Changing the IP address of your Yi Dome Camera can help you avoid network conflicts, improve performance, or prepare for remote access. This guide walks you through the process using the Yi Home app, web interface, or router settings—no technical jargon, just clear steps anyone can follow.
Quick Answers to Common Questions
Tip/Question?
Answer: Yes, you can revert to DHCP later by toggling the static IP setting off. Just remember to note your previous IP in case you need it again.
Tip/Question?
Answer: Avoid IPs ending in .1 unless they’re assigned to your router. Numbers like .100 to .199 are safer for cameras and avoid conflicts.
Tip/Question?
Answer: Use tools like Fing (free network scanner) to detect all devices on your network and spot duplicate IP addresses quickly.
Tip/Question?
Answer: If your camera keeps losing connection, check for firmware updates in the Yi Home app—outdated software can cause networking bugs.
Tip/Question?
Answer: For best results, change the IP during low-traffic hours so you won’t miss critical motion alerts during the brief reboot period.
How to Change IP on Yi Dome Camera: Complete Step-by-Step Guide
Have you ever tried to view your Yi Dome Camera remotely only to find it’s unreachable? Or maybe two devices on your network are fighting over the same IP address, causing confusion and downtime. Don’t worry—this is a common issue, and the solution lies in changing your camera’s IP address. In this detailed guide, we’ll walk you through exactly how to change the IP on your Yi Dome Camera using simple, beginner-friendly steps. Whether you’re troubleshooting, setting up remote access, or just want more control over your network, this guide has you covered.
By the end of this article, you’ll understand not only how to change the IP but also why it matters, what tools you need, and how to avoid common pitfalls. We’ll cover methods using the Yi Home app, the camera’s web interface, and even your router. No technical experience required—just follow along, and you’ll have your camera back online and running smoothly in no time.
What Is an IP Address and Why Should You Care?
An IP address (Internet Protocol address) is like a digital mailing label for your Yi Dome Camera. It tells your network where to send data—whether it’s video footage, motion alerts, or remote viewing requests. Most home networks use something called DHCP (Dynamic Host Configuration Protocol), which automatically assigns IP addresses. But sometimes, this system causes conflicts: two devices get the same IP, or your camera gets a random address that changes every time you restart it.
This unpredictability makes it hard to connect to your camera consistently—especially when trying to set up remote access or integrate with smart home systems. That’s where changing to a static IP comes in. A static IP is a fixed address you choose manually, ensuring your camera always responds from the same spot on your network.
Before You Start: Gather Your Tools
Ready to get started? Here’s what you’ll need:
- A smartphone or tablet with the Yi Home app installed (available on iOS and Android)
- A computer with a web browser (Chrome, Firefox, Edge, etc.)
- Your Yi Dome Camera connected to power and Wi-Fi
- An Ethernet cable (optional but helpful during setup)
- Access to your router’s admin panel (usually via a web browser at 192.168.0.1 or 192.168.1.1)
If you don’t have the Yi Home app, download it from the App Store or Google Play. Make sure your phone and camera are on the same Wi-Fi network before beginning.
Method 1: Change IP Using the Yi Home App (Easiest Method)
The Yi Home app offers a user-friendly way to manage your camera’s network settings without diving into complex menus. This method works best if your camera is still accessible through the app.
Visual guide about How to Change Ip on Yi Dome Camera
Image source: bandai-a.akamaihd.net
Step 1: Open the Yi Home App and Locate Your Camera
Launch the Yi Home app on your phone. If prompted, log in using the same account linked to your camera. Once logged in, tap on your Yi Dome Camera from the main dashboard. You should see live video feed and status indicators.
Step 2: Access Device Settings
On the camera’s live view screen, look for a gear icon or “Settings” button—usually in the top-right corner. Tap it to open the device settings menu.
Step 3: Navigate to Network Configuration
In the settings menu, find and select “Network” or “Wi-Fi Settings.” Then tap on “Advanced Settings” or “LAN Settings.”
Step 4: Enable Static IP Mode
You’ll see an option labeled “Obtain IP Automatically” or “Use DHCP.” Toggle this OFF to switch to manual/static IP mode. Now you can enter a custom IP address.
Step 5: Enter New IP Details
Fill in the following fields:
- IP Address: Choose a number between 192.168.1.100 and 192.168.1.200 (avoid numbers already used by other devices)
- Subnet Mask: Usually
255.255.255.0 - Gateway: Your router’s IP (often 192.168.1.1)
- DNS Server: Use your ISP’s DNS or leave as default
Example: If your router is at 192.168.1.1, you might set the camera to 192.168.1.150.
Step 6: Save and Reconnect
Tap “Save” or “Apply.” The camera may disconnect briefly and reconnect with the new IP. Wait 30 seconds, then refresh the app. If successful, your camera will appear under its new address.
Method 2: Change IP via Web Browser (More Control)
If the Yi Home app doesn’t show advanced options, you can access your camera directly through its current IP address using a web browser. This method gives you full control over network settings.
Step 1: Find Your Camera’s Current IP
Open the Yi Home app again. Go to your camera’s settings > Network > Basic Info. Note down the current IP address listed there.
Step 2: Enter the IP in Your Browser
Open Chrome, Firefox, or Safari on your computer. Type the camera’s current IP into the address bar (e.g., http://192.168.1.105) and press Enter.
Step 3: Log Into the Camera’s Web Interface
You’ll be prompted for a username and password. If you haven’t changed them, defaults are often:
- Username: admin
- Password: admin or blank
After logging in, you’ll see the camera’s dashboard with live preview and controls.
Step 4: Go to Network Settings
Look for a tab labeled “Network“, “Setup“, or “Configuration.” Click it and select “TCP/IP” or “Static IP.”
Step 5: Disable DHCP and Set Static IP
Uncheck “Enable DHCP” or toggle it off. Now fill in:
- IP Address: Your chosen static IP (e.g., 192.168.1.150)
- Subnet Mask: 255.255.255.0
- Default Gateway: Router IP (e.g., 192.168.1.1)
- Primary DNS: 8.8.8.8 (Google DNS) or your ISP’s DNS
Step 6: Apply Changes and Test
Click “Apply” or “Save.” The page may reload. Disconnect and reconnect your camera’s Wi-Fi. After a minute, try accessing the new IP in your browser (e.g., http://192.168.1.150). If it loads, success!
Method 3: Assign IP via Router Settings (Best for Remote Access)
Instead of changing the camera’s internal IP, you can reserve a specific IP address for your Yi Dome Camera directly in your router. This ensures the camera always gets the same address, even after reboots. Plus, it simplifies remote access setup.
Step 1: Access Your Router’s Admin Panel
Type your router’s IP into a browser (common ones: 192.168.1.1, 192.168.0.1). Log in with your admin credentials (check the router label or manual if unsure).
Step 2: Find Connected Devices
Navigate to “Connected Devices“, “Device List“, or “DHCP Clients.” Look for your Yi Dome Camera in the list. It’ll usually show the device name and MAC address.
Step 3: Reserve an IP Address
Find your camera in the list, click “Reserve” or “Edit,” and assign a static IP (e.g., 192.168.1.150). Save the changes.
Step 4: Restart the Camera
Power cycle your Yi Dome Camera. When it reconnects, it should automatically take the reserved IP. Verify by checking the device list again or trying to access the new IP via browser.
Troubleshooting Common Issues
Even with careful steps, things don’t always go as planned. Here’s how to recover:
Camera Not Showing Up After IP Change
If your camera disappears after changing the IP, double-check the subnet mask and gateway. They must match your router’s settings exactly. Also, confirm no other device is using the new IP. Try pinging the address from another device to test connectivity.
Forgotten Login Credentials
If you can’t log into the camera’s web interface, reset it by holding the reset button (usually on the side) for 10–15 seconds. This restores factory settings, including the default password.
Can’t Access Router Admin Panel
Ensure your computer is on the same network. If you’re using a VPN or mobile hotspot, disconnect first. Try typing ipconfig (Windows) or ifconfig (Mac/Linux) in terminal to confirm your gateway IP.
Remote Access Still Not Working?
After assigning a static IP, you may need to set up port forwarding on your router. Forward external port 80 or 443 to your camera’s new IP. Consult your router’s manual for exact steps.
Tips for a Smooth IP Change Experience
- Always write down your old and new IP addresses before making changes.
- Use an Ethernet cable during setup to avoid Wi-Fi dropouts.
- Avoid IP ranges like .100–.200 if your router uses that block for other devices.
- Update firmware regularly—newer versions improve network stability.
- Label your camera on the router’s device list so you can identify it easily next time.
Conclusion: Take Control of Your Yi Dome Camera Network
Changing the IP address on your Yi Dome Camera isn’t just about fixing errors—it’s about gaining control. With a stable, predictable IP, you eliminate guesswork, reduce downtime, and unlock features like remote monitoring and smart home integration. Whether you use the Yi Home app, web interface, or router settings, the process is straightforward once you know where to look.
Remember: a static IP doesn’t cost extra, doesn’t require special hardware, and can be reversed if needed. So don’t let network confusion slow you down. Follow the steps above, stay calm if something goes wrong (we’ve got troubleshooting tips!), and enjoy seamless surveillance anytime, anywhere.