Step-by-Step Guide: Install Nanit Pro Wall Mount Perfectly for Your Baby’s Safety

Looking for a reliable baby monitor that can keep up with your busy schedule and provide you with peace of mind whenever you’re not in the same room with your little angel? Look no further than Nanit Pro Wall Mount, a high-tech baby monitor designed to make parenting easier and more stress-free. But with so many baby monitors on the market, how can you ensure that you’re installing your Nanit Pro Wall Mount correctly? In this blog post, we’ll guide you through the process of setting up your Nanit Pro Wall Mount, step by step, so that you can watch over your baby from anywhere, anytime.

Gather tools and materials

Installing a Nanit Pro wall mount can be an exciting task. To start, it’s important to gather tools and materials, including a screwdriver, a drill with the appropriate drill bits, a stud finder, and the Nanit Pro wall mount kit. Once you have everything you need, it’s time to get to work.

Make sure to select a suitable location for the mount and use the stud finder to locate the studs behind the wall. This is crucial as it ensures that your mount will securely anchor to the wall. After locating the studs, drill pilot holes for the screws, mount the bracket to the wall, and finally attach the Nanit camera to the bracket.

With everything securely in place, you can now enjoy the benefits of your Nanit Pro camera and wall mount – a clear and full view of your baby’s sleep patterns! Installing your Nanit Pro wall mount is a relatively easy process that can be completed with minimal effort, and you’ll have peace of mind knowing your baby is safe and secure.

Tools: Level, drill, 3/16″ drill bit, Phillips head screwdriver

Before diving into any DIY project, gathering the right tools and materials is essential. For this particular project, you will need a level, a drill, a 3/16″ drill bit, and a Phillips head screwdriver. These tools are necessary for ensuring that your finished project is both sturdy and level.

It’s important to note that using the correct drill bit size is crucial for preventing damage to the wood. An ill-fitting drill bit can easily split or crack the wood, ruining the finished product. It may seem like a small detail, but ensuring that you have the correct tools is crucial for a successful DIY project.

So, make sure you have all your tools on hand before you begin, and double-check that you’ve got the right materials for the job at hand. With the proper preparation, you’ll be able to create a beautiful and durable finished project that you can be proud of for years to come.

how to install nanit pro wall mount

Materials: Nanit Pro Wall Mount, anchors, screws

If you’re ready to set up your Nanit Pro baby monitor, the first step is to gather all the tools and materials you’ll need. One of the most important materials is the Nanit Pro Wall Mount, which is specifically designed to hold your monitor securely in place. You’ll also need anchors and screws to attach the mount to the wall.

It’s important to choose the right size anchors for your wall type and to be sure to use screws that are long enough to penetrate the wall and hold the mount securely. Once you have all your materials and tools, you’re ready to begin the installation process. With a little bit of patience and attention to detail, you’ll have your Nanit Pro baby monitor up and running in no time.

Locate the right spot

Installing the Nanit Pro wall mount may seem like a daunting task, but with a little guidance, it can be done with ease. The first step is to locate the right spot for the mount. The mount should be placed about 3-4 feet away from the crib, and should be able to capture a clear view of the baby’s sleeping area.

It is important to avoid placing the mount in direct sunlight or in an area with a lot of glare, as this can affect the camera’s performance. Additionally, ensure that the mount is securely fastened to the wall, and that it is at a height that is comfortable for you to view the monitor. With these tips in mind, you’ll be well on your way to successfully installing your Nanit Pro wall mount and keeping an eye on your little one with ease!

Measure and mark the wall for placement

When it comes to hanging something on the wall, the first step is to determine the right spot. This requires some careful planning and measuring. Start by considering the size and weight of the object you want to hang.

For larger items, it’s important to locate a stud or other sturdy structure to support the weight. Use a stud finder to locate the studs in the wall and mark them with a pencil. If you’re hanging something lighter, you can use a drywall anchor for added support.

Next, measure the height of the object and mark the spot on the wall with a small pencil mark. Use a level to make sure the mark is straight, and adjust as necessary. It’s also important to consider the surrounding decor and other items on the wall.

Be sure to space your new piece appropriately and avoid overcrowding. By taking the time to measure and mark the wall carefully, you’ll ensure a successful, properly placed display that will enhance your room’s decor.

Ensure it is level with a level tool

If you want to ensure that your project turns out perfectly, you need to make sure that it’s level. That means getting your hands on a level tool, which will help you determine if the surface you’re working with is flat or not. Once you have your level tool, the next step is to find the right spot for it on your project.

Typically, this will be in the center, but you might need to adjust it based on the size and shape of what you’re working on. From there, you can start checking to see if the surface is level. If it’s not, you’ll need to make some adjustments.

This could mean adding or removing material, or using shims to alter the angle. Once you’ve achieved a level surface, you can move on to the next step in your project. By taking the time to ensure that everything is level, you’ll be setting yourself up for success in the long run.

Drill holes and install anchors

When it comes to installing the Nanit Pro wall mount, drill holes and install anchors are a crucial step in the process. Before getting started, make sure you have all the necessary tools and equipment, including a drill, drill bits, anchors, screws, and a level. Begin by measuring and marking the position where you want to mount the camera.

Use the level to ensure that the marks are even and straight. Next, drill holes at the marked spots with the appropriate size bit. Insert the anchors into the drilled holes and tap them gently with a hammer until they are flush with the wall.

Then, attach the mounting plate to the wall using screws and a drill, making sure that it is level. Finally, attach the camera to the mounting plate following the manufacturer’s instructions. With these simple steps, you can securely mount your Nanit Pro camera, ensuring that it stays in place for years to come.

Be sure to drill at a 90-degree angle

When it comes to drilling holes and installing anchors, it’s crucial to ensure that you drill at a 90-degree angle. This might seem like a small detail, but it can make all the difference in the world when it comes to the stability and security of your installation. If you don’t drill at the proper angle, you run the risk of the anchor not gripping the wall properly, which could result in a dangerous and unstable installation.

So, before you start drilling, take the time to measure and mark your anchor locations, making sure that they are all at a perfect 90-degree angle. This will help ensure that your installation is strong and secure, providing you with peace of mind and the confidence to tackle more ambitious projects. So, next time you’re installing anchors, remember to drill at a 90-degree angle – your safety and security depend on it!

Insert anchors into drilled holes

If you want to secure an object in place, whether it be a shelf, a hook, or a piece of art, you’ll likely need to drill some holes and install anchors. Anchors are essential for preventing your object from falling or shifting. To get started, choose a drill bit that matches the size of your anchor.

Once you’ve drilled your hole, insert the anchor by tapping it gently into place, making sure it’s flush with the wall. Then, insert your screw into the center of the anchor and use a screwdriver to tighten it. Your object should now be securely anchored in place.

Remember to choose the appropriate anchor for the weight of your object. Using an anchor that’s too small for the job could result in a dangerous and unstable installation. By taking the time to properly drill holes and install anchors, you can ensure a safe and long-lasting hold for your object.

Attach the mount

If you’re wondering how to install the Nanit Pro wall mount, don’t worry – it’s a simple process that you can tackle in just a few steps. Once you’ve unpackaged the wall mount, you’ll need to choose the best location for it on your wall. Once you’ve found the ideal location, mark the spots where you will place the screws to secure the mount.

Then, begin to attach the mount to the wall with the included screws using a power drill to keep the mount steady and secure as you work. Make sure you use a level to ensure the mount is properly aligned and straight. Once you’ve attached the mount firmly to the wall, you’re ready to attach the Nanit Pro camera and start keeping an eye on your loved ones.

With these easy steps, you’ll have your camera up in no time!

Align with anchors and attach with screws

When it comes to mounting your TV, it’s important to ensure that your mount is attached securely to avoid any accidents. One way to do this is to align the anchors and attach with screws. Start by finding the studs in your wall using a stud finder.

Once you’ve located the studs, mark the spots where you will be mounting your TV. Next, position your mount on the wall, making sure it’s level. Use a pencil to mark where the screw holes will go.

Pre-drill the holes using a drill bit that’s slightly smaller than the screws you’re using. Attach the mount to the wall using screws and washers, making sure to tighten them securely. Finally, attach the mounting bracket to the back of your TV using screws.

Once everything is securely attached, lift the TV onto the mount and make any necessary adjustments. Remember to always follow the manufacturer’s instructions and seek professional help if you’re unsure about anything. With the right tools and a little patience, you’ll have your TV securely mounted in no time!

Tighten screws with Phillips head screwdriver

Attaching a mount requires careful attention to detail, including tightening screws with a Phillips head screwdriver. As you begin the process, make sure to have all the necessary tools and hardware to avoid frustration and wasted time. Start by positioning the mount in the desired location, and marking the spots where the screws will be inserted.

Then, use the Phillips head screwdriver to carefully insert and tighten each screw, making sure that the mount is secure and stable. It’s important to avoid overtightening, as this can strip the screws and cause damage to the mount. As you work, periodically check the levelness of the mount to ensure that it is straight and aligned correctly.

By following these simple steps, you can successfully attach a mount and enjoy your new display with confidence.

Attach the Nanit Pro Camera

Installing the Nanit Pro Camera with its wall mount is a quick and easy process. First, locate a flat surface on the wall where you want to attach the camera. Then, use the provided screws to secure the wall mount base to the wall.

Once you have the wall mount base attached, it’s time to attach the camera itself. Simply slide the camera onto the mount base and rotate it until it clicks into place. You’ll know it’s properly attached when you hear the click sound.

Make sure the camera is facing the area you want to monitor and adjust it as needed. With the Nanit Pro Camera and its easy-to-install wall mount, you’ll have peace of mind knowing you have a top-of-the-line baby monitor watching over your little one.

Insert camera into the mount

To fully enjoy the benefits of the Nanit Pro Camera, you need to make sure it is installed correctly. Attaching the camera to its mount is a vital step that requires some care and attention. To start, locate the magnetic base on the back of the camera.

Hold the mount up to the desired location on the wall and attach it with screws. Once you have secured the mount, align the camera’s magnetic base with the mount and push it into place. You should hear a satisfying click when the Nanit Pro Camera snaps into place.

Make sure to double-check that the camera is firmly attached before letting go. It is also helpful to adjust the camera’s angle, so it is pointing towards the area you want to monitor. Once you have inserted the camera into the mount, you’re ready to start monitoring your baby’s sleep and keeping track of their progress.

With its advanced features and sleek design, the Nanit Pro Camera is an excellent investment in your child’s sleep health and your peace of mind.

Secure with the locking screw at the bottom of the mount

If you’re wondering how to attach your Nanit Pro Camera, start by securing it with the locking screw at the bottom of the mount. This is an essential step to ensure that your camera is stable and won’t move around. Once you have attached the camera securely to the mount, you can position it wherever you like and start monitoring your little one.

With the Nanit Pro Camera, you’ll be able to get a crystal-clear view of your baby, even in the middle of the night. Plus, you can connect the camera to your smartphone or other device to keep an eye on things even when you’re not in the room. This is a great way to get peace of mind and make sure that your baby is safe and sound at all times.

So why not give it a try today and see how easy it is to use the Nanit Pro Camera to monitor your little one?

Final check

If you’ve successfully installed your Nanit Pro wall mount, it’s time for a final check to ensure it’s working correctly. Take a step back and make sure the camera is level and pointing in the desired direction. Confirm that the camera is connected to your Wi-Fi network and that you’ve downloaded the Nanit app on your smartphone or tablet.

Open the app to ensure you have a clear video feed and that the camera is functioning correctly. Additionally, check that the microphone and speakers are working and that you can hear sound from the camera and can speak through the app. By doing these final checks, you can be confident that your Nanit Pro wall mount is installed correctly and ready to monitor your baby’s sleep.

With the Nanit Pro wall mount, you can rest easy knowing that your little one is safe and sound.

Ensure the mount and camera are secure and level

When setting up your camera for photography or videography, it’s important to ensure that both the mount and camera are secure and level. This final check can make the difference between getting a great shot or having to start over because the camera moved or tilted. First, make sure that your mount is properly tightened and secured to the surface you’re working on.

Next, ensure that your camera is securely attached to the mount and that it’s level. Even just a slight tilt can throw off the entire shot, so take the extra time to double-check. Finally, consider using a spirit level to ensure that both the mount and camera are level.

This will eliminate any guesswork and ensure that your shot is perfectly straight. Remember, taking the time to ensure your equipment is secure and level can save you a lot of time and frustration in the long run!


In summary, installing the Nanit Pro Wall Mount is a breeze! With just a few simple steps and some basic tools, you’ll have your Nanit Pro up and running in no time. It’s like hanging a picture, except this time your picture can monitor your baby’s sleep patterns and provide you with valuable insights. So go ahead, take the plunge and install your Nanit Pro Wall Mount today.

Your little one (and your sleep schedule) will thank you!”


What tools do I need to install the Nanit Pro Wall Mount?
You will need a drill, a screwdriver, a level, and the included mounting hardware.

Can the Nanit Pro Wall Mount be installed on any type of wall?
Yes, the Nanit Pro Wall Mount can be installed on drywall, plaster, or wood.

Can I remove the Nanit Pro Wall Mount once it’s installed?
Yes, the Nanit Pro Wall Mount can be easily removed by unscrewing it from the wall.

Is it possible to install the Nanit Pro Wall Mount without damaging the wall?
Yes, if the mount is installed correctly, it should not cause any damage to the wall. However, it’s always a good idea to check with a professional if you’re unsure about the installation process.