How to Change Ip Camera Ip Address Hikvision

How to Change Ip Camera Ip Address Hikvision

by

Changing the IP camera IP address Hikvision is essential when reconfiguring your surveillance system or resolving network conflicts. This guide walks you through every step—from accessing the camera via its default IP to updating the address using the Hikvision Smart PSS software or web interface. You’ll also learn how to avoid common pitfalls and ensure seamless connectivity across your network.

Quick Answers to Common Questions

Can I use any IP address for my Hikvision camera?

No, the IP must be within your network’s range and not conflict with other devices. Avoid reserved ranges like .1 (router) or .254 (broadcast). Stick to unused addresses in the .2–.200 range for flexibility.

What if I forget the camera’s password after changing the IP?

Perform a factory reset by holding the reset button on the camera for 10–15 seconds until the status light blinks. After reboot, use default login (admin/admin).

Do I need special software to change the IP?

While you can do it via web browser, Hikvision Smart PSS or iVMS-4200 makes the process faster and less error-prone, especially with multiple cameras.

Will changing the IP affect recorded footage?

No. Recorded footage stored locally or on NVR remains intact. Only network access changes—live view and remote streaming will use the new IP.

Can I access the camera remotely after changing the IP?

Yes, but only if you’ve set up port forwarding or used Hikvision’s cloud service (HiDDNS). Update your DDNS hostname in the camera settings to reflect the new IP.

How to Change IP Camera IP Address Hikvision: A Complete Step-by-Step Guide

If you’re managing a network of Hikvision IP cameras, chances are at some point you’ll need to change the IP address of one or more devices. Whether it’s due to a network conflict, reconfiguration after installation, or simply organizing your surveillance system better, knowing how to change the IP camera IP address Hikvision is a vital skill for any security professional or home user.

This guide will walk you through everything you need to know—from locating your camera on the network to updating its IP settings safely and efficiently. No technical jargon overload here—just clear, practical instructions that anyone can follow, even if you’re not tech-savvy.

Why Would You Need to Change a Hikvision Camera’s IP Address?

There are several common reasons why you might need to change your Hikvision camera’s IP address:

How to Change Ip Camera Ip Address Hikvision

Visual guide about How to Change Ip Camera Ip Address Hikvision

Image source: i.ytimg.com

  • IP Conflict: Two devices on the same network using the same IP cause connection issues.
  • Replacing Old Cameras: When upgrading from older models, you may want consistent IP addresses for easier management.
  • Network Reorganization: Moving cameras between VLANs or subnets often requires new IP assignments.
  • Troubleshooting Connectivity Issues: Sometimes, resetting or reassigning the IP resolves connection problems.
  • Security Reasons: Changing default credentials and IPs reduces exposure to unauthorized access.

Whatever your reason, doing it correctly ensures your cameras remain accessible and functional without downtime.

What You’ll Need Before Starting

Before diving into the steps, gather these essentials:

  • A computer connected to the same local network as your Hikvision camera.
  • Network scanning tool (e.g., Advanced IP Scanner, Angry IP Scanner, or Fing).
  • Hikvision Smart PSS or iVMS-4200 software installed on your PC.
  • Access to your router’s admin panel (to reserve or assign static IPs).
  • The camera’s default username and password (usually admin/admin).

Having these ready saves time and prevents frustration during the process.

Step 1: Locate Your Hikvision Camera on the Network

The first step in changing the IP camera IP address Hikvision is finding where it currently lives on your network. Most Hikvision cameras come with a default IP like 192.168.1.64 or 192.168.0.108, but this can vary depending on the model and firmware version.

Method 1: Use a Network Scanner

  1. Download and install a free network scanner such as Advanced IP Scanner.
  2. Open the software and click “Scan” to detect all devices on your network.
  3. Look for entries labeled “Hikvision,” “DS-2CD,” or similar. Note the IP address listed next to it.

This method is fast and reliable for most home and small business networks.

Method 2: Check Router DHCP List

  1. Log in to your router’s admin page (usually via http://192.168.1.1 or 192.168.0.1).
  2. Navigate to the “Connected Devices,” “DHCP Clients,” or “Device List” section.
  3. Find your camera by MAC address or device name (you can usually find the MAC on the camera label).

This helps confirm the active IP and whether it’s set to dynamic or static.

Step 2: Access the Camera via Web Browser

Once you have the current IP address, open a web browser (Chrome, Firefox, Edge) and type the IP into the address bar. Press Enter.

Login to the Camera Interface

  1. You’ll be prompted to enter a username and password.
  2. Default login is typically:
    • Username: admin
    • Password: admin
  3. If prompted for a new password, create one now—don’t skip this!

After logging in, you should see the camera’s live video feed or configuration menu.

Step 3: Navigate to Network Settings

In the camera’s web interface, look for a tab or menu labeled Configuration, Network, or Setup. Click on it.

Find TCP/IP or IPv4 Settings

  • Under Network settings, select TCP/IP or IPv4 Configuration.
  • You’ll see fields for:
    • IP Address
    • Subnet Mask
    • Default Gateway
    • DNS Server

These values determine how your camera communicates on the network.

Step 4: Change the IP Address

Now comes the main event—changing the actual IP address.

Recommended Steps:

  1. Choose a New IP: Select an unused IP address in the same subnet as your router (e.g., if your router is 192.168.1.1, pick something like 192.168.1.70).
  2. Set Subnet Mask: Typically 255.255.255.0 for home networks.
  3. Leave Default Gateway:** Usually your router’s IP (e.g., 192.168.1.1).
  4. Optional DNS:** You can leave as auto or set to your ISP’s DNS (e.g., 8.8.8.8).
  5. Save Changes: Click “Apply” or “Save.” The camera may reboot briefly.

⚠️ Important: Don’t disconnect your computer from the network while making changes. Doing so could lock you out.

Step 5: Verify the New IP Address

After saving, wait about 30 seconds for the camera to reconnect. Then:

  1. Close the current browser window.
  2. Open a new tab and enter the new IP address (e.g., http://192.168.1.70).
  3. Log in again with your credentials.
  4. Confirm you can see the live feed and access settings.

If successful, you’ve successfully changed the IP camera IP address Hikvision!

Alternative Method: Using Hikvision Smart PSS Software

For users managing multiple cameras, Hikvision’s Smart PSS software offers a graphical way to search and reconfigure devices.

Steps:

  1. Install and launch Hikvision Smart PSS.
  2. Click Search to detect cameras on the network.
  3. Right-click your camera in the list and choose Properties > Network.
  4. Edit the IP settings and click OK.
  5. Click Apply to save changes.

Smart PSS automatically detects changes and updates the connection, reducing manual entry errors.

How to Assign a Static IP via Router (Best Practice)

Instead of manually setting static IPs on each camera, many users prefer assigning them through the router. This prevents future conflicts and makes management easier.

Steps to Reserve IP in Router:

  1. Go to your router’s admin page.
  2. Find DHCP Reservation, Static Leases**, or **Address Assignment**.
  3. Locate your camera by MAC address.
  4. Assign a desired IP (e.g., 192.168.1.75).
  5. Save settings.

Your camera will always receive the same IP when it connects to the network.

Troubleshooting Common Issues

Even with careful steps, things don’t always go smoothly. Here’s how to fix common problems:

Problem: Can’t Access Camera After IP Change

Solution: Double-check the new IP address. Try pinging it from Command Prompt (ping 192.168.1.70). If no response, the camera may have failed to apply changes. Power cycle it and retry.

Problem: Wrong Username/Password

Solution: Reset the camera using the reset button (press and hold for 10+ seconds). Wait 60 seconds for reboot. Login with default credentials.

Problem: Camera Not Detected After Change

Solution: Confirm the new IP isn’t already in use. Scan the network again. Also, ensure your computer’s IP is in the same subnet (e.g., 192.168.1.x).

Best Practices for Managing Hikvision Camera IPs

  • Document All IPs: Keep a spreadsheet of each camera’s IP, location, and MAC address.
  • Use Consistent Ranges: Group cameras under logical subnets (e.g., 192.168.1.50–192.168.1.100).
  • Update Client Software: Always update iVMS-4200 or other apps with new IPs.
  • Enable HTTPS:** For remote access, configure SSL certificates and use secure protocols.
  • Regularly Audit Network: Periodically scan your network to spot rogue devices.

Conclusion: Mastering IP Camera Management

Changing the IP camera IP address Hikvision doesn’t have to be intimidating. With the right tools and a clear process, you can reconfigure your cameras quickly and safely. Whether you’re troubleshooting, expanding your system, or improving security, understanding this process empowers you to manage your surveillance network confidently.

Remember: always verify connections after making changes, keep backups of configurations, and never underestimate the value of documentation. By following the steps above, you’ll minimize downtime and maximize reliability—keeping your surveillance system running smoothly 24/7.

© 2026 Surveillance Guides • Built with