Configuring a static IP on your Hikvision DVR ensures a stable, reliable connection for remote access and surveillance management. This guide walks you through accessing the DVR’s network settings via the local interface or web browser, manually assigning a fixed IP address, subnet mask, and gateway to prevent disruptions caused by DHCP changes. Follow the 2026 best practices to enhance security and streamline integration with your network infrastructure.

How to Configure Static IP in Hikvision DVR 2026 Guide

Key Takeaways

• Access network settings: Navigate to Configuration > Network > Basic Settings to begin setup.
• Disable DHCP: Turn off DHCP to enable manual IP configuration.
• Assign static IP: Enter a unique IP within your network’s range.
• Set subnet mask: Use 255.255.255.0 unless your network requires otherwise.
• Configure gateway: Input your router’s IP for proper network routing.
• Save and reboot: Confirm changes and restart the DVR to apply settings.
• Verify connection: Test access via browser or Hik-Connect app after setup.

Why This Matters / Understanding the Problem

Ever tried to access your Hikvision DVR remotely, only to find it’s suddenly offline? Or maybe you’ve had to reset your network and lost access because the IP address changed. This is a common headache for home security users and small business owners alike.

The root cause? Your DVR is likely using a dynamic IP address—one that changes each time your router reboots or the lease refreshes. That’s where learning how to configure static IP in Hikvision DVR 2026 guide comes in. A static IP keeps your DVR at the same address forever, making remote access, port forwarding, and integration with other systems (like NVRs or mobile apps) much more reliable.

Whether you’re setting up a new system or fixing connectivity issues, assigning a static IP ensures your surveillance system stays online and accessible. This guide walks you through the process step by step, with real-world tips to avoid common pitfalls.

Pro Tip: A static IP is essential if you plan to access your DVR via Hik-Connect, iVMS-4200, or a web browser from outside your local network. Without it, you risk losing access after a router restart.

What You Need

Before diving into the setup, gather these tools and information. Don’t worry—most of them are already on hand.

• Hikvision DVR (2026 series or compatible) – Make sure it’s powered on and connected to your network.
• Monitor, keyboard, and mouse – You’ll need physical access to the DVR for initial setup (unless using a web interface).
• Network cable (Ethernet) – For stable, wired connection (Wi-Fi isn’t recommended for DVRs).
• Router login details – You’ll need admin access to check IP ranges and avoid conflicts.
• Computer or smartphone – To access the DVR’s web interface or Hik-Connect app.
• IP address range info – Know your router’s subnet (e.g., 192.168.1.x) and DHCP range (usually 192.168.1.100–199).

Optional but helpful: A notepad to jot down IP addresses, subnet masks, and gateway info—this prevents typos later.

Warning: Never assign a static IP within your router’s DHCP range. Doing so can cause IP conflicts and network outages. Always pick an address outside that range.

Step-by-Step Guide to How to Configure Static IP in Hikvision DVR 2026 Guide

This section breaks down the process into simple, actionable steps. Whether you’re using the DVR’s local interface or the web browser, we’ve got you covered.

Step 1: Connect Your DVR and Log In

Start by connecting your DVR to your router using an Ethernet cable. Power it on and wait for the system to boot up (about 1–2 minutes).

Attach a monitor, keyboard, and mouse to the DVR. At the login screen, enter your credentials. The default username is usually admin, and the default password is either 12345 or blank—check your model’s manual if unsure.

Once logged in, you’ll see the main menu. Navigate to Configuration > Network > General. This is where you’ll set the static IP.

Tip: If you’ve changed the default password and forgotten it, you may need to reset the DVR. Use the reset button (usually on the back) and reconfigure from scratch.

Step 2: Check Current Network Settings

Before changing anything, take note of your DVR’s current network info. This helps avoid errors and ensures compatibility.

In the Network > General menu, look for these fields:

• IP Address – Currently assigned by your router (e.g., 192.168.1.105)
• Subnet Mask – Usually 255.255.255.0
• Default Gateway – Your router’s IP (e.g., 192.168.1.1)
• Preferred DNS – Often the same as gateway, or 8.8.8.8 (Google DNS)

Write these down. You’ll need them to configure the static IP correctly.

Real-Life Scenario: A user once changed the gateway to 192.168.0.1 while their router was 192.168.1.1. Result? No internet access. Always double-check gateway and DNS.

Step 3: Choose a Static IP Address

Now, pick a new IP address for your DVR. It must:

• Be in the same subnet as your router (e.g., 192.168.1.x)
• Be outside your router’s DHCP range
• Be unused by any other device

For example, if your router assigns IPs from 192.168.1.100 to 192.168.1.150, choose something like 192.168.1.50.

Why? If two devices have the same IP, your network will glitch—cameras drop, remote access fails. Avoid this by picking a “safe” address.

Pro Tip: Use your router’s admin panel to check for used IPs. Log in (via 192.168.1.1 in a browser), go to Connected Devices, and see what’s already taken.

Step 4: Disable DHCP and Enter Static Settings

In the DVR’s Network > General menu, find the DHCP toggle. Switch it to OFF.

Now, manually enter the static IP information:

• IP Address: Your chosen static IP (e.g., 192.168.1.50)
• Subnet Mask: Same as before (255.255.255.0)
• Default Gateway: Your router’s IP (e.g., 192.168.1.1)
• Preferred DNS: Either your router’s IP or a public DNS like 8.8.8.8
• Alternate DNS (optional): 8.8.4.4 (Google’s backup)

Double-check every field. Typos here can break connectivity.

Warning: Never leave DHCP enabled if you’re setting a static IP. The DVR will ignore your manual settings and grab a new IP from the router, defeating the purpose.

Step 5: Save and Restart

Click Save or Apply to store your settings. The DVR will prompt you to restart the network interface.

After saving, wait 30–60 seconds. The DVR may disconnect briefly. This is normal.

Once reconnected, verify the new IP by:

• Going back to Configuration > Network > General – The IP should show your static address
• Pinging the IP from a computer (open Command Prompt, type ping 192.168.1.50)

If you get replies, the static IP is active.

Real-Life Fix: A user saved settings but forgot to restart. The IP stayed dynamic. Always restart after saving!

Step 6: Test Remote Access (Optional but Recommended)

To ensure everything works, test remote access:

• Hik-Connect App: Open the app, edit your device, and update the IP to the new static address
• Web Browser: Type http://192.168.1.50 (or your IP) into Chrome or Firefox
• iVMS-4200: Add the DVR with the static IP

If you can log in and view cameras, you’re golden.

Pro Tip: For remote access beyond your home network, set up port forwarding on your router. Use ports 80 (HTTP) and 443 (HTTPS), or the custom ports set in the DVR.

Step 7: Reserve the IP in Your Router (Extra Security)

For maximum reliability, reserve the static IP in your router. This prevents other devices from claiming it.

• Log into your router (e.g., 192.168.1.1)
• Go to LAN > DHCP Reservation or Address Reservation
• Find your DVR by MAC address (found in DVR’s network settings)
• Assign it the same static IP

Now, even if the DVR’s DHCP is accidentally re-enabled, the router will give it the correct IP.

Why It Matters: This adds a second layer of protection. If the DVR’s settings get reset, the router still knows which IP to assign.

Pro Tips & Common Mistakes to Avoid

Even with a solid guide, things can go wrong. Here are expert-backed tips and traps to dodge.

Use the Right Subnet

Your DVR, router, and all devices must be on the same subnet. If your router is 192.168.1.1, your DVR must be 192.168.1.x. A mismatch (e.g., 192.168.0.x) blocks communication.

Real-Life Fix: A user set the DVR to 10.0.0.50 while the router was 192.168.1.1. Result? No access. Always match subnets.

Don’t Skip the Restart

Saving settings isn’t enough. The DVR must restart its network interface to apply the static IP. Skipping this step leaves you with the old dynamic address.

Check for IP Conflicts

Before assigning a static IP, ensure no other device uses it. Use your router’s Connected Devices list or run a network scan with a tool like Advanced IP Scanner.

Warning: IP conflicts cause intermittent outages. If your DVR disconnects randomly, this is the first thing to check.

Document Your Settings

Write down your static IP, subnet, gateway, and DNS. Store it in a safe place (or a sticky note on the DVR). If you ever need to reset or troubleshoot, this saves hours.

Use a Wired Connection

Wi-Fi is unstable for DVRs. Use Ethernet for a rock-solid connection. If Wi-Fi is your only option, ensure strong signal and low interference.

Update Firmware First

Before configuring, update your DVR to the latest firmware. Older versions may have bugs in network settings. Go to Maintenance > Upgrade and follow Hikvision’s instructions.

Pro Tip: Firmware updates often improve security and fix IP assignment bugs. Always stay current.

FAQs About How to Configure Static IP in Hikvision DVR 2026 Guide

Got questions? These answers solve the most common issues users face.

Q1: Can I set a static IP without a monitor?

Yes, but it’s trickier. Use the Hik-Connect app or a web browser to access the DVR remotely. If the IP is already dynamic, find it via:

• Your router’s connected devices list
• Hikvision’s IP Config Tool (download from their website)

Once you know the IP, log in via browser and navigate to Configuration > Network > General to set the static IP.

Q2: What if I enter the wrong gateway?

The DVR won’t connect to the internet. You’ll see “No Internet” or “Offline” in Hik-Connect. Fix it by:

• Logging back in and correcting the gateway
• Restarting the DVR

If you can’t access the DVR, reset it and start over.

Q3: Is a static IP better than DHCP?

For DVRs, yes. DHCP changes the IP, breaking remote access. A static IP ensures consistency, especially for port forwarding and app connectivity. For temporary devices (like laptops), DHCP is fine.

Q4: Can I use the same static IP on multiple DVRs?

No. Each device needs a unique IP on the same network. Duplicate IPs cause conflicts and disconnections. Assign different addresses (e.g., 192.168.1.50, 192.168.1.51).

Q5: Why is my DVR still getting a dynamic IP?

Check:

• DHCP is disabled in the DVR
• You clicked Save and restarted
• The static IP is outside the router’s DHCP range
• The router isn’t overriding it (check DHCP reservation)

If all else fails, reset the DVR and try again.

Q6: How do I find my router’s IP address?

On Windows: Open Command Prompt, type ipconfig, and look for Default Gateway. On Mac: Go to System Preferences > Network > Advanced > TCP/IP.

Q7: Can I change the static IP later?

Yes. Just repeat the steps, but ensure the new IP is also outside the DHCP range and not used by another device. Update any remote access apps or port forwarding rules.

Final Thoughts

Configuring a static IP in your Hikvision DVR 2026 isn’t just about technical setup—it’s about peace of mind. No more “Why is my camera offline?” panics. No more fiddling with IP changes after a router reboot. By following this how to configure static IP in Hikvision DVR 2026 guide, you’ve locked in a stable, reliable connection.

Remember: Pick an IP outside your DHCP range, double-check every field, and restart after saving. For extra security, reserve the IP in your router. And if you run into issues, revisit the FAQs or check for IP conflicts.

Now that your DVR has a static IP, take the next step: set up remote access, enable motion detection alerts, or integrate with smart home systems. Your security setup is stronger than ever.

Got a tip or question? Share it in the comments—we’d love to hear how your setup went. And if this guide helped, pass it along to a friend who’s struggling with DVR connectivity. Happy monitoring!