the new subnet first, or they’ll disconnect.

Final Thoughts

Changing a camera IP in your Hikvision NVR 2026 isn’t rocket science—it’s a matter of using the right tools and following a clear process. Whether you use the SADP Tool, the NVR interface, or the camera’s web portal, this how to change camera IP in Hikvision NVR 2026 guide equips you with everything you need.

Remember: plan your IP scheme, test after each change, and keep a record. These habits prevent future headaches and keep your security system reliable.

Now it’s your turn. Grab your tools, follow the steps, and take control of your camera network. Got a tricky setup? Share your experience in the comments—we’d love to help you troubleshoot. And if this guide saved you time, bookmark it for next time. Happy monitoring!