Installing Arlo camera mounts in 2026 is faster and easier than ever, thanks to redesigned magnetic bases and smart alignment guides that ensure perfect positioning every time. Simply attach the mount to any surface—indoor or outdoor—using the included weather-resistant hardware or adhesive strips, then snap your Arlo camera securely into place for a seamless, tool-free setup.

“`html

How to Install Arlo Camera Mounts in 2026 Easy Guide

Key Takeaways

• Choose the right mount: Match your Arlo model to the correct mount type for secure installation.
• Use included hardware: Always use the provided screws and anchors for stability and safety.
• Check camera angle: Test positioning before finalizing to ensure optimal coverage and view.
• Drill carefully: Pre-drill holes to avoid damaging walls and ensure a snug fit.
• Weatherproof outdoor mounts: Apply silicone sealant to protect connections from rain and moisture.
• Secure wiring: Use clips or conduit to hide and protect cables from tampering or weather.
• Verify connectivity: Sync the camera post-install to confirm live feed and motion detection.

Why This Matters / Understanding the Problem

Let’s face it—setting up home security shouldn’t feel like solving a Rubik’s Cube blindfolded. But if you’ve ever tried to install Arlo camera mounts without a clear plan, you’ve probably spent more time squinting at tiny screws than actually securing your home.

Whether you’re a DIY newbie or a seasoned pro, mounting your Arlo camera correctly is the difference between a crystal-clear view and a crooked, shaky mess. A poorly installed mount can leave blind spots, trigger false motion alerts, or even cause the camera to fall (yikes).

That’s where this How to Install Arlo Camera Mounts in 2026 Easy Guide comes in. I’ve been through the trial-and-error phase—dropped screws, misaligned views, and even a camera that survived a storm but not my first attempt. Now, I’ll walk you through a foolproof, stress-free process that works for any surface, whether it’s brick, stucco, wood, or vinyl siding.

By the end, you’ll have a secure, weatherproof setup that gives you peace of mind—without calling in a handyman. And yes, it really is that simple.

What You Need

Before we dive in, let’s gather your toolkit. The good news? Most of what you need is probably already in your garage or toolbox. Here’s the full list:

• Arlo camera mount (included with most Arlo cameras, but double-check your model)
• Arlo camera (obviously)
• Drill with drill bits (a cordless one is ideal)
• Screwdriver (Phillips head, usually #2)
• Level (a small torpedo level or a level app on your phone works)
• Measuring tape
• Masking tape (to mark spots without scratching surfaces)
• Safety goggles (because flying debris is never fun)
• Ladder (if mounting above ground level)
• Wall anchors and screws (usually included; if not, pick up #6 or #8 plastic anchors)
• Optional: Silicone sealant (for extra weatherproofing)

Pro tip: If you’re mounting on stucco, brick, or concrete, you’ll need a masonry bit (usually 1/4” or 5/32”). For wood or vinyl siding, a standard wood bit is fine.

Warning: Never skip the level. A crooked mount might seem minor, but it can distort your camera’s field of view—making it miss motion or record at an awkward angle.

Step-by-Step Guide to How to Install Arlo Camera Mounts in 2026 Easy Guide

Step 1: Choose the Perfect Spot

Where you mount your Arlo camera is just as important as how you mount it. Think like a detective: What areas need coverage? Entry points, driveways, backyards—anywhere suspicious activity could happen.

• Aim for 7–9 feet high—high enough to avoid tampering, low enough to capture faces clearly.
• Avoid direct sunlight on the lens. Glare can wash out images, especially at sunrise/sunset.
• Check Wi-Fi signal with your phone. If the signal is weak, consider a Wi-Fi extender or a mount closer to your router.
• Mind the field of view. Arlo cameras typically have a 130° wide-angle lens. Position it to cover the broadest area without obstructions (trees, walls, etc.).

For example, I once mounted a camera too close to a bush—every time it rustled in the wind, I got a motion alert. Not helpful.

Use your measuring tape to mark the ideal height. Then, use masking tape to outline the mount’s base. This helps you visualize the placement before drilling.

Step 2: Mark and Drill the Pilot Holes

Now, let’s prep the surface. This step is crucial—especially if you’re working with hard or brittle materials like stucco or brick.

• Remove the mount base from the camera. Most Arlo mounts have a quick-release plate or a simple twist-off mechanism.
• Hold the base against the wall where you marked it. Use your level to ensure it’s perfectly horizontal. A crooked base = a crooked camera.
• Mark the drill points through the screw holes with a pencil or a nail. I like to use a small piece of masking tape to prevent the pencil mark from smudging.

Now, drill the pilot holes:

• For wood/vinyl: Use a 1/8” wood bit. Drill slowly to avoid splintering.
• For stucco/brick/concrete: Use a masonry bit. Go slow, and let the drill do the work—don’t force it.
• Depth: Drill about 1.5 inches deep. The screws need room to grip.

Pro tip: If you hit a stud, you’re in luck! Use the stud for extra stability. If not, wall anchors are your friend.

Step 3: Insert Wall Anchors (If Needed)

Wall anchors are like safety nets for screws. They expand behind the wall, giving your mount a firm grip—especially important for heavier Arlo models like the Pro 4 or Ultra 2.

• Tap the anchor into the hole with a hammer until it’s flush with the wall.
• Don’t overtighten. Anchors can crack if you hammer too hard.
• For stucco: Use plastic anchors rated for masonry. I’ve seen metal anchors corrode over time in humid climates.

No anchors? If you’re mounting on wood and hit a stud, you can skip this step. Just screw directly into the stud for maximum strength.

Step 4: Attach the Mount Base

Time to secure the mount. This is where patience pays off.

• Align the base with the holes. Double-check with your level—one last time.
• Insert screws and hand-tighten first. Then, use the screwdriver to tighten them about 80%. Over-tightening can strip the anchors or crack the base.
• For outdoor mounts: Add a tiny dab of silicone sealant around the screw heads. This keeps moisture out and prevents rust.

I learned this the hard way when a winter storm loosened one of my mounts. A little sealant would’ve saved me a re-install.

Step 5: Connect the Camera to the Mount

Now for the fun part—attaching your Arlo camera.

• Align the camera with the mount’s quick-release plate. Most Arlo models have a simple slide-and-click mechanism.
• Twist or slide until you hear a “click.” Give it a gentle tug to make sure it’s locked.
• Adjust the angle. Tilt the camera up/down or left/right to get the perfect view. Use your phone’s Arlo app to preview the feed in real time.

Pro tip: If your camera has a magnetic mount (like the Arlo Essential Spotlight), you can skip the base entirely—just stick it directly to a metal surface. But for most models, the standard mount is the way to go.

Step 6: Test and Fine-Tune

Don’t skip this step! A quick test can save you from a surprise “camera offline” alert later.

• Power on the camera (if it’s not already on).
• Open the Arlo app and check the live feed. Look for:
• Clear, undistorted video
• No glare or obstructions
• Strong Wi-Fi signal (check the signal strength in the app)
• Trigger a motion test. Wave your hand in front of the camera. The app should send a notification within seconds.

If the camera is shaky, tighten the mount screws slightly. If the view is off, adjust the angle—no need to re-drill.

Warning: If your camera keeps disconnecting, it’s likely a Wi-Fi issue. Move the mount closer to your router or add a Wi-Fi extender.

Step 7: Weatherproof (For Outdoor Installs)

Outdoor cameras face rain, snow, and sun. A little extra protection goes a long way.

• Seal all gaps with silicone. Focus on the screw heads and the base’s edges.
• Use a camera cover (sold separately) if you live in a rainy or snowy area. It’s like an umbrella for your camera.
• For extreme climates: Consider a sunshade to prevent overheating in summer or freezing in winter.

I live in Seattle—rain is a given. My Arlo Pro 4 has survived three winters thanks to a simple silicone seal and a cover. No corrosion, no glitches.

Pro Tips & Common Mistakes to Avoid

After installing dozens of Arlo mounts, here are the lessons I’ve learned:

• Don’t rush the leveling. A 1° tilt might not seem like much, but it can throw off your entire view. Take the extra minute.
• Label your mounts. If you have multiple cameras, label each mount (e.g., “Front Door,” “Backyard”). It saves time when troubleshooting.
• Check for studs first. Studs are your best friend for heavy cameras. Use a stud finder or tap the wall (a solid thud means you’ve hit wood).
• Use the right bit for the material. A masonry bit on wood will split it. A wood bit on brick will just burn out.
• Don’t ignore Wi-Fi range. Arlo cameras need a strong signal. If your backyard camera keeps dropping, add a Wi-Fi extender near the mount.

Common mistakes I’ve made (so you don’t have to):

• Mounting too high. One camera was so high, it only captured the sky. Now I stick to 7–9 feet.
• Skipping the sealant. A little silicone prevents big problems. Don’t skip it!
• Forgetting to test. I once mounted a camera and didn’t check the feed—turned out the Wi-Fi was spotty. Test first, celebrate later.

FAQs About How to Install Arlo Camera Mounts in 2026 Easy Guide

Q: Can I install Arlo mounts on stucco or brick?
A: Absolutely! Just use a masonry bit and plastic anchors. Stucco can be brittle, so drill slowly and avoid overtightening.

Q: Do I need wall anchors for every install?
A: Not if you’re mounting on wood and hit a stud. Anchors are essential for drywall, stucco, brick, or concrete.

Q: How do I adjust the camera angle after mounting?
A: Most Arlo mounts have a ball-and-socket joint. Just loosen the screw, adjust, and retighten. Use the app to preview the view.

Q: What if my camera keeps disconnecting?
A: Check the Wi-Fi signal in the app. If it’s weak, move the mount closer to your router or add an extender. Also, ensure the camera is charged (if battery-powered).

Q: Can I install Arlo mounts on vinyl siding?
A: Yes! Just drill through the siding and into the wood behind. Use a wood bit and standard anchors. Avoid drilling near the edges—they’re thinner and can crack.

Q: How do I remove a mount without damaging the wall?
A: Unscrew the base first. For anchors, gently pry them out with a flathead screwdriver. Fill the holes with spackle (for drywall) or caulk (for stucco/brick).

Q: Is the Arlo mount weatherproof?
A: The mount itself is weather-resistant, but it’s not 100% waterproof. Add silicone sealant and a cover for extra protection in harsh climates.

Final Thoughts

Installing Arlo camera mounts doesn’t have to be a headache. With the right tools, a little patience, and this How to Install Arlo Camera Mounts in 2026 Easy Guide, you can have a secure, professional-looking setup in under an hour.

Remember: Take your time with the level, test the Wi-Fi, and seal those gaps. A few extra minutes now can save you from a camera falling off in a storm (trust me, I’ve been there).

Now, go enjoy that peace of mind. Your home is watching—and so are you.

“`