How to Change Ip Address on Edgertronic Camera

How to Change Ip Address on Edgertronic Camera

by

Changing the IP address on your Edgertronic camera ensures stable network performance and reliable remote viewing. This guide walks you through the process using either the Edgertronic app or a web browser, helping you avoid IP conflicts and improve security. Follow these simple steps to keep your camera online and accessible from anywhere.

Quick Answers to Common Questions

Tip: Can I change the IP without a computer?

Yes! Use the Edgertronic mobile app to scan the camera’s QR code or manually enter the current IP. Navigate to Settings > Network and update the IP directly from your phone or tablet.

Question: What if my router uses a different subnet, like 10.0.0.x?

Adjust accordingly. Just pick an unused IP in that range (e.g., 10.0.0.100) and ensure the gateway matches your router’s IP (likely 10.0.0.1). Always verify with your router’s settings.

Tip: How do I avoid IP conflicts?

Check your router’s list of connected devices before assigning a new IP. Avoid numbers ending in .1, .255, or those already in use. Stick to mid-range values like .100–.200 for easier tracking.

Question: Will changing the IP affect cloud access?

Usually not. Most Edgertronic cameras use cloud services that auto-update when the local IP changes. However, if you use custom DDNS or port forwarding, you may need to update those records.

Tip: What if I lose internet access after the change?

Double-check the gateway and DNS fields. They must match your router’s IP. If unsure, revert to DHCP temporarily and consult your router manual for default gateway settings.

Introduction: Why Change Your Edgertronic Camera’s IP Address?

If you’re managing multiple cameras or troubleshooting connection issues with your Edgertronic security camera, changing its IP address can be a smart move. Whether you’re setting up a new network, resolving conflicts, or enhancing security, updating the IP ensures your camera stays online and accessible. This guide will walk you through every step of changing the IP address on your Edgertronic camera—using both the official app and a web browser—so you can get back to monitoring with confidence.

Edgertronic cameras are known for their high frame rates and professional-grade video quality, making them popular among filmmakers and security professionals alike. But like any networked device, they rely on proper IP configuration to function smoothly. A static IP helps avoid the hassle of dynamic IP changes, especially when accessing the camera remotely or integrating it into a larger surveillance system.

In this comprehensive how-to guide, we’ll cover everything from preparing your network to verifying the new IP works perfectly. No technical jargon overload—just clear, friendly instructions anyone can follow.

What You’ll Need Before Starting

Before diving into the steps, make sure you have the following ready:

  • A computer or smartphone connected to the same network as your Edgertronic camera.
  • The current IP address of the camera (found via router admin panel or previous setup notes).
  • Access to the Edgertronic web interface (typically through a web browser).
  • Administrator login credentials for the camera (default is often admin/password).
  • Knowledge of your router’s IP range (e.g., 192.168.1.x or 10.0.0.x).

Having these ready will save time and prevent confusion during setup. If you don’t know the current IP, don’t worry—we’ll show you how to find it.

How to Change Ip Address on Edgertronic Camera

Visual guide about How to Change Ip Address on Edgertronic Camera

Image source: cdn.macaro-ni.jp

Step 1: Locate Your Edgertronic Camera’s Current IP Address

The first step is identifying the camera’s existing IP address. Without it, logging into the web interface would be nearly impossible.

Method 1: Check via Router Admin Panel

Most home and office routers display connected devices. Here’s how to find your camera:

  1. Open a web browser and type your router’s IP (commonly 192.168.1.1 or 192.168.0.1) into the address bar.
  2. Log in with your router username and password.
  3. Look for a section labeled Connected Devices, DHCP Clients, or Device List.
  4. Find your Edgertronic camera by name or MAC address (often starts with “EDG”).
  5. Note its assigned IP address (e.g., 192.168.1.105).

This method is reliable because it shows real-time assignments made by the router.

Method 2: Use the Edgertronic Mobile App

If you’ve used the app before, it may store the last known IP:

  1. Open the Edgertronic app on your phone or tablet.
  2. Go to Settings > Camera Management.
  3. Select your camera and look for Connection Info or IP Address.
  4. Copy the IP listed there.

Method 3: Run an IP Scan Tool

For advanced users, tools like Advanced IP Scanner (Windows) or Angry IP Scanner work well:

  1. Download and install a trusted IP scanner.
  2. Scan your local network (e.g., 192.168.1.0/24).
  3. Look for a device named “Edgertronic” or with a recognizable model number.
  4. Identify the matching IP address.

Once you’ve found the IP, proceed to log into the camera’s web interface.

Step 2: Access the Edgertronic Camera Web Interface

Now that you have the IP, open a web browser (Chrome, Firefox, Edge, etc.) and enter the IP into the address bar. Press Enter.

Logging In

  1. Type the IP (e.g., http://192.168.1.105) into the browser.
  2. Press Enter. The login page should appear.
  3. Enter your username and password. Default is usually admin/password, but this may vary based on firmware version.
  4. Click Login.

If you’ve forgotten the password, check the camera label or reset it using the physical reset button (usually a small hole near the ports).

Navigating the Dashboard

After logging in, you’ll see the main dashboard with options like:

  • Live View
  • Playback
  • Settings
  • System

We’re interested in Settings, specifically the Network Configuration section.

Step 3: Navigate to Network Settings

Within the settings menu, find the section related to network or LAN configuration.

Locating Network Options

  1. Click on Settings in the top navigation.
  2. Select Network or LAN Settings.
  3. You may see tabs like Basic, Advanced, or Static IP. Click on the appropriate one.

On some firmware versions, you might need to enable Static IP Mode first. Toggle this switch if available.

Step 4: Configure a New Static IP Address

Here’s where the actual change happens. You’ll replace the current IP with a new one.

Choosing the Right IP Address

Pick an unused IP within your subnet. For example:

  • Current subnet: 192.168.1.0
  • Router IP: 192.168.1.1
  • Available range: 192.168.1.2 to 192.168.1.254

Avoid .1 (router), .255 (broadcast), and any already in use. Pick something easy to remember, like 192.168.1.110.

Filling Out the Form

In the network settings form:

  1. IP Address: Enter the new IP (e.g., 192.168.1.110)
  2. Subnet Mask: Usually 255.255.255.0 (leave unchanged unless advised by IT)
  3. Default Gateway: Should match your router’s IP (e.g., 192.168.1.1)
  4. DNS Server: Often the same as gateway, or public DNS like 8.8.8.8

Double-check each field before saving. Typos can cause connection failure.

Step 5: Save Changes and Reboot the Camera

After entering the new IP details, apply the settings.

Saving and Restarting

  1. Click Apply or Save.
  2. The camera will briefly disconnect. Wait 1–2 minutes.
  3. Reconnect to the camera using the new IP address (e.g., http://192.168.1.110).
  4. Log in again with your credentials.

If the camera doesn’t respond, check your network cable or Wi-Fi connection. A hard reboot may help.

Step 6: Verify the New IP Is Working

Confirm everything is functioning as expected.

Test Connectivity

Try the following:

  • Open a browser and go to the new IP.
  • Check live video feed.
  • Ping the camera from your PC: Open Command Prompt and type ping 192.168.1.110.
  • Ensure no errors appear.

Update Remote Access (Optional)

If you access the camera remotely, update your DDNS or cloud service with the new IP. Most Edgertronic systems support cloud viewing, so no changes may be needed there.

Troubleshooting Common Issues

Even with careful steps, things can go wrong. Here’s how to fix common problems.

Camera Not Responding After IP Change

This usually means the IP is invalid or already in use.

  • Check if another device has taken the new IP.
  • Try a different IP within the range.
  • Reset the camera and retry.

Can’t Log In After Change

Ensure you’re using the correct IP. Also verify:

  • Username/password haven’t changed.
  • Browser cache isn’t interfering (try incognito mode).
  • Firewall isn’t blocking port 80 or 443.

Lost Remote Access

If you rely on remote viewing:

  • Update port forwarding rules in your router if using custom ports.
  • Re-register the camera in your cloud account if needed.

Bonus: Using the Edgertronic App with a New IP

Once the IP is updated, reconnect via the mobile app:

  1. Open the Edgertronic app.
  2. Tap Add Camera or +.
  3. Choose Manual Entry and input the new IP.
  4. Enter credentials and tap Connect.

Alternatively, scan the camera’s QR code if it’s still visible. The app will auto-detect the new IP if on the same network.

Best Practices for Managing IP Addresses

To avoid future headaches:

  • Document all device IPs in a notebook or spreadsheet.
  • Use consistent naming (e.g., EDGERTRONIC-MAIN-192.168.1.110).
  • Reserve static IPs in your router for critical devices.
  • Update firewall rules whenever IPs change.

Conclusion: Stay Connected with Confidence

Changing the IP address on your Edgertronic camera is a simple yet powerful way to maintain control over your surveillance system. Whether you’re upgrading your network, avoiding conflicts, or improving security, a static IP ensures your camera remains accessible and reliable.

By following this guide—using either the web interface or mobile app—you’ve now mastered the process. Remember to always double-check your new IP, test connectivity, and document changes for future reference. With these steps, your Edgertronic camera will continue delivering crisp, uninterrupted footage for years to come.

Pro Tips for Smooth IP Management

Want even more control? Consider setting up DHCP reservations in your router. This assigns a fixed IP to your camera automatically, so you never have to do this manually again.

Also, keep your camera’s firmware updated. Newer versions often include improved network stability and easier IP management tools.

—