Discover your Hikvision NVR’s IP address instantly using the built-in menu or Hik-Connect app—no technical skills needed. Access the NVR locally via its web interface or use the Hikvision SADP tool to scan your network and locate the device automatically. These proven 2026 methods ensure fast, accurate results for seamless setup and remote access.

How to Find the IP Address of My Hikvision NVR in 2026

Key Takeaways

• Check the NVR label: Find the default IP printed on the device.
• Use SADP Tool: Scan your network to detect the NVR’s IP automatically.
• Access via web browser: Enter the gateway IP to locate the NVR.
• Review router DHCP list: Identify the NVR by its MAC address.
• Factory reset if needed: Restore default IP settings for quick access.
• Update firmware regularly: Ensure IP discovery tools remain compatible.

Why This Matters / Understanding the Problem

Imagine you’ve just installed a Hikvision NVR (Network Video Recorder), but now you can’t access the cameras remotely. You try logging into the system, but nothing loads. The issue? You don’t know the IP address. Without it, you can’t view footage, adjust settings, or connect to the system via your phone or computer.

Finding the IP address of your Hikvision NVR is the first step to unlocking full control over your security setup. Whether you’re troubleshooting, setting up remote access, or integrating with smart home systems, knowing how to find the IP address of your Hikvision NVR in 2026 is essential. It’s not just about convenience—it’s about security, efficiency, and peace of mind.

Many users assume the IP address is fixed, but network changes, firmware updates, or DHCP resets can alter it. That’s why learning how to find the IP address of your Hikvision NVR in 2026—no matter the scenario—is a must-have skill for any homeowner, business owner, or installer.

This guide walks you through multiple proven methods, from using the NVR’s built-in menu to third-party tools, so you’ll never be locked out again.

What You Need

You don’t need fancy gear to locate your NVR’s IP address. Here’s a quick rundown of what you’ll need for most methods:

• Hikvision NVR (connected to power and network)
• HDMI monitor or TV (for direct access via the NVR interface)
• Keyboard and mouse (if using the NVR’s GUI)
• Computer or smartphone (on the same local network)
• Ethernet cable (optional, for direct connection)
• Hik-Connect app (download from Google Play or App Store)
• Hikvision SADP Tool (free software from Hikvision’s website)
• Router admin access (if scanning via network devices)

Most of these tools are either free or already part of your setup. The key is being on the same local network as your NVR. If you’re trying to find the IP remotely, you’ll need to first access it locally—this guide focuses on that first critical step.

Pro tip: Keep a notebook or digital note handy to record the IP, subnet mask, and gateway. You’ll thank yourself later when setting up remote access or troubleshooting.

Step-by-Step Guide to How to Find the IP Address of My Hikvision NVR in 2026

Step 1: Use the NVR’s On-Screen Display (Easiest Method)

If you have physical access to the NVR and a monitor, this is the fastest way to find the IP address. This method is ideal for new installations or after a factory reset.

Connect your NVR to a TV or monitor using an HDMI cable. Power on the NVR and wait for it to boot (usually takes 1–2 minutes). Once the home screen appears, press the Menu button on your mouse or remote.

Navigate to Configuration > Network > Basic Settings. Here, you’ll see the IP Address, Subnet Mask, and Gateway listed clearly.

Tip: If you don’t see the menu, try right-clicking on the screen to bring up the quick menu, then select “Main Menu.”

This method gives you the exact IP your NVR is using. It’s especially useful if you’ve set a static IP manually or if the NVR is using DHCP and you want to confirm the current assignment.

Write down the IP address—you’ll use it in Step 5 to access the NVR remotely via a browser or app. This is the most reliable way to find the IP address of your Hikvision NVR in 2026 when you’re on-site.

Step 2: Use the Hikvision SADP Tool (Best for Remote or No-Monitor Scenarios)

The SADP (Search Active Devices Protocol) Tool is Hikvision’s official software for discovering IP cameras and NVRs on your network. It’s free, lightweight, and works even if you don’t have a monitor connected to the NVR.

Download the Hikvision SADP Tool from the official Hikvision support website. Choose the version compatible with your OS (Windows or macOS). Install it—no admin rights needed in most cases.

Run the tool and wait 10–20 seconds. It scans your local network and lists all Hikvision devices, including your NVR. Look for the model number (e.g., DS-7608NI-K2) and check the IP Address column.

Double-click the NVR entry to see more details: MAC address, firmware version, and current password status. If the IP is 169.254.x.x, it means the NVR failed to get a DHCP lease—more on fixing that in Step 4.

Warning: Only download SADP from Hikvision’s official site. Third-party versions may contain malware.

This method is perfect for installers or users who manage multiple Hikvision devices. It’s also the go-to when you’ve forgotten the IP and don’t have a monitor handy. SADP is a powerful tool for anyone learning how to find the IP address of their Hikvision NVR in 2026.

Step 3: Check Your Router’s Connected Devices List

Your home or office router keeps a log of all connected devices. This is a simple, no-software way to locate your NVR’s IP—if you know what to look for.

Open a web browser and type your router’s IP (usually 192.168.1.1 or 192.168.0.1) into the address bar. Log in with your router admin credentials (check the router label or manual if you don’t know them).

Look for a section called Connected Devices, DHCP Clients, or Device List. Scroll through the list and look for entries with names like:

• HIKVISION
• NVR
• DS-7608NI
• Or a MAC address starting with 00:1E:9B (Hikvision’s OUI)

Once you find it, note the corresponding IP address. If you don’t see the name, hover over or click the MAC address—some routers show vendor details.

This method works best if your NVR is using DHCP (the default). If you’ve set a static IP, it will still appear, but you’ll need to confirm it matches your manual settings.

Pro Tip: Bookmark your router’s login page for quick access. Some routers (like TP-Link or ASUS) also have mobile apps with device lists.

Using your router is a great fallback method when SADP isn’t available or if you’re troubleshooting from another room. It’s a key part of knowing how to find the IP address of your Hikvision NVR in 2026 without extra tools.

Step 4: Reset to Default (When All Else Fails)

If the NVR isn’t showing up in SADP or your router list, it may have lost its network connection or been assigned an APIPA address (169.254.x.x). In this case, a factory reset can restore default settings—including the default IP.

Locate the reset button on your NVR. It’s usually a small hole on the back or side panel, labeled “Reset.” Use a paperclip or pin to press and hold it for 10–15 seconds while the NVR is powered on.

Wait for the NVR to reboot (about 2–3 minutes). After reset, most Hikvision NVRs default to IP: 192.168.1.64 with subnet mask 255.255.255.0.

Now, connect your computer to the same network (or directly via Ethernet). Set your PC’s IP to 192.168.1.100 manually (Control Panel > Network > IPv4 settings), or ensure your router’s DHCP range includes 192.168.1.x.

Open a browser and go to http://192.168.1.64. You should see the Hikvision login page. Log in with the default credentials (usually admin / 12345 or admin / password—check your model’s manual).

Warning: A factory reset erases all recordings and custom settings. Only use this as a last resort. Always back up your footage first if possible.

This method is a lifesaver when the NVR is “invisible” on the network. It’s also a common step when learning how to find the IP address of your Hikvision NVR in 2026 after a firmware update or power outage.

Step 5: Access the NVR Remotely (Verify the IP Works)

Once you’ve found the IP address, test it to make sure it’s correct and accessible. This step confirms your NVR is online and ready for remote use.

Open a web browser on a computer connected to the same network. Type the IP address you found (e.g., http://192.168.1.64) into the address bar. Press Enter.

You should see the Hikvision login screen. Log in using your credentials. If the page loads, great! Your IP is active and working.

Alternatively, use the Hik-Connect app:

1. Open the app and tap “Add Device.”
2. Choose “Manual Add” and enter the NVR’s IP address.
3. Enter the username and password.
4. Tap “Save.”

If the app connects, you’ll see live camera feeds. This confirms the IP is correct and the NVR is responding.

Pro Tip: If the page doesn’t load, check your firewall or antivirus settings. Temporarily disable them to test. Also, ensure your browser allows HTTP (some block non-HTTPS sites).

Verifying the IP ensures you’re not chasing a ghost address. This step is crucial for anyone setting up remote viewing, cloud storage, or third-party integrations. It’s the final check in how to find the IP address of your Hikvision NVR in 2026 and use it effectively.

Step 6: Set a Static IP (Optional but Recommended)

DHCP-assigned IPs can change, which breaks remote access. To avoid this, set a static IP for your NVR. This ensures the address never changes unless you want it to.

Log into the NVR’s web interface (via browser) or use the on-screen menu. Go to Configuration > Network > Basic Settings.

Change IP Address Assignment from DHCP to Manual. Enter:

• IP Address: e.g., 192.168.1.100
• Subnet Mask: 255.255.255.0
• Gateway: 192.168.1.1 (your router’s IP)
• Preferred DNS: 8.8.8.8 (Google’s DNS)

Click Save and wait for the NVR to apply changes. It may reboot. Afterward, reconnect using the new static IP.

Warning: Don’t set a static IP that conflicts with your router’s DHCP range. For example, if your router assigns 192.168.1.100–192.168.1.150, use 192.168.1.200 instead.

Setting a static IP is a best practice for long-term reliability. It’s especially important when learning how to find the IP address of your Hikvision NVR in 2026 and ensuring it stays the same.

Pro Tips & Common Mistakes to Avoid

Even with the right tools, small errors can delay your progress. Here are expert tips and pitfalls to dodge:

• Always use the same network: Your computer, phone, and NVR must be on the same local network when searching for the IP. Wi-Fi vs. Ethernet doesn’t matter—just the same subnet.
• Don’t ignore APIPA addresses: If the IP is 169.254.x.x, the NVR couldn’t get a DHCP lease. Check your router, cables, or reset the NVR.
• Update SADP and firmware: Older versions of SADP may miss newer NVRs. Check Hikvision’s site for updates every 6 months.
• Label your NVR: Stick a label on the back with the model, IP, and login. Saves time during troubleshooting.
• Avoid public IP searches: Never search for your NVR’s public IP unless you’ve set up port forwarding. It’s a security risk.

Common Mistake: Trying to find the NVR’s IP over the internet before confirming it works locally. Always test locally first.

Another frequent issue: users forget to open port 8000 (or 80) on their router when setting up remote access. If you plan to view cameras from outside your network, forward port 8000 to your NVR’s local IP. But again—only after you’ve confirmed the IP works locally.

Lastly, never skip the static IP step if you rely on remote viewing. A changed IP can lock you out for days. Knowing how to find the IP address of your Hikvision NVR in 2026 is just the start—keeping it stable is the real win.

FAQs About How to Find the IP Address of My Hikvision NVR in 2026

Q1: Can I find the IP address without a monitor?

Yes! Use the SADP Tool or check your router’s device list. Both methods work without physical access to the NVR’s screen. SADP is the most reliable for this.

Q2: What if SADP doesn’t detect my NVR?

First, confirm both devices are on the same network. If SADP still doesn’t see it, the NVR may have a 169.254.x.x address (no DHCP). Try resetting it or connect directly with an Ethernet cable and set your PC to the 192.168.1.x subnet.

Q3: My NVR’s IP changed after a power outage. Why?

If it was using DHCP, your router may have assigned a new IP. This is why setting a static IP is recommended. After an outage, use SADP or your router to find the new IP, then set it to static.

Q4: Can I use my phone to find the IP?

Yes. Install the Hik-Connect app and enable “Device Search” in the settings. Or, use a network scanner app like Fing to scan your network and look for Hikvision devices.

Q5: Is it safe to set a static IP?

Yes, as long as you avoid IP conflicts. Just ensure the static IP is outside your router’s DHCP range. For example, if your router assigns 192.168.1.100–150, use 192.168.1.200 for the NVR.

Q6: What if I forgot the NVR’s password?

You’ll need to reset the NVR using the reset button. After reset, the default password is usually 12345 or password. But remember—this erases all data.

Q7: Can I find the IP from outside my home network?

Not directly. You must first know the local IP. Once you do, set up port forwarding and use the public IP with the port (e.g., yourpublicip:8000). But this requires advanced setup and is not recommended for beginners.

Final Thoughts

Finding the IP address of your Hikvision NVR doesn’t have to be a headache. With the right tools and a bit of patience, you can locate it in minutes—whether you’re on-site or troubleshooting remotely. The key is knowing your options: the on-screen menu, SADP Tool, router device list, or a factory reset.

Once you’ve found the IP, take the extra step to set it as static. This small move prevents future access issues and makes remote monitoring reliable. And don’t forget to document the IP, login, and network details—future you will be grateful.

Remember, how to find the IP address of your Hikvision NVR in 2026 is not just about tech skills—it’s about maintaining control over your security system. Whether you’re a homeowner, installer, or IT pro, these steps will keep you connected and confident.

Now, go test your IP, log in, and take a look at your cameras. Your security setup is back in your hands—exactly where it should be.