Finding the IP address of your V380 camera is essential for remote viewing, configuration, and troubleshooting. This guide walks you through simple methods—from using the V380 app to scanning your network—so you can quickly connect and manage your device. Whether you’re setting up a new camera or resolving connection issues, these clear steps make it easy for anyone to succeed.
Quick Answers to Common Questions
Can I use my V380 camera on 5 GHz Wi-Fi?
Answer: No, the V380 camera only supports 2.4 GHz networks. Ensure your router broadcasts on this band and disable 5 GHz if you’re unsure.
Why does my camera keep losing its IP?
Answer: This happens when your router assigns dynamic IPs via DHCP. To fix it, reserve a static IP for your camera’s MAC address in your router settings.
Is the V380 app required to find the IP?
Answer: Not necessarily. While the app simplifies discovery, you can also use router logs or network scanners like Fing to locate the IP independently.
What if my router doesn’t show the camera?
Answer: Try rebooting your router and camera. If still missing, perform a network scan using tools like Angry IP Scanner to detect hidden devices.
How do I secure my V380 camera once I have the IP?
Answer: Change default passwords, enable encryption, disable unused ports, and set up motion alerts through the web interface accessed via the IP address.
Introduction: Why You Need the IP Address of Your V380 Camera
You just unboxed your new V380 security camera, set it up in your home, and now you want to check live footage from your phone—but wait, how do you actually connect? The answer lies in one simple piece of information: the IP address. Without knowing your V380 camera’s IP address, you can’t remotely view feeds, adjust settings, or troubleshoot connectivity problems. Whether you’re a beginner or an experienced user, learning how to find this address opens the door to full control over your surveillance system.
In this complete guide, we’ll walk you through every method to discover your V380 camera’s IP address—whether you’re using the official app, digging into your router, or leveraging network scanning tools. We’ll also cover common pitfalls, how to assign a fixed IP for reliability, and what to do if things go wrong. By the end, you’ll not only know where to look but also understand why each step matters.
Method 1: Find IP Using the V380 App (Easiest Method)
The fastest and most user-friendly way to get your V380 camera’s IP address is through the official V380 mobile app. Since the app is designed to communicate directly with your camera, it often reveals network details automatically.
Visual guide about How to Get Ip Address of V380 Camera
Image source: komon-lawyer.jp
Step 1: Install and Open the V380 App
Download the V380 app from the Google Play Store or Apple App Store if you haven’t already. Launch the app and create an account or log in if prompted.
Step 2: Connect to the Same Wi-Fi Network
Ensure both your smartphone/tablet and the V380 camera are connected to the same local Wi-Fi network. This is critical—if they’re on different networks (like your phone on 5G cellular and the camera on home Wi-Fi), the app won’t detect it.
Step 3: Add Your Camera
Tap the “+” button or “Add Device” option. Follow the on-screen instructions to scan for nearby cameras. The app should automatically detect your V380 model once it powers on and connects to Wi-Fi.
Step 4: Check Camera Details
Once added, select your camera from the device list. Go to **Settings > Network** (or similar wording depending on app version). Here, you’ll see the **IP Address**, Subnet Mask, Gateway, and MAC Address displayed clearly.
Tip: Some versions of the app may show the IP only after a firmware update or during initial setup. If it’s missing, try reconnecting the camera or restarting the app.
Method 2: Use Your Router’s Admin Panel
If the app doesn’t show the IP or you prefer managing devices through your router, logging into your home router gives you a bird’s-eye view of all connected gadgets—including your V380 camera.
Step 1: Access Your Router’s Login Page
Open a web browser on any computer or mobile device connected to your home network. Type your router’s default gateway address into the address bar. Common examples include:
- 192.168.1.1
- 192.168.0.1
- 10.0.0.1
Press Enter. You’ll be prompted for a username and password—often printed on the router itself (look for “Admin” or “User” credentials).
Step 2: Navigate to Connected Devices
Once logged in, look for sections labeled:
- Device List
- Attached Devices
- LAN Setup
- DHCP Clients
Each section lists every device currently drawing power from your network, showing their IP addresses, hostnames, and sometimes MAC addresses.
Step 3: Locate Your V380 Camera
Scroll through the list and find an entry that matches your V380 camera. It might appear under a generic name like “Unknown Device” or “Camera,” but you can cross-reference the MAC address with the one printed on your camera’s label or in the app.
Pro Tip: Routers often allow you to assign friendly names to devices—rename yours to “V380 Living Room” so it’s easy to spot next time.
Method 3: Scan Your Network with IP Scanning Tools
When the above methods fail—perhaps because your router interface is outdated or the app isn’t installed—network scanning software offers a powerful alternative. These tools ping every possible IP address on your subnet to detect active devices.
Recommended Tools
- Fing (Free): Available for Android, iOS, and desktop. User-friendly interface with real-time alerts.
- Angry IP Scanner (Windows/macOS/Linux): Lightweight, open-source, and highly accurate.
- Advanced IP Scanner (Windows): Simple GUI with remote control capabilities.
How to Use Fing (Example)
- Download and install Fing on your phone or PC.
- Launch the app and tap “Start Scan.”
- Wait while Fing pings all IPs in your current subnet (e.g., 192.168.1.x).
- Look for a device named “V380,” “CAMERA,” or with a recognizable MAC prefix (often starting with 00:1B:44 for V380 models).
- Note the assigned IP address next to the device name.
Troubleshooting Scan Results
If nothing appears, double-check:
- Your scanning device is on the same network.
- Firewalls aren’t blocking ICMP (ping) requests.
- The camera is powered on and connected to Wi-Fi.
Method 4: Reset the Camera to Factory Defaults
Lost your IP? Forgotten login details? A factory reset restores the camera to its original state—including default network settings—making it easier to locate again.
How to Perform a Hard Reset
- Locate the small reset hole on the side or bottom of the V380 camera.
- Use a paperclip or pin to press and hold the button inside for 10–15 seconds until the LED blinks red/blue rapidly.
- Release and wait for the camera to reboot (takes ~30 seconds).
- Reconnect using the V380 app—it will now use default credentials and display a fresh IP.
Important Notes
- A reset erases all custom settings: motion zones, recording schedules, cloud subscriptions.
- Only do this as a last resort—try other methods first!
Assign a Static IP for Reliable Access
Dynamic IP addresses change periodically due to DHCP leases, which can break remote access if your camera gets a new address. Assigning a static (fixed) IP ensures consistent connectivity.
Steps to Set a Static IP via Router
- From your router’s admin page, go to **DHCP Reservation** or **Address Reservation**.
- Find your V380 camera in the client list by MAC address.
- Assign a preferred IP (e.g., 192.168.1.100) within your subnet range.
- Save changes and reboot the router if required.
Alternative: Configure Static IP on Camera (Advanced)
Some V380 models support manual IP entry in their web interface:
- Connect to the camera’s default IP (often 192.168.1.108).
- Log in with default credentials (admin/password).
- Navigate to **Network Settings** and disable DHCP.
- Enter desired IP, subnet mask (usually 255.255.255.0), and gateway.
Troubleshooting Common Issues
Even with perfect steps, you might hit snags. Here’s how to resolve frequent problems.
Issue: App Can’t Detect Camera
- Confirm both devices are on the same Wi-Fi band (2.4 GHz only—V380 doesn’t support 5 GHz).
- Restart the camera and app.
- Update the V380 app to the latest version.
Issue: IP Changes After Reboot
This usually means no static IP was assigned. Follow the DHCP reservation guide above.
Issue: Can’t Access Web Interface
- Type the correct IP into your browser (no “http://” needed for basic access).
- Clear browser cache or try incognito mode.
- Disable antivirus/firewall temporarily to test.
Issue: Multiple Cameras Cause Confusion
Rename each camera in the app and router to avoid mix-ups. Example: “V380 Garage,” “V380 Backyard.”
Conclusion: Master Your V380 Camera’s Network Presence
Knowing how to get IP address of V380 camera isn’t just a technical skill—it’s the foundation of smart home security. With the methods outlined here—app detection, router inspection, network scanning, and factory resets—you’ll never be stuck without access again. Remember to assign a static IP for stability, keep firmware updated, and always verify your network settings before troubleshooting.
Whether you’re monitoring your driveway, checking in on pets, or securing your business, having full control over your V380 camera starts with that single number: the IP address. Now go forth and connect with confidence!