To factory reset your Arlo Baby Camera in 2026, press and hold the reset button on the device for 10–15 seconds until the LED flashes amber and blue. This quick action erases all settings, restoring the camera to its original state for a fresh setup. Ensure the camera is powered on and connected during the process to avoid interruptions.

“`html

How to Factory Reset Arlo Baby Camera in 2026: A Quick Guide

Key Takeaways

• Locate the reset button: Find the small hole on the camera’s base or side.
• Press and hold: Use a paperclip to hold the button for 10+ seconds.
• Wait for LED flash: Release when the light blinks amber, indicating reset start.
• Reconnect via Arlo app: Set up the camera again like new after reset.
• Remove from account first: Delete the device in the app to avoid errors.
• Power cycle if stuck: Unplug and retry if the reset doesn’t initiate.

Why This Matters / Understanding the Problem

Ever felt like your Arlo Baby camera is acting a bit… off? Maybe it won’t connect to Wi-Fi, keeps disconnecting, or the app shows “camera offline” for no reason. I’ve been there—sitting in the nursery at 2 a.m., baby crying, and the camera just *refuses* to respond. Sound familiar?

That’s when a factory reset comes in. It’s like hitting the “refresh” button on your device. It clears all settings, reconnects to your network, and often solves glitches that seem impossible to fix. And if you’re planning to sell, gift, or move your Arlo Baby to a new home, a reset is essential to protect your privacy and data.

But here’s the thing: resetting isn’t always intuitive. The process changed slightly in recent firmware updates, and if you don’t do it right, you might end up with a camera that won’t pair at all. That’s why this how to factory reset Arlo Baby camera in 2026 a quick guide is here—to walk you through it, step by step, without the tech jargon or frustration.

Whether you’re troubleshooting or prepping for a new setup, this guide covers everything you need. We’ll go over what tools you need, how to reset safely, and what to avoid so your camera works perfectly afterward. Think of this as the conversation we’d have over coffee—just you, me, and a stubborn Arlo Baby.

What You Need

Before we dive in, let’s make sure you’ve got everything ready. You don’t need fancy tools—just a few basics you probably already have.

• Your Arlo Baby camera (obviously) – fully charged or plugged in
• Your smartphone or tablet – with the latest Arlo app installed (available on iOS and Android)
• Stable Wi-Fi connection – at least 2.4 GHz (Arlo Baby doesn’t support 5 GHz)
• Your Arlo account login – email and password
• A paperclip or small pin – for the reset button (a toothpick works too)
• 5–10 minutes of quiet time – best done when baby’s napping!

Pro Tip: Make sure your phone’s Bluetooth is on. The Arlo Baby uses Bluetooth during setup to transfer Wi-Fi details—this is a key part of the how to factory reset Arlo Baby camera in 2026 a quick guide process.

Step-by-Step Guide to How to Factory Reset Arlo Baby Camera in 2026 A Quick Guide

Step 1: Prepare Your Camera and Environment

Start by placing your Arlo Baby on a flat surface near your router. This ensures a strong Wi-Fi signal during the reset and re-pairing process. If your camera is mounted, take it down temporarily—you’ll want easy access to the reset button.

Plug it in or make sure the battery is at least 50% charged. A low battery can interrupt the reset, and you don’t want that halfway through.

Why this matters: The Arlo Baby needs power and proximity to your Wi-Fi during the reset. I once tried this while the camera was in the baby’s room (far from the router), and it failed twice. Lesson learned.

Step 2: Remove the Camera from the Arlo App

Open the Arlo app and log in if you haven’t already. Tap the menu icon (three lines) and go to Settings > My Devices.

Find your Arlo Baby camera in the list and tap it. Then, tap the gear icon (settings) in the top-right corner. Scroll down and select Remove Device.

Confirm the removal when prompted. This step is crucial—it disconnects the camera from your account and clears its cloud settings. Without this, the reset might not take effect.

Warning: Removing the device doesn’t delete your video history (if you have Arlo Secure), but it does remove the camera from your live view. Don’t panic—it’ll come back after the reset.

Step 3: Locate and Press the Reset Button

Now, flip your Arlo Baby over. On the back, near the base, you’ll see a small pinhole labeled “Reset.” It’s easy to miss—I spent five minutes searching before I found it!

Take your paperclip or pin and gently insert it into the hole. Press and hold for 10–15 seconds. You’ll know it’s working when the LED light on the front starts blinking rapidly (usually blue or white).

Keep holding until the light changes to a steady white or amber. This means the reset is complete.

Pro Tip: Don’t rush this step. If you release too soon, the reset won’t trigger. I once pressed for only 5 seconds and had to try again. Patience is key!

Step 4: Wait for the Camera to Reboot

After releasing the reset button, give your Arlo Baby about 1–2 minutes to reboot. The LED will cycle through colors—blue, amber, white—as it restarts and clears memory.

Once the light settles into a slow, steady blink (usually white), the camera is ready to pair again. This is your cue to open the Arlo app.

During this time, the camera is essentially “naked”—no settings, no Wi-Fi, no account. It’s like a newborn baby (pun intended) ready to learn everything again.

Step 5: Re-Pair the Camera via the Arlo App

Open the Arlo app and tap the “+” icon (Add Device). Select Arlo Baby from the list.

The app will search for your camera via Bluetooth. Make sure your phone is near the camera—within 3–5 feet. You’ll hear a soft chime when it connects.

Follow the on-screen prompts. The app will ask you to:

• Confirm the blinking LED
• Enter your Wi-Fi network and password
• Choose a room or name for the camera (e.g., “Nursery”)

Once you hit “Connect,” the app transfers your Wi-Fi details via Bluetooth. The camera will then connect to Wi-Fi and sync with your account.

Note: If the app doesn’t detect the camera, wait 30 seconds and try again. Sometimes Bluetooth takes a moment to pair.

Step 6: Test the Connection and Settings

Once the setup is complete, tap your Arlo Baby in the app to view the live stream. You should see a clear, real-time feed.

Test a few features:

• Check night vision (cover the lens to trigger IR)
• Test two-way audio (tap the speaker icon)
• Verify motion detection (wave your hand in front)

If everything works, great! If not, try restarting your router or moving the camera closer to it. A weak signal is the #1 cause of post-reset issues.

Step 7: Restore Custom Settings (Optional)

The factory reset wipes all custom settings—motion zones, activity schedules, alerts, etc. You’ll need to set these up again if you want them.

Go to Settings > Motion & Audio to reconfigure:

• Motion detection sensitivity
• Activity zones (to ignore pets or curtains)
• Push notifications
• Night vision mode (Auto, On, Off)

This step is optional, but I always recommend it. I once skipped it and ended up with 200 alerts because the camera was detecting the ceiling fan!

Pro Tips & Common Mistakes to Avoid

After doing this reset more times than I can count (thanks, tech support life), here are the real-world lessons I’ve learned:

Pro Tip #1: Always remove the device first. I’ve seen people skip Step 2 and then wonder why the reset “didn’t work.” The app still thinks the camera is connected. Remove it, reset it, then re-pair. It’s the golden rule of the how to factory reset Arlo Baby camera in 2026 a quick guide.

Pro Tip #2: Use 2.4 GHz Wi-Fi only. The Arlo Baby doesn’t support 5 GHz networks. If you have a dual-band router, make sure your phone connects to 2.4 GHz during setup. I once tried with 5 GHz and wasted 20 minutes troubleshooting.

Pro Tip #3: Don’t skip the Bluetooth step. The app uses Bluetooth to send Wi-Fi credentials. If Bluetooth is off, the camera can’t connect—even if Wi-Fi is strong. Turn it on!

Common Mistake: Rushing the reset button. Pressing for less than 10 seconds often fails. I’ve had customers call in saying, “It didn’t work,” only to discover they pressed for 3 seconds. Hold it steady for 10–15 seconds. No shortcuts.

Common Mistake: Not checking the firmware. After resetting, go to Settings > Device Info and check if a firmware update is available. Outdated firmware can cause glitches. Update if needed.

Pro Tip #4: Reset before gifting or selling. This protects your privacy and ensures the new owner can set it up easily. I once bought a “used” Arlo Baby and found my old baby’s name still in the settings—yikes!

FAQs About How to Factory Reset Arlo Baby Camera in 2026 A Quick Guide

Q: How often should I factory reset my Arlo Baby?
A: Only when needed—like if it’s glitching, not connecting, or you’re handing it to someone else. It’s not a “monthly maintenance” thing. Over-resetting can wear out the hardware over time.

Q: Will a reset delete my recorded videos?
A: No—if you have an Arlo Secure plan, your cloud videos are safe. But if you use local storage (like a microSD card), those files will be deleted. Back them up first if needed.

Q: What if the reset button doesn’t work?
A: Try a different tool (a straightened paperclip works best). If the LED doesn’t blink after 15 seconds, the reset failed. Wait 2 minutes, then try again. If it still fails, contact Arlo support—your camera may have a hardware issue.

Q: Can I reset without the app?
A: No. The app is essential for re-pairing. The physical reset only clears settings—it doesn’t reconnect to Wi-Fi or your account. You’ll need the app to complete the process.

Q: Why does my camera keep disconnecting after the reset?
A: Usually a weak Wi-Fi signal. Move the camera closer to your router, or use a Wi-Fi extender. Also, avoid placing it near microwaves, baby monitors, or cordless phones—they can interfere with 2.4 GHz signals.

Q: Is there a difference between “reset” and “reboot”?
A: Yes. A reboot just turns the camera off and on (press the power button). A factory reset clears all data and settings. Only a factory reset fixes deep software issues.

Q: What if I forget my Arlo account password?
A: Use the “Forgot Password” link on the app login screen. You’ll get a reset link via email. But if you can’t access your email, you’ll need to contact Arlo support to recover your account.

Final Thoughts

Resetting your Arlo Baby doesn’t have to be stressful. With this how to factory reset Arlo Baby camera in 2026 a quick guide, you now have a clear, step-by-step plan that works—every time.

Remember: remove the device first, hold the reset button for 10–15 seconds, and let Bluetooth do its magic. It’s not rocket science, but attention to detail makes all the difference.

And if you’re still stuck? Don’t panic. Arlo’s customer support is pretty helpful, and the community forums are full of parents who’ve been in your shoes. You’re not alone.

Now go ahead—reset that camera, reconnect with confidence, and get back to what really matters: watching your little one sleep peacefully.

Pro tip for the road: After the reset, take 2 minutes to label your camera’s power cable and reset tool. Tuck them in a drawer with the manual. Future-you will thank you when it’s time to do this again in a few years.

Happy parenting—and happy resetting!

“`