Factory resetting your Conico wireless IP camera restores it to original settings and fixes common issues like connectivity problems or forgotten passwords. You can do this using the reset button on the device or through the mobile app. A reset clears all configurations and prepares the camera for a new setup—perfect for troubleshooting or preparing for sale.
Quick Answers to Common Questions
Can I reset my Conico camera without the app?
Yes! Most models allow a full factory reset using only the physical reset button and a paperclip. The app method is optional and only works if the camera is still online.
How long does a factory reset take?
About 5–10 seconds to press the button, plus 2–3 minutes for the camera to reboot and reconnect. Total time: roughly 3–5 minutes.
Will resetting delete my recorded videos?
Yes. All local and cloud-stored footage is erased during a factory reset. Backup critical clips before proceeding.
Do I need internet during the reset?
Not for the reset itself—but you’ll need Wi-Fi access afterward to set up the camera again. Make sure your network is active.
My camera still won’t connect after reset—what now?
Try moving closer to your router, ensure 2.4 GHz Wi-Fi is enabled, or test with another device. If nothing works, contact Conico support with your model number.
How to Factory Reset Conico Wireless IP Camera: Complete Step-by-Step Guide
If your Conico wireless IP camera is acting up—frozen, disconnected, or stuck on a password screen—a factory reset might be the solution. Whether you’ve forgotten your login details, are experiencing network issues, or simply want to start fresh, knowing how to properly reset your Conico camera ensures a clean slate. This comprehensive guide walks you through every method to restore your device to its original settings, with clear steps, tips, and troubleshooting advice.
This article is perfect for homeowners, renters, or tech beginners who own a Conico wireless security camera. You’ll learn both physical and software-based reset options, understand when to use each method, and avoid common pitfalls. By the end, you’ll confidently restore your camera and get it back online in minutes.
Why Factory Reset Your Conico Wireless IP Camera?
A factory reset erases all custom settings on your Conico camera, returning it to the state it was in when first purchased. This includes Wi-Fi network names, login credentials, motion detection zones, recording schedules, and any linked cloud storage accounts. It’s a powerful tool for solving stubborn issues.
Common reasons to reset include:
- Forgotten Password: If you can’t log into the app or web interface, a reset unlocks full access.
- Connection Problems: The camera won’t connect to Wi-Fi or drops signal frequently.
- Software Glitches: Frozen interface, unresponsive buttons, or error messages that won’t clear.
- Preparing for Sale or Sharing: Remove personal data before passing the device to someone else.
- After Firmware Update Failures: Sometimes updates cause instability—resetting can fix lingering bugs.
While a reset solves many problems, it also means starting over. Make sure you have your camera’s model number and original packaging nearby, as you may need them for reconfiguration.
What You’ll Need Before Starting
Before diving into the reset process, gather these items:
- A small paperclip, toothpick, or the reset pin that came with your camera
- Your smartphone or tablet with the Conico app installed (usually “Conico Camera” or “IP Cam Viewer”)
- Access to your home Wi-Fi network name and password
- About 5–10 minutes of uninterrupted time
- The camera’s power adapter and USB cable (if hardwired)
Note: Do not unplug the camera during the reset unless instructed. Power interruption mid-reset can corrupt the system.
Step 1: Locate the Physical Reset Button
Most Conico wireless IP cameras come with a tiny reset hole near the bottom or side of the unit. It’s often labeled “RST” or just marked with a recessed button.
Tip: If you can’t find it, consult your user manual—or search online for “[Your Model Number] reset button location.”
Where to Find It
- On dome-style cameras: Look near the base or underside.
- On bullet cameras: Check the back or front housing.
- On indoor models: Often behind a removable faceplate or on the bottom edge.
The reset button is usually covered by a small rubber flap or directly exposed. It requires minimal pressure—just enough to trigger the internal circuit.
Step 2: Perform a Hard Reset Using the Reset Button
This is the most reliable method and works even if the camera is unresponsive or offline. Follow these steps carefully:
Step 2.1: Power On the Camera
Connect your Conico camera to power using the included adapter. Wait until the status light turns solid blue or green—this indicates it’s fully powered and ready for input.
Step 2.2: Press and Hold the Reset Button
- Insert a straightened paperclip or reset tool into the small hole.
- Press and hold the button for 10 to 15 seconds.
- You’ll see the status LED blink rapidly—then turn off and back on again.
Important: Holding for only 5 seconds may reboot the device but won’t trigger a full factory reset. Timing matters!
Step 2.3: Confirm the Reset
After releasing the button, wait 2–3 minutes. The camera will restart and reconnect to Wi-Fi automatically (if previously configured). The LED should show a steady connection light.
At this point, all previous settings are erased. The camera now acts like a brand-new device.
Alternative: Reset via the Conico Mobile App
If your camera is still connected to your network and accessible through the app, you can reset it remotely—no tools required.
Step 3.1: Open the Conico App
Launch the “Conico Camera” or similar app on your phone. Log in if prompted.
Step 3.2: Select Your Camera
Tap on the camera you want to reset. Ensure it shows a live video feed or status indicator.
Step 3.3: Access Settings
In the app menu, look for Settings, then tap Device Management or System Settings.
Step 3.4: Choose “Factory Reset”
Scroll down and select Restore Factory Settings. Confirm when prompted.
The app will send the command, and your camera will reboot automatically. This usually takes 1–2 minutes.
Note: Not all Conico models support remote reset. If the option isn’t available, use the physical button method instead.
Step 4: Reconnect and Reconfigure Your Camera
After a successful reset, your Conico camera is ready for a fresh setup. Follow these steps to get it running again:
Step 4.1: Power Cycle the Device
Unplug the camera for 10 seconds, then plug it back in. This ensures a clean boot.
Step 4.2: Download the Correct App
If you don’t already have it, download the official app from Google Play or the App Store. Search for “Conico Camera” or check the box for compatibility.
Step 4.3: Run the Setup Wizard
The app will detect your camera on the network. Tap “Add New Device” and follow the prompts.
Step 4.4: Enter Wi-Fi Credentials
Type your home Wi-Fi name (SSID) and password exactly as they appear on your router. Double-check for typos.
Step 4.5: Set Up User Accounts
Create a new username and password. Avoid using default credentials like “admin/admin.”
Step 4.6: Adjust Motion Detection & Alerts
Customize sensitivity, alert zones, and notification preferences in the app settings.
Once complete, test the camera by walking in front of it—you should receive a push notification if motion is detected.
Troubleshooting Common Reset Issues
Even experienced users run into snags. Here’s how to handle them:
Problem: Camera Doesn’t Respond to Reset Button
Solution: Try holding the button for 20 seconds. If still no response, check the power source—replace the adapter if necessary. Some models require simultaneous button presses (e.g., power + reset).
Problem: LED Blinks Red After Reset
Solution: This usually means Wi-Fi connection failed. Restart your router, ensure the 2.4 GHz band is enabled (Conico cameras don’t support 5 GHz), and retry setup.
Problem: App Can’t Find Camera After Reset
Solution: Make sure your phone and camera are on the same Wi-Fi network. Disable VPNs or firewalls temporarily during setup.
Problem: Forgotten Original Login Details
Solution: After reset, try logging in with the default credentials found on the device label or in the manual (often admin/password or blank fields).
Problem: Reset Doesn’t Fix Connectivity
Solution: Consider updating firmware via the app or manufacturer’s website. Outdated software causes many bugs.
Pro Tips for Smoother Resets and Setup
- Use 2.4 GHz Wi-Fi Only: Conico cameras typically don’t support 5 GHz networks. Check your router settings.
- Update Firmware First: Before resetting, visit the manufacturer’s site to download the latest firmware—it prevents future issues.
- Keep Notes During Setup: Write down your new login info and Wi-Fi password in a secure place.
- Test Before Finalizing: Walk around your property to confirm motion alerts work as expected.
- Label Your Camera: Add a sticker or note with the model and serial number for easy identification later.
When NOT to Factory Reset
While useful, a factory reset isn’t always the answer:
- If the camera powers on normally and functions well—don’t reset unnecessarily.
- If hardware damage is suspected (cracked lens, broken mount), contact support instead.
- If you’re unsure about reconfiguration steps, seek help from a friend or professional.
Conclusion: Get Back Online Fast
Restoring your Conico wireless IP camera to factory settings is a simple yet effective way to resolve performance issues and regain control. Whether you choose the physical reset button or the mobile app, the process resets all custom configurations and gives you a clean start. With this guide, you now know how to perform the reset safely, reconfigure your device, and avoid common mistakes.
Remember: always backup important footage before resetting, and keep your firmware updated. A well-maintained camera delivers reliable security and peace of mind. If problems persist after reset, reach out to Conico customer support with your model number and error details.
Now go ahead—your Conico camera is waiting for a fresh beginning!