To default a Wirepath IP Bullet Camera in 2026, locate the reset button (usually recessed) and hold it for 10–15 seconds until the LED flashes, signaling a successful factory reset. This erases all custom settings, including network configurations, restoring the camera to its original state for reconfiguration. Always verify power and physical access before starting to avoid interruptions during the process.

How to Default a Wirepath IP Bullet Camera in 2026

Key Takeaways

• Locate the reset button: Find the small pinhole on the camera housing.
• Use a paperclip: Insert it to press and hold the reset button.
• Hold for 10 seconds: Wait until the LED flashes to confirm reset.
• Wait for reboot: Allow 1-2 minutes for full system restart.
• Reconfigure settings: Set up IP address and credentials post-reset.
• Check firmware: Update to the latest version after defaulting.

Why This Matters / Understanding the Problem

Imagine this: you’re setting up your home security system, and suddenly your Wirepath IP Bullet Camera stops responding. Maybe it’s stuck on an old network, won’t connect to your app, or you just bought a used unit with unknown settings. That’s where knowing how to default a Wirepath IP Bullet Camera in 2026 becomes a game-changer.

Resetting your camera to factory settings erases all custom configurations—like saved Wi-Fi networks, passwords, and motion zones—and returns it to its original state. This is essential when troubleshooting, transferring ownership, or preparing for a fresh install. Whether you’re a homeowner, installer, or IT technician, mastering this process saves time, avoids frustration, and ensures your camera works reliably.

By 2026, Wirepath has updated firmware, added cloud integration, and improved security—but the core reset process remains simple if you know the right steps. In this guide, you’ll learn how to default a Wirepath IP Bullet Camera in 2026 safely, quickly, and without losing access to future setup.

Common reasons to reset include:

• Forgotten admin password
• Camera not connecting to the network
• Transferring the camera to a new owner
• Replacing an old router or network
• Firmware glitches or failed updates

Without a proper reset, your camera might stay in a loop of disconnection or remain inaccessible. That’s why this guide focuses on real-world scenarios and proven methods—no fluff, just actionable steps.

Note: A factory reset cannot be undone. Always double-check before proceeding, especially if the camera is still under warranty or part of a larger security system.

What You Need

Before you dive into resetting your Wirepath IP Bullet Camera, gather these tools and materials. Having everything ready ensures a smooth process and prevents interruptions.

• Wirepath IP Bullet Camera (any model from 2020–2026)
• Power source (PoE switch, PoE injector, or 12V DC power adapter)
• Ethernet cable (Cat5e or higher recommended)
• Paperclip or small pin (for reset button access)
• Computer or smartphone (to verify reset and reconfigure)
• Access to the camera’s local network (Wi-Fi or wired LAN)
• Latest version of the Wirepath app (iOS/Android) or web browser (Chrome, Firefox, Edge)

Optional but helpful:

• PoE tester (to confirm power delivery)
• Ladder or step stool (if camera is mounted high)
• Notebook or digital note app (to record new login details after reset)

Why these tools matter:

• The paperclip is essential—most Wirepath cameras have a recessed reset button.
• Using PoE (Power over Ethernet) simplifies setup and ensures stable power during reset.
• Having a computer or smartphone ready lets you immediately verify the reset and begin reconfiguration.
• The Wirepath app is updated in 2026 to support faster device discovery and secure onboarding.

Pro Tip: If you’re using a wireless-only setup, ensure your router supports 2.4 GHz (not 5 GHz) for initial camera discovery. Wirepath IP Bullet Cameras in 2026 still rely on 2.4 GHz for setup mode.

Step-by-Step Guide to How to Default a Wirepath IP Bullet Camera in 2026

Step 1: Power Down the Camera Safely

Before touching the reset button, turn off power to the camera. This prevents electrical issues and ensures the reset process starts clean.

If your camera uses:

• PoE switch: Unplug the Ethernet cable or disable the port in the switch settings.
• PoE injector: Unplug the injector from the wall outlet.
• 12V DC adapter: Unplug it from the wall or camera.

Wait at least 10 seconds after power-off. This allows the internal memory to clear and capacitors to discharge.

Why this matters: Starting the reset while powered on can corrupt firmware or leave the camera in a “half-reset” state. Always power down first.

Step 2: Locate the Reset Button

Most Wirepath IP Bullet Cameras have a recessed reset button on the back or side of the housing. It’s typically labeled “RST” or “Reset” and requires a pin to press.

Look for:

• A small hole (about 1–2 mm wide)
• Near the Ethernet port or power input
• Sometimes behind a rubber grommet (common on outdoor models)

Use a paperclip or small pin to gently insert into the hole. Don’t force it—there’s no need to push hard.

For models like the Wirepath WP-BT500 or WP-IPB4K, the reset button is on the left side, just below the mounting bracket. On the WP-IPB2026, it’s behind a rubber flap on the rear panel.

Warning: Avoid using metal tools that could scratch the housing or damage internal components. A plastic pin or bent paperclip is ideal.

Step 3: Press and Hold the Reset Button While Powering On

This is the core of how to default a Wirepath IP Bullet Camera in 2026. You must press and hold the reset button while restoring power.

1. Insert the paperclip into the reset hole and press gently to engage the button.
2. While holding it, plug in the power source (PoE or DC adapter).
3. Keep the button pressed for 15 to 20 seconds after power is restored.

You’ll know it’s working when:

• The camera’s LED changes color (often from red to blinking amber or green).
• You hear a faint “click” or internal relay sound (some models).
• The camera reboots twice—once during reset, once after completing it.

After 20 seconds, release the button. The camera will continue to boot up in factory default mode.

Pro Tip: If nothing happens, double-check your power source. A weak PoE switch or faulty cable can prevent the reset from starting.

Step 4: Wait for the Camera to Reboot and Enter Setup Mode

After releasing the reset button, the camera will:

• Power on fully (LED turns solid green or blue)
• Broadcast a temporary Wi-Fi network (e.g., “WP-Setup-XXXX”)
• Assign itself a default IP address (usually 192.168.1.100 or 192.168.0.100)

This process takes 1 to 3 minutes. Be patient—rushing can lead to missed setup windows.

If you’re using a wired connection, plug the Ethernet cable into your router or computer. The camera will appear on your network as “Wirepath-IPB-Default” in your router’s device list.

For wireless setups, your smartphone or tablet should detect the “WP-Setup” network. This is your gateway to reconfiguring the camera.

Note: The temporary Wi-Fi network disappears after 10 minutes of inactivity. If you miss it, power cycle the camera to restart the setup mode.

Step 5: Connect to the Camera via App or Web Interface

Now that the camera is in default mode, you can reconnect and reconfigure it. You have two options:

Option A: Use the Wirepath Mobile App (Recommended)

1. Download the Wirepath Security App (2026 version) from the App Store or Google Play.
2. Open the app and tap “Add New Device”.
3. Select “IP Bullet Camera” and follow the on-screen prompts.
4. When prompted, connect your phone to the “WP-Setup-XXXX” Wi-Fi network.
5. The app will detect the camera and guide you through Wi-Fi setup, password creation, and firmware updates.

Option B: Use a Web Browser (Advanced Users)

1. On your computer, open a browser (Chrome or Firefox).
2. Type the camera’s default IP into the address bar: http://192.168.1.100 (or http://192.168.0.100).
3. Log in with the default credentials:
   • Username: admin
   • Password: admin (or blank, depending on model)
4. Follow the web wizard to set up Wi-Fi, change the password, and update firmware.

Both methods are valid, but the app is faster and more user-friendly in 2026, with AI-powered troubleshooting and step-by-step visuals.

Pro Tip: Always change the default password during setup. Leaving it as “admin” is a major security risk.

Step 6: Reconfigure Your Camera Settings

After connecting, you’ll need to reconfigure your camera for your environment. Here’s what to set up:

• Wi-Fi or wired network: Enter your home network details.
• Time zone and NTP server: Ensures accurate timestamps.
• Motion detection zones: Customize areas to monitor (e.g., driveway, front door).
• Recording settings: Choose cloud, SD card, or NVR storage.
• Notifications: Set up email or push alerts for motion events.
• Firmware update: The app will prompt you to install the latest version.

Take your time—this is where the camera becomes truly useful. For example, if you’re using it for front porch monitoring, exclude the street from motion detection to reduce false alerts.

Save all changes and wait for the camera to reboot. It should now appear in your app with a custom name (e.g., “Front Door Cam”).

Step 7: Test and Verify the Reset

Don’t assume it worked until you test it. Here’s how to verify:

• Live view: Open the app and check if you see real-time footage.
• Motion test: Walk in front of the camera and confirm alerts are sent.
• Recording test: Trigger motion and check if video is saved to your chosen storage.
• Remote access: Try viewing the camera from outside your home network (e.g., using mobile data).

If everything works, you’ve successfully completed how to default a Wirepath IP Bullet Camera in 2026.

If not, repeat the reset or contact Wirepath support with your model number and firmware version.

Warning: If the camera still won’t connect, it may be bricked due to a failed firmware update. In that case, use the TFTP recovery method (see FAQ #5).

Pro Tips & Common Mistakes to Avoid

Even with clear steps, things can go wrong. Here are expert tips and pitfalls to avoid when resetting your Wirepath camera.

Use the Right Power Source

Never use a low-quality power adapter. Wirepath cameras require stable voltage (12V DC or 48V PoE). A weak adapter can cause:

• Reset failure
• Intermittent reboots
• Firmware corruption

Stick to PoE switches with at least 15.4W per port or use the official Wirepath 12V adapter.

Don’t Skip the 20-Second Hold

Some users press the reset button for only 5–10 seconds. This isn’t enough for the 2026 firmware to fully clear settings. Always hold for at least 15 seconds, preferably 20.

Avoid Wireless-Only Setup Without a Strong Signal

The “WP-Setup” network is weak and short-range. If you’re more than 10 feet away, the connection may drop. For best results:

• Bring your phone within 3–5 feet of the camera during setup.
• Turn off other Wi-Fi networks temporarily to reduce interference.

Label Your Camera After Reset

Once configured, rename the camera in the app (e.g., “Backyard Cam”) and write the new IP address and password somewhere safe. This helps during future troubleshooting.

Check for Firmware Updates Immediately

After reset, the camera may run outdated firmware. The 2026 models often have critical security patches. Always update before using the camera for surveillance.

Common Mistakes

• Forgetting to power down first – Leads to incomplete resets.
• Using the wrong IP address – Check your model’s manual for the default IP.
• Ignoring the setup mode timeout – The WP-Setup network disappears after 10 minutes.
• Not changing the default password – Leaves your system vulnerable to hacking.
• Resetting during a firmware update – Can permanently damage the camera.

Pro Tip: If you’re managing multiple cameras, reset them one at a time. This prevents confusion and ensures each gets the correct network settings.

FAQs About How to Default a Wirepath IP Bullet Camera in 2026

1. What if the reset button doesn’t work?

If pressing the reset button has no effect, try these fixes:

• Ensure the camera is fully powered off (wait 30 seconds).
• Use a different paperclip or pin—some buttons are stiff.
• Check for physical damage (e.g., corrosion, bent pins).
• Try a soft reset via the app (Settings > Device > Reset), but this only works if you can access the camera.

If none work, the reset circuit may be faulty. Contact Wirepath support or consider a TFTP recovery (see FAQ #5).

2. Can I reset the camera remotely?

No. The physical reset button must be pressed while powering on. There is no remote factory reset option for security reasons.

However, you can perform a soft reset through the app or web interface if you know the login. This clears settings but doesn’t fully restore firmware defaults.

3. Will resetting delete my SD card recordings?

Yes. A factory reset erases all data, including:

• Video clips on the SD card
• Motion event logs
• Custom settings and schedules

Back up your SD card before resetting. Use a card reader to save videos to your computer.

4. How do I find my camera’s IP address after reset?

After a factory reset, the camera uses one of these default IPs:

• 192.168.1.100
• 192.168.0.100
• 192.168.2.100

Check your router’s DHCP client list or use a network scanner like Fing (Android/iOS) to find it. The device name will appear as “Wirepath-IPB-Default” or similar.

5. What if the camera is bricked after a failed update?

If the camera won’t boot or respond, try TFTP recovery:

1. Connect the camera directly to a computer via Ethernet.
2. Set your computer’s IP to 192.168.1.2 (subnet 255.255.255.0).
3. Download the correct firmware from Wirepath’s website.
4. Use a TFTP client (e.g., Tftpd64) to upload the firmware while powering on the camera.

This method requires technical knowledge. Contact Wirepath support if you’re unsure.

6. Can I reset a camera without the reset button?

No. There is no software-only way to perform a full factory reset. The hardware button is required to trigger the bootloader and clear NVRAM.

However, if you can access the web interface, you can reset most settings (except network and password) via the “Restore Defaults” option.

7. Does the reset process change with different models?

The core process is the same for all Wirepath IP Bullet Cameras (2020–2026). Differences include:

• Reset button location (side vs. rear)
• Default IP address
• App onboarding flow (2026 models use QR code pairing)

Always refer to your model’s Quick Start Guide for model-specific details.

Final Thoughts

Learning how to default a Wirepath IP Bullet Camera in 2026 is a must-have skill for any security system owner. Whether you’re troubleshooting, upgrading, or handing off a camera, a factory reset gets you back to a clean slate—fast and reliably.

Remember: power down first, hold the reset button for 20 seconds, and use the Wirepath app for the smoothest setup. Avoid common mistakes like skipping the password change or ignoring firmware updates.

With this guide, you’re not just resetting a camera—you’re taking control of your home security. Keep these steps handy, share them with family or installers, and never let a “stuck” camera slow you down again.

Now go ahead—reset, reconfigure, and rest easy knowing your camera is ready for 2026 and beyond.