How to Change Foscam E1 Camera Name

Changing the name of your Foscam E1 camera helps you identify it easily, especially if you have multiple devices. This guide walks you through the process using the web interface and mobile app, with troubleshooting tips included.

Key Takeaways

• Access the camera’s web interface: Use a browser to log in to your Foscam E1’s IP address and navigate to system settings.
• Use the Foscam app for quick changes: The iOS or Android app allows renaming directly from your smartphone or tablet.
• Ensure stable network connection: A strong Wi-Fi signal prevents errors during configuration.
• Save changes properly: Always click “Save” or “Apply” after renaming to avoid losing settings.
• Re-login after renaming: Some changes may require re-authentication to take effect.
• Troubleshoot common issues: If renaming fails, check login credentials, firmware, or reset the camera if needed.
• Use descriptive names: Choose names like “Front Door” or “Baby Room” for better organization.

Introduction: Why Rename Your Foscam E1 Camera?

If you’ve recently set up a Foscam E1 indoor Wi-Fi security camera, you might notice it comes with a generic default name like “Foscam_E1_XXXX” (where XXXX is a series of numbers). While this works fine for basic use, it becomes confusing when you have multiple cameras around your home or office. Renaming your Foscam E1 camera makes it easier to identify which feed belongs to which location—like “Living Room,” “Backyard,” or “Nursery.”

In this comprehensive guide, you’ll learn how to change the Foscam E1 camera name using two reliable methods: the built-in web interface and the official Foscam mobile app. Whether you’re tech-savvy or just getting started with home security, this step-by-step walkthrough ensures you can personalize your camera in just a few minutes. We’ll also cover common pitfalls, troubleshooting tips, and best practices to keep your system running smoothly.

By the end of this article, you’ll not only know how to rename your camera but also understand why doing so improves your overall surveillance experience. Let’s get started!

What You’ll Need Before You Begin

Before diving into the renaming process, make sure you have the following ready:

• Your Foscam E1 camera powered on and connected to Wi-Fi – The camera must be online and accessible on your local network.
• Admin login credentials – You’ll need the username and password you set during initial setup (default is often “admin” with no password, but we strongly recommend changing this for security).
• A smartphone, tablet, or computer – You can use either a mobile device with the Foscam app installed or a computer with a web browser.
• Stable internet connection – A weak signal can interrupt the renaming process or cause timeouts.
• Camera’s IP address (for web method) – You can find this in your router’s connected devices list or via the Foscam app.

Having these items ready will help you avoid frustration and complete the process quickly.

Method 1: Change Foscam E1 Camera Name via Web Interface

The web interface gives you full control over your camera’s settings and is ideal if you prefer using a desktop or laptop. Here’s how to do it:

Step 1: Find Your Camera’s IP Address

To access the camera’s settings, you first need its local IP address. Here’s how:

• Open your router’s admin page (usually by typing 192.168.1.1 or 192.168.0.1 into your browser).
• Log in with your router credentials.
• Navigate to “Connected Devices,” “DHCP Clients,” or “LAN Settings.”
• Look for a device named “Foscam” or with a MAC address matching your camera (found on the camera’s label).
• Note down the IP address (e.g., 192.168.1.105).

Alternatively, use the Foscam app:

• Open the Foscam app and go to “Device List.”
• Tap on your camera, then “Settings” > “Network” to view the IP address.

Step 2: Access the Camera’s Web Interface

Now that you have the IP address:

• Open a web browser (Chrome, Firefox, Safari, etc.).
• Type the IP address into the address bar and press Enter.
• You’ll see a login screen. Enter your admin username and password.
• If you haven’t changed the defaults, try admin for username and leave the password field blank (though this is not recommended for security).

Tip: If the page doesn’t load, ensure your computer is on the same network as the camera and that no firewall is blocking access.

Step 3: Navigate to System Settings

Once logged in:

• Look for a menu or tab labeled “Setup,” “Settings,” or “Configuration.”
• Click on “System” or “Device Settings.”
• You should see options like “Device Name,” “Camera Name,” or “Alias.”

The exact wording may vary slightly depending on your firmware version, but the option is typically under system or device information.

Step 4: Change the Camera Name

Here’s where the magic happens:

• Locate the field labeled “Device Name” or “Camera Name.”
• Delete the current name (e.g., “Foscam_E1_1234”).
• Type in your desired name—something clear and descriptive like “Kitchen Cam” or “Front Porch.”
• Avoid special characters or spaces if possible; use hyphens or underscores instead (e.g., “Baby_Room”).

Example: If you’re monitoring your living room, rename it to “Living_Room_Cam” for easy identification.

Step 5: Save and Apply Changes

After entering the new name:

• Click the “Save,” “Apply,” or “Submit” button at the bottom of the page.
• Wait a few seconds for the camera to process the change.
• You may be prompted to re-login—this is normal.
• Once back in, verify the name has updated in the device info section.

Pro Tip: Take a screenshot or note down the new name and IP address for future reference.

Step 6: Test the Change

To confirm the rename worked:

• Go back to your router’s connected devices list—the camera should now appear with the new name.
• Open the Foscam app and check if the device name has updated there too (it may take a minute to sync).
• Try accessing the camera feed using the new name in any third-party software or NVR system.

If everything looks good, you’ve successfully renamed your Foscam E1 camera via the web interface!

Method 2: Change Foscam E1 Camera Name Using the Mobile App

If you prefer using your smartphone or tablet, the Foscam app offers a quicker and more user-friendly way to rename your camera. Here’s how:

Step 1: Download and Open the Foscam App

Make sure you have the official Foscam app installed:

• For iOS: Search “Foscam” in the App Store and download the app by Foscam Intelligent Technology.
• For Android: Go to Google Play Store and install the official Foscam app.
• Open the app and log in with your Foscam account (or create one if you haven’t already).

Note: You must have your camera added to the app before you can rename it. If not, follow the in-app setup wizard to connect your E1 camera.

Step 2: Select Your Camera

Once logged in:

• Tap on “Device List” or the home screen where your cameras are displayed.
• Find your Foscam E1 camera in the list.
• Tap on the camera name or the settings (gear) icon next to it.

Step 3: Access Device Settings

In the camera’s detail screen:

• Look for “Settings,” “Device Info,” or “Camera Settings.”
• Tap to open the settings menu.
• Scroll down to find “Device Name,” “Camera Name,” or “Alias.”

This section may be under “General” or “System” depending on your app version.

Step 4: Edit the Camera Name

Now, rename your camera:

• Tap on the current name to edit it.
• Delete the old name and type in your preferred name (e.g., “Garage Cam”).
• Use simple, clear names without special symbols for best compatibility.

Example: If the camera is in your child’s room, name it “Kids_Room” for quick recognition.

Step 5: Save the Changes

After typing the new name:

• Tap “Save,” “Done,” or the checkmark icon.
• The app will send the update to the camera.
• Wait a few seconds for confirmation—you may see a “Settings saved” message.

Step 6: Verify the Update

To ensure the change took effect:

• Go back to the device list—your camera should now show the new name.
• Try playing the live feed to confirm the camera is still accessible.
• If you use multiple devices, check that the name syncs across all platforms.

The mobile app method is ideal for quick adjustments and is especially handy when you’re on the go.

Best Practices for Naming Your Foscam E1 Camera

Choosing the right name isn’t just about convenience—it’s about efficiency and security. Here are some tips:

• Be descriptive but concise: Use names like “Back_Door” or “Patio” instead of vague terms like “Cam1.”
• Avoid personal information: Don’t use names like “Johns_Room” or “Safe_House” that could reveal sensitive details if accessed by others.
• Use consistent formatting: Stick to lowercase or uppercase and use underscores instead of spaces (e.g., “living_room”).
• Include location and purpose: For example, “basement_storage” or “driveway_entrance” helps you understand the camera’s role at a glance.
• Update names when moving cameras: If you relocate a camera, rename it to reflect its new position.

Good naming habits make managing multiple cameras much easier, especially in larger homes or businesses.

Troubleshooting Common Issues

Sometimes, renaming your Foscam E1 camera doesn’t go as planned. Here’s how to fix the most common problems:

Issue 1: Can’t Access the Web Interface

If you can’t log in via the browser:

• Double-check the IP address—ensure it’s correct and the camera is online.
• Try pinging the IP from your computer (open Command Prompt and type ping 192.168.1.105).
• Restart the camera and router, then try again.
• Ensure no browser extensions or firewalls are blocking the connection.

Issue 2: Name Doesn’t Save or Reverts

If the name changes but doesn’t stick:

• Make sure you clicked “Save” or “Apply” after editing.
• Check if the camera has sufficient power—low power can interrupt settings.
• Update the camera’s firmware via the web interface (Settings > Maintenance > Firmware Upgrade).
• Reset the camera to factory settings and reconfigure it if necessary.

Issue 3: App Shows Old Name

If the mobile app still displays the old name:

• Force close the app and reopen it.
• Log out and log back into your Foscam account.
• Check for app updates in the App Store or Google Play.
• Re-add the camera to the app if the issue persists.

Issue 4: Login Credentials Not Working

If you’ve forgotten your password:

• Use the “Forgot Password” feature in the app (if linked to email).
• Perform a factory reset using the reset button on the camera (hold for 10 seconds).
• Reconfigure the camera from scratch, including setting a new password.

Warning: A factory reset erases all settings, so only do this as a last resort.

Conclusion: Simplify Your Security Setup

Renaming your Foscam E1 camera is a small but powerful step toward a smarter, more organized home security system. Whether you use the web interface for detailed control or the mobile app for quick access, the process is simple and takes just a few minutes. By giving your camera a clear, meaningful name, you’ll save time, reduce confusion, and improve your ability to monitor your space effectively.

Remember to choose names that are descriptive, secure, and easy to remember. And if you run into any issues, the troubleshooting tips above will help you get back on track quickly. With your newly named Foscam E1 camera, you’re one step closer to a seamless and efficient surveillance experience.

Now that you know how to change the Foscam E1 camera name, why not rename all your cameras today? Your future self will thank you the next time you’re scanning through multiple feeds!