This guide walks you through changing the WiFi network on your Feit Floodlight Camera with clear, easy-to-follow steps. Whether you’ve moved, upgraded your router, or need to reconnect, we’ve got you covered with practical tips and troubleshooting advice.
Key Takeaways
- Preparation is key: Before changing your WiFi, ensure your new network is active, your phone is connected to it, and the Feit Electric app is updated.
- Use the Feit Electric app: All WiFi changes must be done through the official app—there’s no web portal or physical button reset option.
- Factory reset if needed: If the camera won’t reconnect, a factory reset may be required to clear old network settings.
- Check signal strength: Place the camera within strong WiFi range (ideally within 30 feet of the router) to avoid connection drops.
- 2.4 GHz network required: Feit Floodlight Cameras only work with 2.4 GHz WiFi networks—5 GHz is not supported.
- Keep firmware updated: Regular updates improve performance and fix connectivity bugs that could affect WiFi switching.
- Contact support if stuck: If troubleshooting fails, Feit’s customer support can guide you through advanced recovery steps.
How to Change WiFi on Feit Floodlight Camera
If you’ve recently changed your internet provider, upgraded your router, or moved your Feit Floodlight Camera to a new location, you’ll likely need to update its WiFi settings. The good news? It’s easier than you think—once you know the right steps. This comprehensive guide will walk you through the entire process of changing the WiFi network on your Feit Floodlight Camera, from preparation to final connection. Whether you’re a tech newbie or a seasoned smart home user, we’ll make sure your camera stays online and secure.
By the end of this guide, you’ll know exactly how to reconnect your Feit Floodlight Camera to a new WiFi network, troubleshoot common issues, and keep your outdoor security system running smoothly. Let’s get started.
Why You Might Need to Change Your WiFi Network
There are several common reasons why you might need to change the WiFi network on your Feit Floodlight Camera:
- Router upgrade: You’ve replaced your old router with a newer model and need to reconnect all your smart devices.
- Internet provider change: Switching from one ISP to another often means a new network name (SSID) and password.
- Moving to a new home: Your camera is installed at a new location with a different WiFi setup.
- Network optimization: You’ve created a dedicated IoT network for your smart devices and want to move the camera over.
- Security concerns: You suspect your network has been compromised and want to reset access for all connected devices.
No matter the reason, the process remains the same. The key is to follow each step carefully and avoid skipping ahead—especially when it comes to resetting the camera or reconnecting via the app.
What You’ll Need Before Starting
Before you begin changing the WiFi on your Feit Floodlight Camera, make sure you have the following:
- A smartphone or tablet: You’ll need a mobile device to run the Feit Electric app.
- The Feit Electric app installed: Download it from the Apple App Store or Google Play Store if you haven’t already.
- Your new WiFi network details: This includes the network name (SSID) and password. Make sure you know them exactly—case-sensitive and including any special characters.
- Access to the camera: You’ll need to be near the camera to press the setup button or perform a reset if necessary.
- A stable internet connection: Your phone should be connected to the new WiFi network you want the camera to use.
- Power to the camera: Ensure the floodlight camera is receiving power via its wired connection. It cannot be battery-powered.
Having these items ready will save you time and frustration during the setup process.
Step 1: Open the Feit Electric App
The Feit Electric app is the central hub for managing your floodlight camera. It’s where you’ll initiate the WiFi change process.
Launch the App
Open the Feit Electric app on your smartphone or tablet. If you’re not already logged in, enter your account credentials. If you don’t have an account, you’ll need to create one—this is free and only takes a minute.
Visual guide about How to Change Wifi on Feit Floodlight Camera
Image source: surveillanceguides.com
Check for Updates
Before proceeding, make sure the app is up to date. Outdated versions can cause connectivity issues or missing features. Go to your device’s app store and check for updates. Installing the latest version ensures compatibility with your camera’s firmware.
Ensure You’re on the Right Network
Confirm that your phone is connected to the new WiFi network you want the camera to use. This is critical—if your phone is on a different network, the app won’t be able to communicate with the camera during setup.
Step 2: Locate Your Camera in the App
Once the app is open and updated, you need to find your camera in the device list.
Navigate to Devices
Tap on the “Devices” tab at the bottom of the screen. This will show all smart devices linked to your account, including lights, plugs, and cameras.
Find Your Floodlight Camera
Look for your Feit Floodlight Camera in the list. It should appear with its name (e.g., “Front Door Camera” or “Backyard Light”). If you have multiple cameras, make sure you select the correct one.
Check Connection Status
Look at the status indicator next to the camera. A green dot or “Online” label means it’s currently connected. If it says “Offline,” the camera may already be disconnected from WiFi—this is normal if you’ve changed networks.
Step 3: Prepare the Camera for WiFi Reconfiguration
Before you can change the WiFi settings, the camera needs to be put into setup mode. This allows it to accept new network information.
Access the Camera’s Setup Button
Locate the small setup button on the back or side of the floodlight camera. It’s usually recessed and may require a paperclip or SIM tool to press. Refer to your camera’s manual if you’re unsure of its location.
Press and Hold the Setup Button
Press and hold the setup button for about 5–7 seconds. You’ll know it’s working when the camera’s LED light starts blinking rapidly—usually blue or white. This indicates the camera is in pairing mode and ready to connect to a new network.
Wait for Confirmation
Release the button and wait for the LED to continue blinking. Do not press it again unless instructed. The camera will now broadcast a temporary WiFi signal that your phone can connect to during setup.
Step 4: Reconnect via the Feit Electric App
Now that the camera is in setup mode, return to the app to complete the WiFi change.
Return to the App
Go back to the Feit Electric app. The app should automatically detect that the camera is in pairing mode. If not, tap the “+” or “Add Device” button and select “Floodlight Camera” from the list.
Follow the On-Screen Prompts
The app will guide you through the reconnection process. It may ask you to confirm the camera model, location, and name. Fill in the details as needed.
Select Your New WiFi Network
When prompted, choose your new WiFi network from the list of available networks. Make sure you select the 2.4 GHz version—Feit cameras do not support 5 GHz networks. If your router broadcasts both bands under the same name, look for a network ending in “2.4G” or “_2.4”.
Enter the WiFi Password
Type in the password for your new network. Double-check for typos—even a single incorrect character will prevent connection. Use the “Show Password” option if available to verify.
Wait for Connection
The app will send the network credentials to the camera. This may take 30–60 seconds. During this time, the camera’s LED will continue blinking. Once connected, the light should turn solid or change color (often green or blue).
Step 5: Test the Connection
After the setup process, it’s important to verify that the camera is working properly on the new network.
Check Live View
In the app, tap on your camera to open the live feed. If you see a clear video stream, the connection is successful. If the screen is black or says “Connecting,” wait a few more seconds—sometimes it takes a moment to stabilize.
Test Motion Detection
Walk in front of the camera to trigger motion detection. The app should send a notification and start recording. This confirms that both video and alerts are functioning.
Verify Audio (if supported)
If your model supports two-way audio, tap the microphone icon and speak. You should hear your voice through the camera’s speaker. This ensures the microphone and speaker are working.
Check Recording Playback
Go to the “Events” or “Recordings” section in the app and review the latest clip. Make sure the timestamp and quality are correct.
What to Do If the Camera Won’t Connect
Sometimes, despite following all steps correctly, the camera may fail to connect to the new WiFi network. Here’s how to troubleshoot common issues.
Issue: Camera Not Appearing in App
If the app doesn’t detect the camera in pairing mode, try the following:
- Make sure the camera is powered on and the LED is blinking.
- Restart the app and try again.
- Move closer to the camera—WiFi signals can be weak during setup.
- Ensure your phone’s Bluetooth is on—some setup processes use Bluetooth for initial pairing.
Issue: Wrong Network Selected
If you accidentally selected the 5 GHz network or a neighbor’s WiFi, the camera won’t connect. Go back to the app, restart the setup process, and carefully choose the 2.4 GHz network. Look for network names that include “2.4” or check your router settings to confirm the correct SSID.
Issue: Incorrect Password
A wrong password is one of the most common causes of failure. Re-enter the password carefully, paying attention to uppercase letters, numbers, and symbols. If you’re unsure, log into your router’s admin panel to verify the WiFi password.
Issue: Weak Signal
If the camera is too far from the router, it may struggle to maintain a connection. Use a WiFi analyzer app to check signal strength at the camera’s location. Ideally, you should have at least 2–3 bars. If not, consider using a WiFi extender or relocating the router.
Issue: Camera Still Shows as Offline
If the camera remains offline after setup, try power cycling it:
- Turn off the power at the circuit breaker or switch.
- Wait 10 seconds.
- Turn the power back on.
- Wait 1–2 minutes for the camera to reboot and reconnect.
When to Perform a Factory Reset
If all else fails, a factory reset may be necessary. This clears all settings, including the old WiFi network, and returns the camera to its original state.
How to Factory Reset
To reset your Feit Floodlight Camera:
- Locate the setup button (same as before).
- Press and hold it for 10–15 seconds (longer than the pairing mode).
- The LED will flash rapidly, then turn off and back on.
- Release the button when the light stabilizes.
The camera is now reset and ready for a fresh setup.
Reconnect After Reset
Follow the same steps as above: open the app, put the camera in pairing mode, and reconnect to the new WiFi network. A factory reset often resolves stubborn connection issues caused by corrupted settings.
Tips for a Smooth WiFi Change
To make future WiFi changes easier, keep these best practices in mind:
- Label your networks: Use clear names like “Home_2.4G” and “Home_5G” to avoid confusion.
- Keep a password log: Store your WiFi passwords in a secure password manager.
- Update firmware regularly: Check the app periodically for camera updates—these can improve connectivity.
- Use a dedicated IoT network: Some routers allow you to create a separate network for smart devices. This can reduce interference and improve performance.
- Document your setup: Note the camera’s location, network name, and any special settings for future reference.
Maintaining Your Camera After WiFi Change
Once your camera is successfully connected to the new WiFi network, take a few steps to ensure long-term reliability:
- Monitor performance: Check the app daily for a few days to ensure the camera stays online.
- Review recordings: Confirm that motion events are being captured and saved.
- Test night vision: Turn off nearby lights and verify that the infrared LEDs activate properly.
- Clean the lens: Dust and dirt can affect video quality. Wipe the lens gently with a microfiber cloth.
- Check for obstructions: Make sure trees, bushes, or debris aren’t blocking the camera’s view or motion sensor.
Conclusion
Changing the WiFi network on your Feit Floodlight Camera doesn’t have to be complicated. With the right preparation and a clear step-by-step approach, you can reconnect your camera in under 10 minutes. Remember to use the Feit Electric app, ensure you’re on a 2.4 GHz network, and double-check your password. If you run into issues, a factory reset is often the quickest fix.
By following this guide, you’ll keep your outdoor security system running smoothly, no matter how many times your home network changes. Stay safe, stay connected, and enjoy the peace of mind that comes with a reliable smart floodlight camera.