How to Install Simplicams : Step-by-Step Guide

To install SimpliCams, start by connecting the camera to Wi-Fi and scanning the QR code. Then, follow the on-screen instructions for video verification and support.

Additionally, you can strategically place the cameras near your main and back entrances for optimum security. SimpliCams can be easily installed by plugging them in and using the SimpliSafe app.

How to Install Simplicams  : Step-by-Step Guide


Pre-installation Preparation

When it comes to installing Simplicams, it is crucial to start with proper pre-installation preparation. This ensures a smooth and hassle-free installation process. The first step in the pre-installation process is choosing ideal locations for your SimpliCam.

Choosing Ideal Locations For Simplicam

Before you start installing your SimpliCams, it’s important to determine the best locations for optimal security coverage. The most obvious places to install a SimpliCam are near your main entrance and back entrance. These areas are typically high-traffic and provide important points of entry and exit for your home.

However, it’s also a good idea to think outside the box and consider other strategic locations. Some additional areas to consider for camera placement include:

  • Garage doors
  • Windows facing driveways or backyards
  • Staircases or hallways
  • Basement entrances

By strategically placing your SimpliCams in these locations, you can ensure maximum coverage of your home and property.

Gathering Necessary Tools

Once you have determined the ideal locations for your SimpliCams, the next step is to gather the necessary tools for installation. Here’s a list of tools you will need:

Screwdriver Drill Level
Wall anchors and screws Power drill Tape measure
Stud finder Cable clips Power cables

Having these tools ready before you start the installation process will save you time and ensure a successful installation.

Now that you have chosen the ideal locations for your SimpliCams and gathered the necessary tools, you are ready to move on to the next step of the installation process. Stay tuned for our next blog post on the actual installation of SimpliCams.

How to Install Simplicams  : Step-by-Step Guide


Installation Steps

To install SimpliCams, begin by connecting to Wi-Fi, scanning the QR code, and enabling video verification. Finally, ensure successful setup and support for a seamless installation process. SimpliCams offer a simple setup process with serious security features, enhancing your home protection effortlessly.

Unboxing Simplicam

Before you start the installation process, you need to unbox your SimpliCam and make sure you have all the necessary components. The package should include the SimpliCam device, a power adapter, a USB cable, and an instruction manual. Take a few minutes to carefully unbox everything and familiarize yourself with the items.

Connecting Simplicam To Wi-fi

To use your SimpliCam, it needs to be connected to your Wi-Fi network. Follow these steps to ensure a seamless connection:

  1. Power up your SimpliCam by plugging it into a power outlet using the provided power adapter.
  2. Wait for the SimpliCam to initialize and enter setup mode. This is indicated by a blinking green light on the device.
  3. Using your smartphone or tablet, go to the Wi-Fi settings and connect to the Wi-Fi network named “SimpliCam Setup” or a similar name.
  4. Open the SimpliCam app on your device and follow the instructions to complete the Wi-Fi setup process. This typically involves selecting your home Wi-Fi network from a list and entering the password.
  5. Wait for the SimpliCam to connect to your home Wi-Fi network. This may take a few minutes. Once connected, the green light on the device will turn solid.

Setting Up Simplicam Via App

After successfully connecting your SimpliCam to Wi-Fi, you can proceed with setting it up through the SimpliCam app. Here are the steps to follow:

  1. Launch the SimpliCam app on your smartphone or tablet.
  2. Log in to your SimpliSafe account or create a new one if you don’t have an existing account.
  3. Tap on the “Add Device” button in the app and select “SimpliCam” from the list of available devices.
  4. Follow the on-screen instructions to scan the QR code located on the back of your SimpliCam.
  5. Wait for the app to detect and configure your SimpliCam. This process may take a few minutes.
  6. Once the setup is complete, you’ll be able to view live video footage from your SimpliCam and access additional features through the app.

That’s it! You have successfully installed your SimpliCam and connected it to your Wi-Fi network. Now you can enjoy the benefits of a smart and secure home surveillance system. If you encounter any issues during the installation process, refer to the instruction manual or contact SimpliSafe support for assistance.

Advanced Installation Options

If you’re looking to explore advanced installation options for your SimpliCam, there are several innovative configurations and settings to consider. Whether it’s integrating your SimpliCam with your SimpliSafe system or mounting it outdoors, these advanced installation options can further enhance the security and surveillance capabilities of your SimpliCam.

Integration With Simplisafe System

Integrating your SimpliCam with your SimpliSafe system allows for a seamless security setup. By connecting your SimpliCam to your existing SimpliSafe system, you can consolidate monitoring and control within a single interface. This integration enables centralized management of your security devices, providing a unified approach to safeguarding your property.

Mounting Simplicam Outdoors

When mounting your SimpliCam outdoors, it’s crucial to ensure it is properly protected from the elements. Utilize weatherproof housing or enclosures to shield the camera from rain, wind, and extreme temperatures. Additionally, consider the camera’s positioning to capture optimal outdoor surveillance coverage while safeguarding it from tampering or theft.

Testing And Troubleshooting

Testing and troubleshooting SimpliCams is essential to ensure smooth operation. Below are guidelines to verify SimpliCam functionality and common issues with their solutions.

Verifying Simplicam Functionality

  • Ensure SimpliCam is properly connected to a power source.
  • Check if the camera’s LED indicators are active.
  • Access the SimpliSafe app to view the camera feed.
  • Test remote control functions such as pan, tilt, and zoom.
  • Verify motion detection and notification settings.

Common Issues And Solutions

Issue Solution
SimpliCam not connecting to Wi-Fi Ensure correct Wi-Fi password and network settings.
Camera feed freezing or lagging Check for a stable internet connection and reboot the camera.
Motion detection sensitivity too high Adjust settings in the SimpliSafe app to reduce sensitivity.
Poor video quality Ensure sufficient lighting in the camera’s view and check camera lens for any obstructions.

By following these steps, you can easily test and troubleshoot SimpliCams to ensure optimal performance and home security.

How to Install Simplicams  : Step-by-Step Guide


Frequently Asked Questions Of How To Install Simplicams

Can I Install Simplisafe Myself?

Yes, you can install SimpliSafe by yourself. You have the option of professional installation or DIY.

Where Do You Put Simplicam?

You can install SimpliCam near your main entrance, back entrance, or anywhere else you want to monitor. Simply plug it in, open the SimpliSafe app, and follow the on-screen instructions. It’s easy to set up and start protecting your home.

How Long Does Simplisafe Take To Install?

SimpliSafe can be installed quickly, typically within an hour. Connect to Wi-Fi, scan the QR code, set up video verification, and you’re done. You can also opt for professional installation or install it yourself.

How Do I Connect To Simplisafe?

To connect to SimpliSafe, simply plug in your device and open the SimpliSafe app. Follow the on-screen instructions to connect to Wi-Fi, scan the QR code, and complete the setup process. For assistance, visit the SimpliSafe support page for detailed installation guides.


In just a few simple steps, you can have your SimpliCam installed and ready to provide you with peace of mind and added security. With easy DIY installation and seamless app integration, SimpliCam makes it effortless to protect your home.

Say goodbye to worries and hello to serenity with SimpliCam.