How to Check Hikvision Camera Ip Address

How to Check Hikvision Camera Ip Address

by

Finding your Hikvision camera IP address is essential for setup, monitoring, and troubleshooting. This guide walks you through multiple methods—IP search tools, router DHCP lists, and direct camera access—so you can quickly locate your camera on any network. Whether you’re a beginner or tech-savvy, these steps ensure accurate and secure access.

Quick Answers to Common Questions

Tip/Question?

Answer: Yes, you can use Angry IP Scanner or Advanced IP Scanner to find your Hikvision camera’s IP without installing Hikvision software. These tools scan your network and list all devices, including cameras, by IP address and manufacturer.

Tip/Question?

Answer: To assign a static IP, log into your Hikvision camera via its current IP, go to Network > Basic Settings > TCP/IP, and manually enter an unused IP within your router’s range (e.g., 192.168.1.150). Save the settings to prevent future changes.

Tip/Question?

Answer: The default login for most Hikvision cameras is username: admin, password: admin or password. Always change this immediately after setup for security.

Tip/Question?

Answer: If your camera disappears from scans, check if it’s powered on and connected to the network. Also, ensure your scanning tool is set to the correct IP range (e.g., 192.168.1.1–192.168.1.254).

Tip/Question?

Answer: Yes, you can access your Hikvision camera remotely using its IP address, but only if port forwarding is set up correctly on your router. For security, use Hik-Connect or iVMS-4200 instead of exposing the IP publicly.

How to Check Hikvision Camera IP Address: A Complete Guide

Have you ever tried to access your Hikvision security camera but couldn’t remember its IP address? Or maybe the camera moved to a different location and now it’s offline? These are common issues that every homeowner or business owner using IP cameras will face. Knowing how to check your Hikvision camera’s IP address is not just helpful—it’s essential for smooth surveillance system operation.

In this comprehensive guide, we’ll walk you through multiple ways to find your Hikvision camera’s IP address using simple tools and techniques. Whether you’re setting up a new camera or troubleshooting an existing one, this step-by-step process ensures you stay in control of your security system. From using free software to checking your router settings, we’ve got you covered.

By the end of this article, you’ll know exactly how to locate your Hikvision camera’s IP address quickly and securely. Let’s dive in!

Why Do You Need to Know Your Hikvision Camera’s IP Address?

Your Hikvision camera uses an IP address to communicate over a network. Just like a home address helps deliver mail, an IP address allows your computer, smartphone, or NVR to “talk” to your camera. Without knowing the correct IP, you can’t view live feeds, configure settings, or update firmware.

How to Check Hikvision Camera Ip Address

Visual guide about How to Check Hikvision Camera Ip Address

Image source: nginx-sdx.xgsyun.com

There are several reasons why you might need to check your camera’s IP address:

  • Setting up the camera for the first time
  • Moving the camera to a new location on the network
  • Replacing a faulty camera and needing to reconnect
  • Troubleshooting connectivity issues
  • Updating camera firmware or changing network settings

Each of these situations requires you to identify the camera’s current IP address. The good news? There are multiple reliable methods to do this—no technical degree required.

Method 1: Use Hikvision’s Official Software (iVMS-4200 or Hik-Connect)

The easiest way to find your Hikvision camera’s IP address is by using the official Hikvision software. Both iVMS-4200 (for desktop) and Hik-Connect (mobile app) automatically scan your network and display connected devices.

Step-by-Step: Using iVMS-4200

iVMS-4200 is a powerful desktop application designed specifically for managing Hikvision devices. It includes a built-in IP search tool that makes finding your camera effortless.

  1. Download and Install iVMS-4200

    2. Visit the official Hikvision website and download iVMS-4200. Install it on your Windows computer. Make sure your camera and computer are connected to the same local network.

  2. Launch the Application

    3. Open iVMS-4200 after installation. You may be prompted to create an account or log in—follow the instructions.

  3. Click “Device Management”

    4. On the main dashboard, click on Device Management from the left sidebar.

  4. Select “Search Device”

    5. Click the Search Device button. The software will scan your entire network for Hikvision cameras.

  5. View Results

    6. Once the scan completes, your camera(s) will appear in the list. Each entry shows the IP address, device name, status, and model number.

  6. Double-Click to Connect

    7. To verify, double-click your camera. If it connects successfully, you’ve found the right IP.

Step-by-Step: Using Hik-Connect (Mobile App)

If you prefer mobile access, Hik-Connect works great for both iOS and Android devices.

  1. Install Hik-Connect

    2. Download the app from the App Store or Google Play. Open it and sign in with your Hikvision account.

  2. Add Device Manually (If Not Auto-Detected)

    3. If your camera isn’t automatically listed, tap + Add Device. Choose Manual Add.

  3. Enter IP Information

    4. You’ll be asked for the IP address, port (usually 80), username, and password. If you don’t know the IP yet, skip this step.

  4. Scan Network

    5. Tap Network Search or Scan. The app will detect all active Hikvision devices on your network.

  5. Select Your Camera

    6. Choose your camera from the list. The app displays its IP, status, and signal strength.

Tip: Ensure your phone and camera are on the same Wi-Fi network for the scan to work.

Method 2: Use a Third-Party IP Scanner Tool

Not everyone wants to install Hikvision software. That’s where third-party IP scanner tools come in handy. These free programs scan your network and list all connected devices—including Hikvision cameras.

Recommended Tools:

  • Angry IP Scanner – Free, cross-platform, and user-friendly.
  • Advanced IP Scanner – Great for Windows users; includes remote control features.
  • Nmap – Advanced users only; powerful but complex.

How to Use Angry IP Scanner:

  1. Download and Install

    2. Go to angryip.org and download the version for your operating system. Install and launch it.

  2. Set Scan Range

    3. By default, Angry IP Scanner detects your local network range (e.g., 192.168.1.x). Click Start to begin scanning.

  3. Wait for Results

    4. After a few seconds, the tool lists all devices. Look for entries with manufacturer names like “HIKVISION” or device types like “Camera” or “IPC.”

  4. Identify Your Camera

    5. Note the IP address next to the matching entry. You can also try opening the IP in a web browser to confirm.

  5. Test Connection

    6. Type the IP into your browser (e.g., http://192.168.1.64) and press Enter. If the login page appears, you’ve found your camera.

Example: If your camera shows up as “HIKVISION IPC” with IP 192.168.1.100, enter http://192.168.1.100 in your browser. Use the default login (admin/admin or admin/password) to verify access.

Method 3: Check Your Router’s Admin Panel

Your router keeps a log of all devices connected to your network. By accessing your router’s admin page, you can see every device—including your Hikvision camera—and their assigned IP addresses.

Steps to Find Camera IP via Router:

  1. Find Your Router’s IP Address

    2. On Windows, open Command Prompt and type ipconfig. Look for “Default Gateway” under your active network connection. On Mac, go to System Settings > Network > Details > Router.

  2. Log Into Router Admin Page

    3. Type the gateway IP into your browser (e.g., 192.168.1.1). Enter your router’s username and password (check the manual if you’ve forgotten them).

  3. Navigate to Connected Devices

    4. Look for sections like:

    • Connected Devices
    • DHCP Client List
    • LAN Setup
    • Attached Devices

    Each shows a list of devices with IP, MAC address, and device name.

  4. Search for Hikvision or Camera

    5. Look for entries labeled “HIKVISION,” “Camera,” or similar. Note the IP address associated with it.

  5. Verify Access

    6. Copy the IP and paste it into your browser. If the camera login screen appears, you’ve found the correct address.

Pro Tip: Some routers allow you to block or rename devices. Rename your camera to something like “Front Door Camera” for easy identification.

Method 4: Access the Camera Directly via Browser

If you suspect your camera is still at its default IP address, you can try accessing it directly through a web browser. Most Hikvision cameras come with a factory-set IP.

Common Default IP Addresses:

  • 192.168.1.64
  • 192.168.0.64
  • 192.168.1.108

Steps to Access via Browser:

  1. Open Web Browser

    2. Launch Chrome, Firefox, or Edge on a device connected to the same network.

  2. Enter Default IP

    3. Type the suspected IP into the address bar (e.g., http://192.168.1.64) and press Enter.

  3. Login with Credentials

    4. Use the default username and password (often admin/admin or admin/password). If it works, you’ve found your camera.

  4. Change IP Address (Optional)

    5. Once logged in, navigate to Network > Basic Settings > TCP/IP. Assign a static IP outside the DHCP range to avoid future conflicts.

Warning: If you change the IP, make sure it doesn’t conflict with other devices on the network (e.g., avoid 192.168.1.100 if your printer already uses it).

Method 5: Use the Reset Button (Last Resort)

If you’ve exhausted all other options and still can’t find your camera’s IP, you may need to reset it. This restores factory settings, including the default IP.

How to Reset Your Hikvision Camera:

  1. Locate the Reset Button

    2. On most Hikvision cameras, the reset button is a small hole on the side or back. You’ll need a paperclip or pin to press it.

  2. Press and Hold

    3. Press and hold the button for about 10–15 seconds until the status light blinks rapidly.

  3. Wait for Reboot

    4. The camera will restart and return to factory settings. Its IP will revert to a default value (e.g., 192.168.1.64).

  4. Access the Camera

    5. Use the default IP in your browser to log in and reconfigure the camera with a new static IP.

Caution: Resetting erases all settings, including recording schedules and motion detection. Only do this if absolutely necessary.

Troubleshooting Common Issues

Even with the best methods, you might run into problems. Here’s how to solve them.

Issue 1: Camera Not Showing Up in Scans

  • Cause: Wrong network or firewall blocking traffic.
  • Fix: Ensure camera and computer are on the same network. Disable firewalls temporarily during scanning.

Issue 2: Can’t Access Camera After Finding IP

  • Cause: Incorrect login credentials or wrong port.
  • Fix: Double-check username/password. Try port 80 or 8000. Reset password via router if needed.

Issue 3: IP Address Changed After Reboot

  • Cause: DHCP server assigned a new IP.
  • Fix: Assign a static IP in the camera’s settings to prevent changes.

Issue 4: Multiple Cameras Found—Which Is Which?

  • Solution: Label each camera in the router or use iVMS-4200 to rename them. Check physical locations to match.

Best Practices for Managing Hikvision Camera IP Addresses

To avoid future confusion, follow these tips:

  • Assign Static IPs: Prevent IP changes by setting a fixed address in the camera’s network settings.
  • Document Everything: Keep a list of IPs, usernames, and passwords in a secure place.
  • Update Firmware Regularly: Ensures compatibility and security fixes.
  • Use Strong Passwords: Avoid default credentials to prevent hacking.
  • Enable HTTPS: Adds encryption when accessing the camera via browser.

Conclusion

Knowing how to check your Hikvision camera’s IP address is a fundamental skill for anyone managing a surveillance system. Whether you use Hikvision’s official tools, third-party scanners, or your router’s admin panel, the methods above give you multiple paths to success. With a little practice, you’ll never lose track of your camera again.

Remember: always keep your camera on a stable network, assign static IPs when possible, and update firmware regularly. These habits ensure your security system runs smoothly and securely.

Now that you’re equipped with the knowledge to find your Hikvision camera’s IP address, take control of your surveillance setup today. Your peace of mind starts with knowing exactly where your camera is—literally!