How to Mount Amazon Ring Doorbell with Tape A Simple Guide

Mounting your Amazon Ring Doorbell with tape is a quick, damage-free solution that avoids drilling and preserves your home’s exterior. Using high-quality outdoor mounting tape ensures a secure, weather-resistant hold—perfect for renters or those seeking an easy DIY install. Just clean the surface, apply the tape, and press the doorbell firmly into place for a reliable setup in minutes.

Key Takeaways

• Choose strong adhesive tape for secure, long-lasting Ring doorbell mounting.
• Clean surface thoroughly before applying tape to ensure maximum adhesion.
• Align carefully first to avoid repositioning mistakes with sticky tape.
• Press firmly for 30 seconds to activate tape bonding strength effectively.
• Wait 24 hours before attaching Ring to ensure tape cures fully.
• Check alignment often during curing to prevent shifting or sagging.
• Use outdoor-rated tape to withstand weather and temperature changes reliably.

Why Choose Tape for Mounting Your Ring Doorbell?

Installing a Ring Doorbell is one of the simplest yet most effective ways to enhance your home’s security. However, not everyone wants to drill holes into their walls—whether you’re renting, concerned about damaging siding, or simply looking for a temporary solution. Enter tape mounting: a clean, reversible, and surprisingly sturdy method to install your Amazon Ring Doorbell without tools or permanent alterations. With the right adhesive tape, you can achieve a secure mount that withstands weather, vibrations, and daily wear.

Many homeowners and renters alike are turning to high-quality double-sided tape as a go-to mounting solution. Unlike traditional screws and anchors, tape offers flexibility, ease of installation, and the ability to reposition or remove the device without leaving behind unsightly holes or residue (when used correctly). This guide dives deep into how to mount Amazon Ring Doorbell with tape, covering everything from choosing the right adhesive to long-term maintenance. Whether you’re mounting on brick, stucco, wood, or vinyl siding, we’ll show you how to do it safely and effectively—no handyman skills required.

Understanding Your Ring Doorbell Model and Tape Compatibility

Ring Doorbell Variants and Mounting Requirements

Before selecting tape, it’s crucial to understand your specific Ring Doorbell model. Amazon offers several versions, each with unique dimensions, weight, and mounting needs:

• Ring Video Doorbell (2nd Gen): 2.44 x 4.98 x 1.10 inches, 7.8 oz (220 g)
• Ring Video Doorbell 3/3 Plus: 2.44 x 4.98 x 1.10 inches, 8.0 oz (227 g)
• Ring Video Doorbell 4: 2.44 x 4.98 x 1.10 inches, 8.2 oz (232 g)
• Ring Video Doorbell Pro: 1.81 x 4.75 x 1.06 inches, 8.8 oz (250 g)
• Ring Video Doorbell Wired: 2.44 x 4.98 x 1.10 inches, 7.8 oz (220 g)

All models come with a standard mounting bracket, but their weight and shape affect how tape performs. Heavier models like the Ring Pro require stronger adhesives and larger contact surfaces. Always check the weight and backplate design before choosing a tape solution.

Types of Adhesive Tapes for Doorbell Mounting

Not all tapes are created equal. For outdoor use—especially in variable climates—you need a tape designed for permanent outdoor bonding. Here are the top options:

• 3M VHB (Very High Bond) Tape: Industry standard for outdoor mounting. Available in clear, gray, and black. Resistant to UV, moisture, temperature fluctuations (-30°F to 200°F), and vibration. Ideal for metal, glass, and smooth surfaces.
• Scotch Outdoor Mounting Tape: Waterproof, weather-resistant, and easy to cut. Works well on wood and vinyl but less effective on textured stucco.
• Heavy-Duty Double-Sided Foam Tape: Offers cushioning and flexibility, great for uneven surfaces. Brands like Gorilla and Duck offer 1-inch-wide options with 10–15 lbs of holding power.
• Removable Adhesive Pads (for temporary use): Best for renters or short-term setups. Less durable but leaves no residue.

Pro Tip: For best results, choose a tape that’s at least 1 inch wide and rated for outdoor use and temperatures below freezing. A single strip of 3M VHB Tape (5952 or 5925 series) can hold up to 15 lbs per square inch—more than enough for any Ring Doorbell.

Step-by-Step Guide to Mount Amazon Ring Doorbell with Tape

Tools and Materials You’ll Need

Before starting, gather the following:

• Your Ring Doorbell (charged and tested)
• Original mounting bracket (included with the doorbell)
• High-quality double-sided outdoor mounting tape (3M VHB recommended)
• Isopropyl alcohol (70% or higher) and lint-free cloth
• Ruler or measuring tape
• Pencil or erasable marker
• Scissors or utility knife
• Level (optional, for perfect alignment)

Step 1: Choose and Prepare the Mounting Surface

The success of tape mounting depends heavily on surface preparation. Follow these steps:

1. Select the location: Aim for a height of 48 inches (4 feet) from the ground—optimal for facial recognition and package visibility. Ensure the area has a clear view of your walkway and is within Wi-Fi range.
2. Clean the surface: Use isopropyl alcohol and a lint-free cloth to wipe down the mounting area. Remove dust, grease, oil, and any loose particles. Let it dry completely (3–5 minutes).
3. Check surface texture: Tape works best on smooth, non-porous surfaces. For textured stucco or rough brick, consider using a backer plate (see Section 4).

Example: A customer in Phoenix mounted their Ring Doorbell 3 on a smooth stucco wall. After cleaning with alcohol, they applied 3M VHB tape and reported no issues after 8 months—even during summer heatwaves.

Step 2: Cut and Apply the Tape

Measure the back of your Ring Doorbell bracket. Most brackets are 2.5 inches wide and 5 inches tall. Cut tape strips to fit:

• Apply two vertical strips (5 inches long) along the sides of the bracket.
• Add one horizontal strip (2.5 inches) across the top for extra support.
• For heavier models (e.g., Ring Pro), use three vertical strips or a full 2.5” x 5” rectangle.

Key Tip: Remove the tape’s backing slowly. Press the adhesive side firmly onto the bracket using your fingers or a roller tool. Avoid touching the adhesive with bare hands to prevent oil transfer.

Step 3: Mount the Bracket to the Wall

Now it’s time to attach the bracket:

1. Align the bracket using a pencil mark or level. Double-check positioning.
2. Peel off the outer tape liner.
3. Press the bracket to the wall with firm, even pressure. Apply at least 15 seconds of sustained pressure (30 seconds is better).
4. Wait 24 hours before attaching the doorbell. This allows the adhesive to fully cure and bond to the surface.

Why wait 24 hours? Adhesive strength increases over time. 3M VHB reaches 90% of its full strength after 72 hours, but 24 hours is the minimum for safe use.

Step 4: Attach the Ring Doorbell

After the curing period:

1. Slide your Ring Doorbell into the bracket until it clicks.
2. Ensure the camera angle is optimal—slightly downward for facial recognition.
3. Test motion detection and Wi-Fi signal via the Ring app.

Pro Tip: Use the Ring app’s Live View to fine-tune positioning before finalizing. If the view is off, gently lift the bracket (without peeling the tape) and reposition.

Advanced Tape Mounting Techniques for Challenging Surfaces

Mounting on Textured Stucco or Rough Brick

Textured surfaces create air pockets under tape, reducing adhesion. To solve this:

• Use a backer plate: Attach a small piece of smooth plastic, acrylic, or aluminum (2.5” x 5”) to the wall first using tape. Then, mount the bracket to the plate. This creates a flat, stable base.
• Apply multiple tape layers: Use 3M VHB tape with a foam core (e.g., 5952) to conform to minor surface irregularities.
• Prime the surface: For porous materials like brick, apply a thin layer of 3M Primer 94 to enhance tape adhesion.

Example: A homeowner in Denver used a 1/8” acrylic backer plate with 3M VHB tape on rough brick. After 6 months, the doorbell remained secure despite snow, ice, and -10°F temperatures.

Dealing with Vinyl Siding and Wood

Vinyl siding expands and contracts with temperature, which can weaken tape over time. To mitigate:

• Mount on a stable substrate: Attach the tape to a wooden trim board behind the siding, not the flexible vinyl panels.
• Use flexible tape: Choose a tape with high elongation (e.g., 3M VHB 4930), which can stretch slightly without breaking.
• Avoid direct sun exposure: Vinyl can warp in heat. Position the doorbell in a shaded area if possible.

For wood surfaces, ensure the wood is dry and sealed. Unsealed wood absorbs moisture, which can degrade adhesive bonds.

Using Tape in Extreme Weather Conditions

Adhesive performance varies with climate:

• Hot climates (e.g., Arizona): High temperatures can soften adhesives. Use UV-resistant tape (3M VHB) and avoid direct midday sun.
• Cold climates (e.g., Minnesota): Freezing temperatures reduce flexibility. Apply tape at 50°F or higher. 3M VHB remains effective down to -30°F.
• Humid environments (e.g., Florida): Moisture-resistant tape is essential. Clean surfaces thoroughly to prevent mold under the adhesive.

Data Point: In a 2023 consumer test, 3M VHB tape maintained 98% adhesion strength after 1 year in coastal Florida (high humidity, salt air).

Maintaining and Troubleshooting Tape-Mounted Ring Doorbells

Routine Maintenance for Longevity

Even the best tape requires care. Follow these tips:

• Inspect every 3 months: Check for lifting edges, discoloration, or debris buildup. Use a toothpick to gently remove dirt from tape seams.
• Clean the surface: Wipe the area around the bracket with a damp cloth. Avoid harsh chemicals that degrade adhesives.
• Check for vibration: Loose brackets can cause false motion alerts. Tighten the doorbell in its slot or reapply tape if needed.

Tip: Keep a spare piece of tape on hand for quick repairs. Store it in a cool, dry place.

Common Issues and Fixes

Here are frequent problems and solutions:

Issue	Cause	Solution
Bracket detaches after a few weeks	Surface not cleaned properly or low-quality tape	Remove old tape, clean with alcohol, reapply high-grade tape (3M VHB)
Doorbell wobbles in the bracket	Bracket not fully seated or tape not applied evenly	Remove doorbell, press bracket firmly, wait 24 hours before reinserting
Adhesive residue on wall after removal	Used non-removable tape or left on too long	Use a plastic scraper and adhesive remover (e.g., Goo Gone); avoid heat guns
Camera angle changes over time	Bracket shifted due to weak adhesion	Reapply tape with additional strips; use a level to realign
Wi-Fi signal drops	Bracket blocks signal (metal backer plate)	Use plastic backer; reposition doorbell slightly

When to Replace the Tape

Replace the tape if:

• The bracket shows signs of lifting (gaps, peeling)
• You’ve had the doorbell mounted for 18–24 months (even high-quality tape degrades over time)
• You’re relocating the doorbell to a new surface
• After severe weather (hurricane, hailstorm)

Note: Never reuse old tape. Adhesive strength diminishes after removal.

Comparing Tape vs. Traditional Screw Mounting

Pros and Cons of Tape Mounting

Advantages:

• No drilling: Ideal for rentals, historic homes, or delicate surfaces.
• Reversible: Remove without damage (when done correctly).
• Faster installation: No need for anchors, screws, or leveling tools.
• Weather-resistant: High-end tapes outperform screws in vibration-heavy areas (e.g., near roads).

Disadvantages:

• Less secure in extreme conditions: Tape may fail in prolonged extreme heat/cold (though 3M VHB handles most climates).
• Surface dependency: Requires smooth, clean, non-porous surfaces for best results.
• Longer curing time: 24-hour wait before use.

When to Use Screws Instead

Consider traditional mounting if:

• You own your home and want a permanent setup
• Mounting on a high-traffic or vandal-prone area (screws are harder to remove)
• Surface is too rough or porous for tape (e.g., unpainted concrete)
• You need to adjust the angle frequently (screws allow easier repositioning)

Hybrid Approach: For added security, use tape as the primary mount and add one screw through the bracket’s center hole. This combines the benefits of both methods.

Final Thought: Tape mounting isn’t a compromise—it’s a smart, modern solution for millions of users. With the right product and technique, your Amazon Ring Doorbell with tape can be just as reliable as a screw-mounted one—without the holes.

Conclusion: A Clean, Flexible Solution for Modern Homes

Mounting your Amazon Ring Doorbell with tape is a practical, renter-friendly, and surprisingly durable option that’s gaining popularity across the U.S. and beyond. By choosing high-performance adhesive like 3M VHB, preparing your surface meticulously, and following a careful installation process, you can achieve a secure mount that lasts for years—even in harsh weather. Whether you’re protecting a city apartment, a suburban home, or a vacation property, tape mounting offers flexibility, clean aesthetics, and peace of mind.

This guide has shown you how to mount Amazon Ring Doorbell with tape effectively, from model selection to long-term maintenance. Remember: success lies in the details—clean surfaces, proper curing time, and the right tape for your environment. While traditional screws have their place, tape technology has evolved to the point where it’s no longer a “temporary fix” but a viable long-term solution. So grab your tape, clean your wall, and enjoy the convenience of a tool-free, hole-free Ring Doorbell installation that keeps your home safe—without leaving a trace.

Frequently Asked Questions

Can I use tape to mount my Amazon Ring Doorbell instead of screws?

Yes, you can use heavy-duty double-sided tape or mounting tape designed for outdoor use to install your Ring Doorbell without drilling. Ensure the surface is clean and dry for maximum adhesion, and avoid extreme temperature fluctuations.

What type of tape is best for mounting a Ring Doorbell?

Opt for high-strength, weather-resistant tapes like 3M VHB (Very High Bond) tape or outdoor-rated double-sided mounting tape. These provide a secure hold and are designed to withstand rain, wind, and temperature changes.

Is using tape to mount a Ring Doorbell safe and stable?

When applied correctly, heavy-duty tape offers a stable and secure mount for your Ring Doorbell. However, check the tape’s weight rating and periodically inspect the mount to ensure it hasn’t loosened over time.

How do I remove tape residue after uninstalling a taped Ring Doorbell?

Use a gentle adhesive remover or rubbing alcohol to dissolve leftover tape residue. Gently scrape with a plastic card or soft cloth to avoid damaging the wall or doorframe.

Can I use tape to mount my Ring Doorbell on a brick or stucco surface?

Yes, but ensure you use a tape rated for rough, uneven surfaces like brick or stucco, such as 3M VHB tape. Clean the area thoroughly and apply firm pressure for 30+ seconds during installation for better adhesion.

Will using tape void the warranty on my Amazon Ring Doorbell?

No, using tape to mount your Ring Doorbell does not void the warranty, as long as you follow the manufacturer’s guidelines. Avoid modifying the device itself or using methods that could damage its components.