Connecting an Ezviz camera to a Hikvision DVR in 2026 is seamless using ONVIF compatibility, ensuring cross-brand integration without complex setups. Simply enable ONVIF on both devices, add the camera via the DVR’s IP scan, and authenticate—no proprietary software or extra hardware needed.

How to Connect Ezviz Camera to Hikvision DVR in 2026

Key Takeaways

• Verify compatibility first: Ensure your Ezviz camera and Hikvision DVR support ONVIF or RTSP protocols.
• Use ONVIF profile: Add the Ezviz camera via ONVIF in the DVR’s network camera settings.
• Note default credentials: Use the camera’s default username and password for initial setup.
• Update firmware: Install the latest firmware on both devices to avoid connection issues.
• Configure IP settings: Assign a static IP to the camera for stable DVR recognition.
• Test stream settings: Adjust resolution and bitrate to match DVR input requirements.

Why This Matters / Understanding the Problem

You’ve got an Ezviz camera—maybe it’s a sleek outdoor model you use to monitor your backyard. And you’ve also got a Hikvision DVR, the brain of your home security system. But here’s the catch: they’re from different brands, and you’re wondering, “Can I connect them?”

The good news? Yes, you can. The how to connect Ezviz camera to Hikvision DVR in 2026 is not only possible, but it’s also easier than most people think—thanks to ONVIF, RTSP, and modern cross-brand compatibility. Whether you’re upgrading your setup or adding a new camera, integrating these two popular brands saves money and boosts your security coverage.

Many users face confusion because Ezviz and Hikvision, while both owned by parent company Hangzhou Hikvision Digital Technology, use slightly different software ecosystems. This guide cuts through the noise. We’ll walk you through every step, so you can avoid the headache of mismatched feeds, login loops, or failed network scans.

Whether you’re a homeowner, a small business owner, or a DIY tech enthusiast, learning how to connect Ezviz camera to Hikvision DVR in 2026 gives you more control, better footage, and a unified view of your property—without buying all new gear.

What You Need

Before you start, gather the right tools and settings. This isn’t rocket science, but skipping a step can cost you hours of troubleshooting.

• Ezviz camera (IP or Wi-Fi model) – Make sure it’s powered on and connected to your network.
• Hikvision DVR or NVR – Ensure it’s running firmware updated to at least 2024 or later (critical for ONVIF support).
• Network connection – Both devices must be on the same local network (LAN). Use Ethernet cables if possible for stability.
• Computer or smartphone – To access the Ezviz camera’s web interface or app.
• Ezviz app or web portal – Download the Ezviz Life app (iOS/Android) or log in at ezviz.com.
• Hikvision iVMS-4200 or web interface – For adding and managing cameras on the DVR. Alternatively, use the Hikvision mobile app or web browser.
• ONVIF or RTSP enabled – We’ll show you how to check and enable these protocols.
• Network details – Know your camera’s IP address, subnet mask, gateway, and port numbers (usually 80 or 8000).

Pro Tip: Use a network scanner like Angry IP Scanner or Advanced IP Scanner to find your Ezviz camera’s IP if you don’t know it. Just plug it in, wait a minute, then scan your network range (e.g., 192.168.1.1–254).

Step-by-Step Guide to How to Connect Ezviz Camera to Hikvision DVR in 2026

Step 1: Update Firmware on Both Devices

Start with the basics: outdated firmware is the #1 reason cross-brand setups fail. Even if your devices seem to work, a missing update can block ONVIF or RTSP access.

For your Ezviz camera, open the Ezviz Life app. Go to Device List > tap your camera > Device Details > Firmware Update. If an update is available, install it. Wait for the camera to reboot.

For your Hikvision DVR, log into the DVR’s web interface (type its IP in a browser) or use the iVMS-4200 software. Navigate to Maintenance > Upgrade. Check the Hikvision support site for the latest firmware version compatible with your model. Upload and install it.

Warning: Never power off devices during a firmware update. Wait until the progress bar completes and the system reboots.

This step ensures both devices speak the same “security language.” Without updated firmware, the how to connect Ezviz camera to Hikvision DVR in 2026 process may hit a dead end early.

Step 2: Connect Ezviz Camera to Your Network

Your camera must be on the same network as the DVR. If it’s Wi-Fi, use the Ezviz app to connect it to your router. For wired models, plug in an Ethernet cable.

Open the Ezviz Life app. Tap + Add Device > select your camera type. Follow the in-app instructions to connect to Wi-Fi or confirm wired connection.

Once added, go to Device Settings > Network and note down:

• IP Address (e.g., 192.168.1.105)
• Subnet Mask (usually 255.255.255.0)
• Gateway (your router’s IP, e.g., 192.168.1.1)

Pro Tip: Assign a static IP to your Ezviz camera to prevent it from changing. In the network settings, switch from DHCP to static and enter the IP, mask, and gateway manually. This avoids connection drops later.

Now, test the connection by opening a web browser and typing the camera’s IP. If you see the login page, you’re good to go.

Step 3: Enable ONVIF or RTSP on the Ezviz Camera

Hikvision DVRs use ONVIF (Open Network Video Interface Forum) or RTSP (Real-Time Streaming Protocol) to add third-party cameras. You need to enable one of these on your Ezviz camera.

Option A: Enable ONVIF (Recommended)

Log into your Ezviz camera’s web interface (via its IP in a browser). Default login is often admin + a password set during setup (or printed on the camera label).

Navigate to:

• Settings > Network > Advanced > ONVIF

Toggle ONVIF to “Enable”. Then click Add User and create a new ONVIF user:

• Username: onvifuser
• Password: Choose a strong one (e.g., Onvif2026!)
• User Level: Administrator

Save the settings. The camera will reboot briefly.

Option B: Enable RTSP (Alternative if ONVIF fails)

In the same web interface, go to:

• Settings > Network > Advanced > RTSP

Enable RTSP and note the RTSP Port (usually 554). Save changes.

Warning: Never use the default ONVIF/RTSP username and password. Hackers scan for these. Always create a custom user with a strong password.

Now your Ezviz camera is ready to “talk” to the Hikvision DVR. This is a key step in the how to connect Ezviz camera to Hikvision DVR in 2026 process.

Step 4: Add the Ezviz Camera to the Hikvision DVR

Now it’s time to bring the two together. You can do this via the DVR’s web interface or the iVMS-4200 software. We’ll cover both.

Method A: Using the Hikvision DVR Web Interface

Open a browser and type the DVR’s IP address (e.g., 192.168.1.100). Log in with your admin credentials.

Navigate to:

• Camera > Camera Management > Remote > Add

Fill in the fields:

• Camera Name: Ezviz Backyard
• Address Type: IP/Domain
• IP/Domain: [Your Ezviz camera’s IP, e.g., 192.168.1.105]
• Port: 80 (or 8000 if 80 doesn’t work)
• Protocol: ONVIF
• ONVIF Port: 80 (or 8000)
• Username: onvifuser (the one you created)
• Password: Onvif2026!

Click Test. If it says “Connection Successful,” hit Save.

Method B: Using iVMS-4200 Software

Open iVMS-4200 on your PC. Go to Device Management > Add > Manual Add.

Select IP/Domain and enter:

• IP Address: 192.168.1.105
• Port: 80
• Protocol: ONVIF
• Username: onvifuser
• Password: Onvif2026!

Click OK. The software will search and add the camera. Drag it into your desired channel.

Pro Tip: If the test fails, double-check the IP, port, and password. Also, ensure your firewall or router isn’t blocking port 80/8000. Temporarily disable Windows Defender firewall to test.

Step 5: Adjust Stream Settings for Best Performance

After adding, you might notice lag, low resolution, or audio issues. Fix this by tweaking the stream settings.

In the DVR interface, go to:

• Camera > Camera Management > select your Ezviz camera > Stream Type

Set:

• Main Stream (HD): For live viewing and recording (e.g., 1080p, 15fps)
• Sub Stream (SD): For mobile viewing or backup (e.g., 720p, 10fps)

Also check:

• Bitrate Type: VBR (Variable Bitrate) – better for motion scenes
• Video Encoding: H.264 (most compatible) or H.265 if both devices support it

Save changes. The DVR will re-establish the connection with optimized settings.

Warning: Don’t overload your DVR’s bandwidth. If you add multiple high-res cameras, reduce frame rate or resolution to avoid freezing.

This step ensures smooth playback and efficient storage—critical for the how to connect Ezviz camera to Hikvision DVR in 2026 goal of a seamless setup.

Step 6: Test and Verify the Connection

Now, test everything. Go to the live view on your DVR or in the iVMS-4200 software. You should see the Ezviz camera feed on its assigned channel.

Check:

• Video Quality: Clear, no stutter
• Audio (if available): Works in live and playback
• PTZ (if applicable): Can you pan/tilt/zoom from the DVR?
• Motion Detection: Set up a test event and verify recording

Also, try viewing from the Hik-Connect mobile app. Log in, go to your DVR, and tap the Ezviz camera channel. If it loads, you’ve succeeded.

Pro Tip: Use a flashlight to trigger motion detection and confirm alerts. This helps verify that your security system is fully functional.

If the feed is black or says “No Signal,” go back to Step 4 and recheck the IP, port, and credentials. Sometimes a simple typo breaks the connection.

Step 7: Secure and Optimize Your Setup

Don’t stop at connection—secure your system. Cybersecurity matters, especially when mixing brands.

• Change default passwords on both the Ezviz camera and Hikvision DVR.
• Disable UPnP on your router to prevent automatic port forwarding.
• Enable HTTPS on the DVR for encrypted remote access.
• Set up VLANs (advanced) to isolate security devices from your main network.
• Schedule firmware updates every 6 months.

Also, label your cameras clearly in the DVR interface (e.g., “Ezviz Front Door”) so you don’t get confused later.

Finally, run a backup of your DVR configuration. In iVMS-4200, go to Configuration > Backup. Save it to a USB drive or cloud.

Warning: Never expose your DVR to the public internet without a strong firewall and two-factor authentication. Hackers target open DVR ports.

Pro Tips & Common Mistakes to Avoid

Even with perfect instructions, things can go wrong. Here’s how to avoid the most common pitfalls.

• Mistake: Using the wrong port – Some Ezviz cameras use port 8000, not 80. Try both if connection fails.
• Mistake: Forgetting to reboot – After enabling ONVIF/RTSP, always reboot the camera.
• Mistake: Ignoring firewall settings – Windows Firewall or router rules can block DVR-camera communication. Temporarily disable to test.
• Mistake: Using Wi-Fi for critical cameras – Wi-Fi drops can cause missed recordings. Use Ethernet for reliable feeds.
• Mistake: Not testing mobile access – A setup that works on a monitor might fail on the Hik-Connect app. Always verify.

Pro Tip: Use a network cable tester to check your Ethernet cables. A bad cable can mimic a connection issue.

Another smart move? Document your setup. Write down:

• Camera IPs and names
• ONVIF/RTSP usernames and passwords
• DVR login details

Store this in a secure place (like a password manager). You’ll thank yourself when you need to troubleshoot or add more cameras later.

Remember, the how to connect Ezviz camera to Hikvision DVR in 2026 process isn’t just about plugging things in—it’s about building a reliable, long-term security system.

FAQs About How to Connect Ezviz Camera to Hikvision DVR in 2026

Can I connect any Ezviz camera to a Hikvision DVR?

Most modern Ezviz IP cameras (2018 and newer) support ONVIF, which works with Hikvision DVRs. Older models or Wi-Fi-only cameras without ONVIF may not be compatible. Check your camera’s specs or test it.

Do I need to use ONVIF, or can I use RTSP?

You can use either. ONVIF is better because it handles PTZ, audio, and metadata automatically. RTSP is a fallback if ONVIF fails. Use the RTSP URL: rtsp://[IP]:554/Streaming/Channels/101 (replace 101 with your channel number).

Why does the DVR say “No Signal” after adding the camera?

Common causes: wrong IP, port, or password; firewall blocking; camera not on the same network; or ONVIF not enabled. Double-check each step. Reboot both devices and try again.

Can I record Ezviz camera footage on the Hikvision DVR?

Yes! Once connected, the DVR treats the Ezviz camera like any other. Set recording schedules, motion detection, and storage rules in the DVR interface. Footage saves to the DVR’s hard drive.

Is it safe to mix brands like Ezviz and Hikvision?

Yes, as long as you secure the setup. Use strong passwords, update firmware, and avoid public IP exposure. ONVIF is an open standard, so it’s designed for cross-brand use.

What if my Ezviz camera is Wi-Fi only?

It can still work, but Wi-Fi is less stable than Ethernet. Ensure strong signal strength. Place the camera near the router or use a Wi-Fi extender. Avoid thick walls or metal objects.

Can I view the Ezviz camera on the Hik-Connect app?

Yes! Once added to the DVR, the camera appears in the Hik-Connect app under your DVR’s device list. You can view, playback, and get alerts—just like a native Hikvision camera.

Final Thoughts

You did it! You’ve successfully learned how to connect Ezviz camera to Hikvision DVR in 2026—and now your security system is smarter, more flexible, and more powerful.

No need to buy all new cameras just to match your DVR. With ONVIF, RTSP, and a few simple settings, you’ve unlocked cross-brand compatibility that gives you the best of both worlds.

Remember: update firmware, enable ONVIF, use static IPs, and secure your network. These habits keep your system running smoothly for years.

Now, go test your setup. Watch that live feed, trigger a motion alert, and feel the peace of mind that comes with a unified, reliable security system.

Got another camera to add? Use this same process. The how to connect Ezviz camera to Hikvision DVR in 2026 method scales—whether you’re securing a home, office, or warehouse.

Stay safe, stay smart, and keep your eyes on what matters.