Changing the IP address on your Hikvision NVR in 2026 is quick and secure when using the built-in web interface or Hik-Connect app—simply log in, navigate to Network Settings, and update the IP manually or via DHCP. Always verify the new IP and subnet mask to prevent connection loss and ensure seamless integration with your surveillance system.

How to Change IP Address on Hikvision NVR in 2026 Updated Guide

Key Takeaways

• Access the NVR menu: Navigate to Configuration > Network to begin IP changes.
• Assign a static IP: Manually set a unique IP to avoid conflicts on your network.
• Match subnet masks: Ensure correct subnet settings for seamless connectivity.
• Restart the NVR: Apply changes by rebooting the device after configuration.
• Update connected devices: Re-link cameras and software with the new IP address.
• Use Hik-Connect: Leverage the app for remote IP management and monitoring.
• Document changes: Record new IPs for future troubleshooting and network audits.

Why This Matters / Understanding the Problem

Imagine you’re setting up a new office network. Everything’s connected—cameras, computers, printers—but suddenly your Hikvision NVR isn’t showing up on the network. You check the IP settings and realize it’s using an old address that clashes with your router. This is a common headache, especially when upgrading systems or integrating new devices.

Changing the IP address on your Hikvision NVR isn’t just about fixing connectivity issues. It’s about ensuring your security system works smoothly within your network environment. Whether you’re avoiding IP conflicts, setting up VLANs, or securing your surveillance system behind a firewall, knowing how to change IP address on Hikvision NVR in 2026 updated guide is essential.

Outdated IP configurations can lead to dropped camera feeds, remote access failures, or even vulnerabilities if your NVR is exposed to the wrong network segment. In 2026, with more smart buildings, cloud integrations, and hybrid networks, proper IP management is non-negotiable.

Did you know? Over 60% of NVR-related support tickets stem from incorrect IP settings. A simple change can prevent hours of troubleshooting and downtime.

This guide walks you through every step, from accessing the NVR to verifying the new IP, all while keeping your cameras online and your system secure. Whether you’re using a local monitor, web browser, or Hik-Connect app, this how to change IP address on Hikvision NVR in 2026 updated guide covers it all—no IT degree required.

What You Need

Before diving in, gather these tools and materials. Having them ready saves time and reduces errors.

• Hikvision NVR (any model: DS-7600, DS-8600, or newer)
• Ethernet cable (to connect NVR to your router/switch)
• Monitor and HDMI/VGA cable (for direct access) OR PC on the same network (for web access)
• Keyboard and mouse (if using a monitor)
• Access to your router’s admin panel (to check available IP ranges and avoid conflicts)
• Hik-Connect app (optional, for remote access verification)
• Notepad or digital note app (to jot down current IP, new IP, subnet, and gateway)

You don’t need special software—just your existing network setup and a few minutes. If your NVR is part of a larger system (e.g., multiple NVRs, VLANs, or cloud storage), make sure you understand your network layout first.

Pro Tip: Always document your current IP settings before making changes. If something goes wrong, you can revert quickly without factory resetting.

Step-by-Step Guide to How to Change IP Address on Hikvision NVR in 2026 Updated Guide

Step 1: Connect and Power On the NVR

Start by ensuring your Hikvision NVR is powered and connected to your network via an Ethernet cable. Plug one end into the NVR’s LAN port and the other into your router or switch.

If you’re using a monitor, connect it via HDMI or VGA, then plug in a USB keyboard and mouse. Power on the NVR. Wait for it to boot fully—this usually takes 1–2 minutes.

Once booted, the NVR will display the main menu. If you don’t have a monitor, skip to Step 2: Access via Web Browser—but first, you’ll need to know the current IP address. Use a network scanner (like Fing or Advanced IP Scanner) to find it.

Warning: Never unplug or restart the NVR mid-process. Doing so can corrupt the network configuration and require a factory reset.

Step 2: Log In to the NVR Interface

On the NVR’s main screen, click the Menu button (usually in the top-right or via right-click). Select Configuration or System.

Enter your username and password. The default is usually admin and 12345, but if you’ve changed it, use your custom credentials.

If you’ve forgotten the password, you may need to use the Hik-Connect app to reset it or perform a local reset using the NVR’s physical reset button (consult your model’s manual).

Once logged in, you’re in the configuration dashboard. This is where you’ll manage all system settings, including the network.

Real-life scenario: A user once couldn’t log in because Caps Lock was on—double-check your keyboard input!

Step 3: Navigate to Network Settings

In the main menu, go to System > Network > TCP/IP. This is the core section for IP configuration.

You’ll see a screen with several fields:

• IP Address – currently assigned to the NVR
• Subnet Mask – typically 255.255.255.0 for small networks
• Gateway – your router’s IP (e.g., 192.168.1.1)
• Preferred DNS – often set to the same as gateway or your ISP’s DNS

Take a screenshot or write down the current values. This is your backup plan if the new IP causes issues.

Pro Tip: If you’re on a large network, confirm the IP range with your IT team. You don’t want to assign an IP that’s already in use.

Step 4: Choose Between DHCP and Static IP

You now have two options: DHCP (automatic) or Static IP (manual).

Use DHCP if:

• You want the router to assign the IP automatically.
• You’re in a small home or office with simple networking.
• You don’t plan to access the NVR remotely often.

Use Static IP if:

• You need a fixed address for remote access, port forwarding, or integration with other systems.
• You’re setting up multiple NVRs and want to avoid conflicts.
• You’re using VLANs or advanced network segmentation.

For most users, static IP is recommended for stability and remote access. This guide focuses on setting a static IP, which is the core of the how to change IP address on Hikvision NVR in 2026 updated guide.

Step 5: Enter New Static IP Details

Uncheck the Obtain IP Address Automatically box (if using DHCP).

Now, manually enter:

• IP Address: Pick a number in your router’s range, but outside the DHCP pool. For example, if your router assigns 192.168.1.100–199, use 192.168.1.200.
• Subnet Mask: Usually 255.255.255.0 (match your router’s settings).
• Gateway: Your router’s IP (e.g., 192.168.1.1).
• DNS Server: Set to 8.8.8.8 (Google DNS) or your router’s IP for local resolution.

Double-check each field. A single typo can make your NVR unreachable.

Example for a typical home network:

• IP: 192.168.1.200
• Subnet: 255.255.255.0
• Gateway: 192.168.1.1
• DNS: 192.168.1.1 (or 8.8.8.8)

Warning: Never use 255 in any octet of the IP (e.g., 192.168.1.255)—this is a broadcast address and will cause network issues.

Step 6: Save and Apply the New Settings

Click Save or Apply at the bottom of the screen. The NVR will process the change—this may take 10–30 seconds.

You’ll see a confirmation message: “Network settings have been changed. Please reconnect.” This is normal.

Do not restart the NVR yet. Wait for the message to disappear. The NVR will automatically apply the new IP and maintain camera feeds.

If you’re using a monitor, the screen may flicker briefly—this is the NVR re-establishing its network connection.

Real-life scenario: A user clicked “Save” and immediately unplugged the NVR, thinking it needed a reboot. The result? A corrupted network config. Always wait for the confirmation.

Step 7: Verify the New IP Address

This is the most important step: test the new IP.

Method 1: Ping the NVR

• On your PC, open Command Prompt (Windows) or Terminal (Mac).
• Type: ping 192.168.1.200 (replace with your new IP).
• If you get replies, the NVR is online. If not, check the IP and cable.

Method 2: Access via Web Browser

• Open Chrome or Firefox.
• Type the new IP (e.g., http://192.168.1.200) into the address bar.
• You should see the Hikvision login page.

Method 3: Use SADP Tool (Hikvision’s Device Manager)

• Download SADP Tool from Hikvision’s site.
• Run it on a PC on the same network.
• It will scan and display all Hikvision devices, including your NVR with its new IP.

Once verified, your IP change is successful!

Step 8: Update Remote Access (Optional)

If you use Hik-Connect or iVMS-4500 apps for remote viewing, you’ll need to update the NVR’s address in your app.

Open the app, go to Device List, and edit the NVR entry. Change the IP to your new static address. Save and reconnect.

For port forwarding (if accessing via public IP), update your router’s port forwarding rules to point to the new IP (e.g., port 8000 → 192.168.1.200).

Pro Tip: Use a dynamic DNS (DDNS) service if your public IP changes often. Hikvision supports DDNS setup under Network > Advanced > DDNS.

Step 9: Restart the NVR (If Needed)

In most cases, the NVR restarts its network stack automatically after saving. But if:

• The cameras disconnect,
• The web interface won’t load,
• Or the SADP tool doesn’t detect the NVR,

then perform a soft restart:

• Go to System > Maintenance > Reboot.
• Click Reboot and wait for the NVR to power cycle.

After restart, verify the IP again. All cameras should reconnect automatically.

Step 10: Document and Secure Your Settings

Create a simple network map or spreadsheet with:

• NVR IP, gateway, DNS
• Camera IPs (if static)
• Port numbers used (e.g., 80, 8000, 554)
• Hik-Connect device ID

Store this in a secure, accessible place (e.g., encrypted file or physical logbook).

Also, consider:

• Changing the default admin password.
• Enabling HTTPS for web access.
• Setting up a firewall rule to block external access unless needed.

These steps ensure your how to change IP address on Hikvision NVR in 2026 updated guide leads to a secure, reliable setup.

Pro Tips & Common Mistakes to Avoid

Even experienced users make small mistakes that cause big problems. Here’s how to avoid them.

Pro Tip #1: Always use a static IP for NVRs in professional or remote-access setups. DHCP can assign a new IP after a reboot, breaking remote connections.

Common Mistake #1: Ignoring the DHCP Pool
Using an IP that’s in your router’s DHCP range (e.g., 192.168.1.150 when the pool is 100–200) can cause IP conflicts. Always pick an IP outside the DHCP range.

Pro Tip #2: Use Consistent IP Schemes
For multiple NVRs, use a pattern like 192.168.1.201, 192.168.1.202, etc. This makes troubleshooting easier.

Common Mistake #2: Forgetting the Gateway
If the gateway is wrong, the NVR can’t reach the internet or other subnets. Double-check it matches your router’s IP.

Pro Tip #3: Test Before Leaving
After changing the IP, spend 5 minutes testing:

• Can you access the web interface?
• Do all cameras show live video?
• Can you log in remotely (if enabled)?

Don’t assume—verify.

Common Mistake #3: Not Updating Remote Tools
If you use Hik-Connect, SADP, or iVMS-4500, they cache old IPs. Update them manually after an IP change.

Pro Tip #4: Use SADP as a Lifesaver
If you lose access, SADP Tool can find your NVR even if you don’t know the IP. It uses multicast discovery—works like magic.

FAQs About How to Change IP Address on Hikvision NVR in 2026 Updated Guide

Q1: Can I change the IP without a monitor?
Yes! Use SADP Tool on a PC on the same network. It shows all Hikvision devices, lets you change IPs, and even reset passwords. No monitor needed. This is a key part of the how to change IP address on Hikvision NVR in 2026 updated guide for headless setups.

Q2: What if I can’t access the NVR after changing the IP?
First, check your PC’s network. Are you on the same subnet? Try ping 192.168.1.200. If it fails, reconnect your PC to the network, or use SADP to find the NVR. If the IP changed but SADP shows it, you might have a routing issue.

Q3: Does changing the IP affect recorded footage?
No. Your recordings are stored on the NVR’s hard drive and aren’t tied to the IP address. As long as the NVR powers on and the cameras stay connected, your footage is safe.

Q4: Can I use the same IP for multiple NVRs?
Absolutely not. IP conflicts will cause one or both NVRs to lose connectivity. Each device on a network must have a unique IP address. Use different subnets (e.g., 192.168.1.x and 192.168.2.x) if needed.

Q5: Is it safe to change the IP on a live system?
Yes, but do it during low-traffic hours. The NVR briefly disconnects from the network during the change, which may drop camera feeds for a few seconds. Avoid doing it during critical monitoring times.

Q6: How do I find my router’s IP address?
On Windows: Open Command Prompt and type ipconfig. Look for “Default Gateway.” On Mac: Open Terminal and type netstat -nr | grep default. This is essential for setting the correct gateway in your NVR.

Q7: What if my NVR has multiple network interfaces?
Some high-end models (like DS-96000) have dual LAN ports. You can set different IPs for each interface—one for cameras, one for remote access. Go to Network > Network Interface and configure each separately. Useful for network segmentation and security.

Final Thoughts

Changing the IP address on your Hikvision NVR doesn’t have to be intimidating. With the right tools and this how to change IP address on Hikvision NVR in 2026 updated guide, you can do it confidently—whether you’re upgrading your home security system or managing a commercial surveillance network.

Remember: plan your IP scheme, document everything, and always test after making changes. A static IP gives you stability, while proper configuration keeps your system secure and accessible.

Don’t forget to update your remote access tools and consider using SADP for future troubleshooting. In 2026, with more devices and smarter networks, a well-configured NVR is your best defense against connectivity issues and security gaps.

Now that you know how to change IP address on Hikvision NVR in 2026, go ahead and make the change—your system will thank you.

Next Steps:

• Download the SADP Tool and scan your network.
• Update your Hik-Connect app with the new IP.
• Schedule a quarterly network check to ensure all devices are properly configured.

Stay connected, stay secure.