How to Find Ip of Hikvision Camera

How to Find Ip of Hikvision Camera

by

Finding the IP address of a Hikvision camera is essential for viewing and managing your surveillance system. Whether you’re setting up a new camera or troubleshooting connectivity issues, this guide walks you through multiple reliable methods—including using the Hik-Connect app, network scanning tools, and the camera’s web interface. With clear steps and expert tips, you’ll have your camera online and accessible in no time.

Finding the IP address of your Hikvision camera is one of the first and most important steps when setting up or troubleshooting your surveillance system. Without knowing the camera’s IP address, you won’t be able to access its live feed, configure settings, or update firmware. Fortunately, there are several straightforward methods to locate it—whether you’re a beginner or an experienced user.

This comprehensive guide will walk you through every step of discovering your Hikvision camera’s IP address. From using built-in tools like the Hik-Connect app and SADP software to leveraging network scanners and router dashboards, we’ve got you covered. We’ll also share practical tips, troubleshooting advice, and answers to frequently asked questions so you can resolve any connectivity hiccups quickly.

No matter if your camera is wired or wireless, newly installed or already running, these techniques apply across most Hikvision models—including bullet, dome, PTZ, and thermal cameras. Let’s get started!

Quick Answers to Common Questions

Can I use my phone to find my Hikvision camera’s IP?

Yes! The Hik-Connect app automatically discovers nearby Hikvision cameras. While it may not always display the full IP, it confirms the device is online and helps verify connectivity.

What if my camera has a static IP?

If you’ve manually set a static IP, you can find it by checking the camera’s web interface under Network > Basic Settings, or by reviewing your router’s connected devices list.

Is SADP safe to use?

Absolutely. SADP is developed by Hikvision and is completely safe for scanning your local network. Just ensure you download it only from the official website.

Why won’t my camera show up in scans?

Common reasons include mismatched subnets, firewall blocking, or the camera being offline. Double-check network connections and try restarting both the camera and router.

Do I need special software to access the camera?

Nope. Most modern browsers support Hikvision’s web interface. However, some advanced features may require Hikvision’s iVMS-4200 client software for full functionality.

Why Do You Need to Know Your Camera’s IP Address?

Before diving into the “how,” let’s briefly cover the “why.” Knowing your Hikvision camera’s IP address is crucial because:

– It allows you to access the camera’s web interface for configuration.
– You can view real-time video feeds remotely via VMS (Video Management Software).
– Firmware updates require direct access to the camera.
– Remote monitoring through apps like Hik-Connect depends on correct network settings.
– Troubleshooting network-related issues becomes much easier with accurate device identification.

In short: without the right IP address, your camera may appear online but remain inaccessible.

Method 1: Use the Hik-Connect Mobile App

The Hik-Connect app is Hikvision’s official smartphone application designed for easy camera management. It’s available for both iOS and Android devices and offers automatic device discovery—making it one of the simplest ways to find your camera’s IP.

Step-by-Step Instructions

  1. Install the Hik-Connect App: Download it from the Apple App Store or Google Play Store.
  2. Create an Account: Open the app and sign up using your email or social media account.
  3. Add Your Camera: Tap the “+” icon and select “Add Device.” Choose “Smart Device” and follow the on-screen prompts.
  4. Connect to Camera: Ensure your phone is on the same Wi-Fi network as the camera. The app will search for nearby Hikvision devices.
  5. Review Detected Devices: Once found, the app displays the camera’s serial number and status. While it doesn’t always show the full IP address directly, it confirms the device is online and reachable.

Pro Tip

If you need the actual IP address after adding the camera via Hik-Connect, go to the device list, tap the info icon next to your camera, and look under “Device Information.” Some versions display the IP here.

How to Find Ip of Hikvision Camera

Visual guide about How to Find Ip of Hikvision Camera

Image source: thumbs.dreamstime.com

Method 2: Use Hikvision SADP Software

SADP (Search Active Devices Protocol) is Hikvision’s proprietary tool that scans your local network for active Hikvision devices. It’s free, lightweight, and highly effective.

How to Use SADP

  1. Download SADP: Visit Hikvision’s official SADP download page and install the software on your Windows PC.
  2. Run the Program: Launch SADP. Make sure your computer is connected to the same network as the camera.
  3. Scan Network: Click “Search” or press F5. The tool will list all detected Hikvision devices with their:
    • IP address
    • Port number
    • MAC address
    • Firmware version
  4. Access Camera Settings: Double-click any listed camera to open its web interface in your browser or use the “Modify IP” feature to change settings if needed.

Important Notes

  • SADP only works on Windows operating systems.
  • Ensure your PC isn’t using a different subnet than the camera (e.g., don’t mix 192.168.1.x with 10.0.0.x).
  • If no devices appear, check firewall settings—SADP may be blocked.

Method 3: Check Your Router’s Admin Page

Most home and office routers assign IP addresses dynamically via DHCP. By logging into your router, you can see a list of all connected devices—including your Hikvision camera.

Steps to Find Camera IP via Router

  1. Find Your Router’s IP: Open Command Prompt (Windows) or Terminal (Mac/Linux) and type ipconfig (Windows) or ifconfig (Mac/Linux). Note the “Default Gateway”—this is usually your router’s IP (e.g., 192.168.1.1).
  2. Log Into Router: Open a web browser and enter the router IP. Log in using your admin username and password (often found on the router label or in its manual).
  3. Navigate to Connected Devices: Look for sections labeled:
    • “Attached Devices”
    • “DHCP Client List”
    • “Network Map”
  4. Identify Your Camera: Scan the list for entries matching Hikvision brand names or MAC addresses starting with common OUI prefixes (e.g., 00-0D-7D, 00-04-4B).
  5. Record the IP: Write down the corresponding IP address for future use.

Example

If your camera shows up as “Hikvision-DomeCam” with IP 192.168.1.108, you can now access it by entering http://192.168.1.108 in your browser.

Method 4: Try Common Default IPs

Some older Hikvision models come preconfigured with default IP addresses. While less common today due to widespread DHCP usage, it’s still worth trying if other methods fail.

Common Default IPs

  • 192.168.1.64
  • 192.168.0.64
  • 192.168.1.108

How to Test Them

  1. Open your web browser.
  2. Type each IP into the address bar (e.g., http://192.168.1.64).
  3. Press Enter and see if the login page loads.
  4. If successful, log in using default credentials (often admin/admin or admin/12345).

⚠️ Warning: Never leave default passwords unchanged—they’re publicly known and pose serious security risks.

Method 5: Use Third-Party Network Scanners

If Hik-Connect or SADP don’t work, consider using trusted third-party network scanning tools. These are especially useful in larger networks or when multiple brands are present.

Recommended Tools

  • Advanced IP Scanner: Free, fast, and supports UPnP discovery.
  • Angry IP Scanner: Cross-platform and open-source.
  • Fing (Mobile/Desktop): User-friendly with visual interface.

Using Advanced IP Scanner

  1. Download and install from advanced-ip-scanner.com.
  2. Launch the program and click “Scan.”
  3. Wait for results—devices with open ports will appear.
  4. Look for services named “Hikvision” or ports like 80, 8000, or 554.
  5. Note the IP address and test access via browser.

Security Reminder

Only run trusted scanner software from reputable sources. Avoid pirated or unknown utilities that may contain malware.

Accessing the Camera’s Web Interface

Once you’ve located the IP address, accessing the camera’s settings is simple:

  1. Type the IP into your browser’s address bar (e.g., http://192.168.1.108).
  2. Log in using your username and password.
  3. Explore tabs like:
    • “Configuration”
    • “Network”
    • “System”

💡 Tip: Bookmark the IP address for quick future access.

Troubleshooting Common Issues

Even with the best tools, you might encounter problems. Here’s how to resolve them:

Issue 1: No Devices Found in SADP or Hik-Connect

  • Cause: Camera and computer are on different subnets.
  • Fix: Connect both to the same network segment. Disable guest networks or VLANs temporarily.

Issue 2: Camera Not Appearing in Router List

  • Cause: Static IP misconfiguration or DHCP exhaustion.
  • Fix: Reboot the camera and router. Assign a static IP manually if needed.

Issue 3: Can See Camera but Can’t Login

  • Cause: Incorrect credentials or locked account.
  • Fix: Reset the camera to factory defaults using the physical reset button (usually requires holding for 10 seconds).

Issue 4: Intermittent Connectivity

  • Cause: Weak signal (for Wi-Fi models) or cable issues.
  • Fix: Use Ethernet for stability. For wireless cameras, move closer to the router or add a repeater.

Best Practices for Managing Your Camera’s IP

To avoid future headaches:

– **Assign Static IPs**: Prevent DHCP changes by reserving IPs in your router or setting static addresses in the camera itself.
– **Document Everything**: Keep a spreadsheet or notebook with camera model, serial number, IP, and login details.
– **Update Firmware Regularly**: Security patches improve stability and detection reliability.
– **Use Strong Passwords**: Replace default logins immediately.
– **Enable HTTPS**: In the camera’s network settings, switch HTTP to HTTPS for encrypted access.

Conclusion

Finding the IP address of your Hikvision camera doesn’t have to be complicated. With tools like the Hik-Connect app, SADP software, router dashboards, and network scanners, you can quickly locate your device and begin configuring or viewing your surveillance system. Each method has its strengths—use the one that fits your setup best.

Remember: once you know the IP, you unlock full control over your camera. Stay secure, stay organized, and enjoy peace of mind with reliable monitoring.