Finding your Reolink camera IP address is essential for remote viewing and network configuration. This guide walks you through multiple methods—using your router, the Reolink app, or connecting directly via Ethernet—so you can access your camera quickly and securely. Whether you’re setting up a new system or troubleshooting connectivity, these simple steps ensure you always know where your camera lives on the network.
Quick Answers to Common Questions
Tip/Question?
Answer: Yes, but only if your router supports it. Assign a static IP based on the camera’s MAC address to prevent changes.
Tip/Question?
Answer: Usually admin/admin, but check the manual or label on the camera. Resetting restores defaults.
Tip/Question?
Answer: Port 80 for HTTP, 443 for HTTPS, and 554 for RTSP streaming. Allow these in your firewall.
Tip/Question?
Answer: Yes! Use tools like TinyCam Monitor or iVMS-4200 to view Reolink feeds with the IP and credentials.
Tip/Question?
Answer: Restart both devices, ensure cables are secure, and verify power. Sometimes a simple reboot fixes connectivity.
How to Find Reolink Camera IP Address: A Complete Guide
Are you trying to access your Reolink security camera remotely but don’t know its IP address? You’re not alone. Whether you’re setting up live viewing, configuring motion alerts, or adjusting recording settings, knowing your camera’s IP address is essential. Without it, you can’t connect to the camera from a web browser or third-party software.
This guide walks you through several reliable ways to find your Reolink camera’s IP address. From checking your router to using the Reolink app or scanning your network, we cover every method so you’ll never be left guessing again. No technical jargon—just clear, step-by-step instructions anyone can follow.
Why Do You Need the IP Address?
Your Reolink camera uses an IP address just like any other device on your home network—think of it as your camera’s home address. When you want to view the live feed from outside your local network (like from work or while traveling), you need this address to connect directly to the camera.
Visual guide about How to Find Reolink Camera Ip Address
Image source: syakosyoumei.jp
Additionally, if you’re using third-party software such as Blue Iris, Synology Surveillance Station, or even VLC media player to view the stream, you’ll need the correct IP and port number. That’s why knowing how to find the IP is a must for both beginners and advanced users.
Method 1: Find the IP Address Using Your Router
The most reliable way to find your Reolink camera’s IP address is by logging into your router’s admin panel. Since your camera is connected to your network, your router keeps track of all connected devices and their assigned IP addresses.
Step 1: Access Your Router’s Web Interface
Open a web browser (Chrome, Firefox, Safari, etc.) and type your router’s default gateway address into the address bar. Common addresses include:
- 192.168.1.1
- 192.168.0.1
- 192.168.2.1
If these don’t work, press Windows + R, type cmd, and hit Enter. In the Command Prompt, type ipconfig and look for “Default Gateway” under your active network adapter. Use that IP to log in.
Step 2: Log In to Your Router
Enter your router’s username and password. These are often printed on a sticker on the router itself. If you’ve changed them before and forgot, you may need to reset the router.
Step 3: Navigate to Connected Devices
Look for sections like:
- Device List
- Attached Devices
- DHCP Client List
- LAN > Device Management
Every brand labels this differently—check menus for keywords like “Devices,” “Clients,” or “Network Map.”
Step 4: Locate Your Reolink Camera
Scroll through the list and look for your camera. It will usually appear with a name like:
- Reolink_XXXX
- RLC-510A_ABC123
- Unknown Device
Match the MAC address (physical address) if possible. Reolink MAC addresses start with 00:1F:7A or 00:1F:AA.
Step 5: Note the Assigned IP Address
Once you’ve found your camera in the list, copy the IP address next to it. Write it down—this is your key to remote access.
Tip: Some routers allow you to assign a static IP to your camera, preventing it from changing over time. This is useful if you plan to access it frequently.
Method 2: Use the Reolink App to Find the IP Address
If you have the Reolink app installed on your smartphone or tablet, you can easily find the camera’s IP address without needing a computer.
Step 1: Open the Reolink App
Launch the app and log in with the same account used to set up your camera.
Step 2: Go to Device Settings
Tap on your camera’s name or icon to open its settings menu.
Step 3: Look for Network Information
Navigate to Settings > Device Information or Advanced Settings > Network. The IP address will be listed there.
Some newer models display the IP directly on the main device screen under Status.
Note: The app only shows the local IP address (e.g., 192.168.1.105). To access the camera remotely, you’ll also need to enable cloud access or set up port forwarding.
Method 3: Connect Directly to the Camera via Ethernet
If your camera isn’t showing up on your network or you suspect a Wi-Fi disconnect, try connecting it directly to your computer using an Ethernet cable.
Step 1: Connect the Camera to Your Computer
Plug one end of an Ethernet cable into your camera and the other into your laptop or desktop. Make sure your computer’s Wi-Fi is turned off.
Step 2: Set a Static IP on Your Computer
Go to your network settings and assign a static IP address in the same subnet as the camera. For example:
- IP: 192.168.1.100
- Subnet Mask: 255.255.255.0
- Gateway: 192.168.1.1
Step 3: Use Software to Scan for Devices
Download a free tool like Angry IP Scanner or Advanced IP Scanner. Run a scan of the 192.168.1.x range. The camera should appear as an active device with its IP.
Step 4: Access the Camera Web Interface
Open a browser and enter the found IP address. You should see the login page. Default credentials are usually admin / admin.
Once logged in, navigate to Settings > Network to confirm or change the IP settings.
Method 4: Use Reolink Client Software
Reolink offers a free desktop application called Reolink Client for Windows and macOS. It simplifies device discovery.
Step 1: Download and Install Reolink Client
Visit reolink.com/download and download the client for your OS.
Step 2: Launch the Application
Open it and wait for the software to scan your network.
Step 3: Select Your Camera
Your camera should appear in the list. Right-click it and choose Properties or View Details to see the IP address.
This method works well for local connections and avoids router login hassles.
Troubleshooting Common Issues
Camera Not Showing Up in Router
If your camera doesn’t appear in the router’s device list, check:
- Is the camera powered on?
- Is it connected via Wi-Fi or Ethernet?
- Are you scanning the correct IP range?
Try restarting the camera and router. Sometimes DHCP leases expire and need renewal.
Forgotten Login Credentials
If you can’t log into the camera after finding the IP, press and hold the reset button on the camera for 10–15 seconds. This resets it to factory defaults and may restore default IP settings.
Dynamic IP Changes
Your camera might get a different IP each time it reconnects. To prevent this, set a static IP reservation in your router based on the camera’s MAC address.
Can’t Access Camera via IP in Browser
Ensure:
- The camera and computer are on the same network.
- You’re using the correct port (usually 80 or 8080).
- No firewall is blocking the connection.
Best Practices for Managing Your Camera’s IP Address
To make future access easier, consider these tips:
- Write down the IP: Keep a note of your camera’s IP address in a secure place.
- Use descriptive names: Rename your camera in the router or Reolink app for easier identification.
- Update firmware: Regular updates improve stability and security.
- Enable HTTPS:** Always access your camera via https:// to encrypt data.
Also, avoid using public Wi-Fi to access your camera remotely. Instead, use a trusted network or set up a secure tunnel if needed.
Conclusion
Finding your Reolink camera’s IP address doesn’t have to be complicated. With this guide, you now know four effective methods: checking your router, using the Reolink app, scanning directly with software, or leveraging the Reolink Client. Each approach has its strengths, so choose the one that fits your setup best.
Once you have the IP, you can unlock full control over your surveillance system—remote viewing, playback, notifications, and more. And remember: if your IP changes, simply repeat the steps above to find the new address.
Stay safe, stay informed, and enjoy peace of mind with your Reolink camera working exactly how you want it.