Mounting an Arlo camera on brick in 2026 is simple and secure when you use the right tools—start by choosing a masonry drill bit and high-quality plastic anchors designed for brick surfaces. Ensure your camera is positioned for optimal coverage, then drill pilot holes, insert anchors, and firmly attach the mounting bracket before snapping the camera into place. This method guarantees a stable, weather-resistant installation without damaging your brickwork.

“`html

How to Mount Arlo Camera on Brick in 2026 Easy Guide

Key Takeaways

• Use masonry screws: Opt for corrosion-resistant screws designed for brick to ensure a secure, lasting mount.
• Drill pilot holes: Prevent brick cracking by drilling pilot holes before inserting anchors or screws.
• Choose the right tools: A hammer drill with a masonry bit ensures clean, efficient brick penetration.
• Position strategically: Mount at 8–10 feet high for optimal coverage and tamper resistance.
• Seal gaps: Apply silicone caulk around screws to protect brick from water damage and debris.
• Test alignment: Verify camera angle and Wi-Fi signal strength before finalizing installation.

Why This Matters / Understanding the Problem

You’ve just unboxed your sleek new Arlo camera, excited to boost your home security. But then it hits you: *How do I mount this on brick without turning it into a DIY disaster?*

Brick walls are tough—dense, unforgiving, and not exactly screw-friendly. Unlike drywall, where a simple anchor might do the trick, brick demands the right tools, the right hardware, and a bit of patience. And let’s be honest: the last thing you want is your Arlo camera dangling by a single plastic anchor after a windy night.

If you’re searching for how to mount Arlo camera on brick in 2026 easy guide, you’re not alone. Many homeowners face the same challenge—especially with newer Arlo models like the Pro 5, Ultra 2, or the battery-powered Essential series. The good news? With the right approach, it’s totally doable—even if you’re not a contractor.

In this guide, I’ll walk you through the process step by step, based on real installs I’ve done at my own home and for friends. We’ll cover what works, what doesn’t, and how to avoid the rookie mistakes that could cost you time, money, or a camera.

What You Need

Before you grab a drill and start hammering, let’s make sure you’ve got everything you need. Trust me—running to the hardware store mid-project is the worst.

• Arlo camera (any model—Pro, Ultra, Essential, etc.)
• Mounting bracket (usually included with the camera)
• Masonry drill bits (carbide-tipped, 5/32” or 1/4” for pilot holes)
• Hammer drill (or regular drill with hammer function)
• Wall anchors (screw anchors like Tapcon screws or plastic anchors rated for masonry)
• Measuring tape
• Pencil or marker
• Level (a small torpedo level works great)
• Masking tape (optional, but helps prevent chipping)
• Vacuum or brush (to clean dust from drilled holes)
• Screwdriver or drill bit for final screw tightening

Pro Tip: If your Arlo came with a plastic anchor, don’t use it on brick. It’s designed for drywall. Masonry needs stronger hardware—go with Tapcon screws or similar.

This setup ensures your how to mount Arlo camera on brick in 2026 easy guide is safe, secure, and long-lasting. No shortcuts here.

Step-by-Step Guide to How to Mount Arlo Camera on Brick in 2026 Easy Guide

Alright, let’s get into it. I’ll walk you through the process as if we’re standing on your porch together, coffee in hand, ready to get this done.

Step 1: Choose the Perfect Spot

Not every brick wall is created equal. Before you drill, pick a location that gives your Arlo the best view—without making it an easy target for thieves or weather.

• Look for a spot 7–8 feet high (out of casual reach).
• Ensure the camera has a clear line of sight to your front door, driveway, or backyard.
• Avoid direct sunlight or rain exposure if possible. Arlo cameras are weather-resistant, but not weather-proof.
• Check for nearby power sources if you’re using a wired model (like Arlo Pro 5S).

Personal Insight: I once mounted an Arlo too low—my neighbor’s kid accidentally knocked it off while playing. Lesson learned: height matters.

Once you’ve picked the spot, use a measuring tape and pencil to mark the center of where the mounting bracket will go. This is the foundation of your how to mount Arlo camera on brick in 2026 easy guide—get it right, and the rest is smooth.

Step 2: Mark the Drill Points

Take your mounting bracket and hold it up to the wall. Use a pencil to mark the screw holes through the bracket’s openings. This ensures your holes will line up perfectly.

• Double-check with a level. A crooked mount = a crooked camera = a crooked view.
• If your brick is uneven (common in older homes), try to align the bracket with the mortar lines instead of the brick faces. Mortar is softer and easier to drill into.
• Use masking tape over each mark. It helps prevent the drill bit from “walking” and reduces surface chipping.

Warning: Drilling directly into brick can cause cracking. Mortar is your friend—it’s more forgiving and still holds strong.

This step sets the stage for a clean, professional-looking install. Don’t rush it.

Step 3: Drill the Pilot Holes

Now it’s time to drill. This is where many people go wrong—using the wrong bit or the wrong technique.

• Insert a carbide-tipped masonry bit (5/32” or 1/4”) into your hammer drill.
• Set the drill to “hammer mode” if available. This combines rotation with a pounding action—perfect for breaking through masonry.
• Hold the drill straight and steady. Apply light pressure—let the hammer do the work.
• Drill to a depth of 1.5 to 2 inches. That’s usually enough for most anchors.

Pro Tip: Drill slowly at first to start the hole. Once it’s set, increase speed slightly. Going too fast can overheat the bit or crack the brick.

After each hole, use a vacuum or brush to clear out the dust. A clean hole = better anchor grip. This is a crucial part of your how to mount Arlo camera on brick in 2026 easy guide—don’t skip it.

Step 4: Insert the Wall Anchors

Now that your holes are drilled, it’s time to add the anchors. I recommend Tapcon concrete screws—they’re reliable, widely available, and hold up to 100+ lbs in solid brick.

• Insert the anchor into the hole. Tap it in with a hammer if needed—just don’t go too deep.
• For plastic anchors, gently tap them flush with the wall. For Tapcons, leave the screw head exposed so you can attach the bracket.
• If the anchor feels loose, try a larger size or switch to a chemical anchor (like Loctite PL S30). But for most homes, Tapcons are perfect.

Personal Note: I once used a cheap anchor from a discount store. It held for two weeks, then the camera fell during a storm. Never again. Invest in quality hardware.

This step ensures your Arlo won’t budge—even in high winds or minor bumps.

Step 5: Attach the Mounting Bracket

With the anchors in place, it’s time to mount the bracket.

• Line up the bracket with the holes.
• Insert the screws (usually included with Tapcons) and tighten by hand first.
• Use a screwdriver or drill on low torque to secure the screws. Don’t over-tighten—this can strip the anchor or crack the brick.
• Double-check with your level. Adjust if needed before fully tightening.

Once the bracket is secure, give it a gentle tug. It should feel rock-solid. This is the heart of your how to mount Arlo camera on brick in 2026 easy guide—a stable base means a reliable camera.

Step 6: Mount the Arlo Camera

Now for the fun part: attaching the camera itself.

• Most Arlo models use a magnetic or twist-lock base. Simply snap the camera into place.
• For magnetic mounts, ensure the magnet clicks in securely. Give it a light pull to test.
• For twist-lock models (like Arlo Ultra), rotate the camera until it locks with an audible click.
• Adjust the angle so the lens points where you want it. Use the Arlo app to preview the view.

Pro Tip: Use the Arlo app’s “Live View” to check the camera’s angle before finalizing. I’ve caught many blind spots this way.

You’re almost there! Just one more step to ensure everything works.

Step 7: Test and Fine-Tune

Don’t just assume it’s working—test it!

• Open the Arlo app and connect to your camera.
• Check for a clear image, motion detection, and night vision.
• Walk into the camera’s field of view to test motion alerts.
• If the image is blurry, adjust the focus (on models that allow it) or reposition slightly.
• For battery-powered models, check battery level and charging status.

This final step ensures your how to mount Arlo camera on brick in 2026 easy guide delivers real value—not just a mounted camera, but a fully functional security tool.

Pro Tips & Common Mistakes to Avoid

Let’s talk about the stuff you won’t find in the manual—but wish you had known before starting.

• Drilling into brick vs. mortar: Mortar is easier to drill and less likely to crack. But if you must drill into brick, go slow and use a sharp bit. Avoid the edges—they’re weak.
• Don’t skip the level: A crooked camera might still work, but it looks unprofessional and could miss key areas.
• Battery vs. wired: If you’re using a battery-powered Arlo (like Essential), consider a solar panel for continuous charging. No more climbing ladders every few weeks.
• Weatherproofing: Even weather-resistant cameras can suffer over time. Use silicone sealant around the mounting screws if you’re in a rainy climate. Just don’t seal the camera itself!
• Use the app during setup: The Arlo app has a “Mounting Assistant” feature that helps you aim the camera perfectly. Use it!

Common Mistake: People often mount cameras too close to the ground or near bright lights, causing glare or false motion alerts. Aim for 7–8 feet and away from streetlights.

Personal Story: I once mounted an Arlo near a motion-activated light. Every time the light turned on, the camera recorded a “motion event.” I had to adjust the angle by just 15 degrees to fix it. Small tweaks make a big difference.

These insights come from real-world experience—not theory. Apply them, and your install will last for years.

FAQs About How to Mount Arlo Camera on Brick in 2026 Easy Guide

Q: Can I mount Arlo on brick without drilling?
A: Technically, yes—but it’s not recommended. You could use heavy-duty outdoor adhesive strips (like 3M VHB), but they’re not as secure. Wind, temperature changes, and vibrations can loosen them over time. Drilling with proper anchors is the only reliable method for long-term security.

Q: What if my brick is crumbling or old?
A: If the brick is soft or cracked, avoid drilling into it. Instead, use a mortar line or switch to a surface mount (like a metal bracket that attaches to the side of the house). You can also use a chemical anchor, which bonds to weak masonry better than mechanical anchors.

Q: Do I need a hammer drill for brick?
A: Yes, ideally. A regular drill can work, but it’s slow and hard on the motor. A hammer drill uses impact to break through masonry efficiently. If you don’t own one, rent it from a hardware store for $20/day.

Q: Can I use the same method for Arlo Ultra 2 or Pro 5?
A: Absolutely. All Arlo cameras use similar mounting brackets. The process is identical—just ensure you’re using the correct bracket that came with your model. Some newer models have magnetic mounts, but the base attachment to the wall is the same.

Q: How long does the whole process take?
A: About 30–45 minutes for one camera if you’re prepared. First-timers might take an hour. The drilling and anchoring are the most time-consuming—setup and testing are quick.

Q: What if I hit a metal stud or rebar behind the brick?
A: It’s rare, but possible in older homes. If your drill suddenly stops or sparks fly, stop immediately. You’ve hit something hard. Reposition the mount by 1–2 inches and try again. Use a stud finder with metal detection if you’re unsure.

Q: Can I remove the mount later without damaging the brick?
A: Yes. Unscrew the bracket, then remove the anchors. For Tapcon screws, they can be backed out with a screwdriver. For plastic anchors, you can leave them in or fill the hole with mortar or exterior-grade caulk. The damage is minimal—just a few small holes.

Final Thoughts

Mounting an Arlo camera on brick might seem intimidating at first, but once you break it down, it’s really just a series of simple, logical steps.

Remember: how to mount Arlo camera on brick in 2026 easy guide isn’t about perfection—it’s about doing it right the first time. Use quality anchors, drill carefully, test your view, and don’t rush the process.

Your home’s security is worth the effort. A well-mounted Arlo camera can deter break-ins, monitor deliveries, and give you peace of mind—whether you’re home or away.

So grab your tools, take a deep breath, and get to work. And if you ever feel stuck? Revisit this guide. I’ve been there, done that, and learned the hard way—so you don’t have to.

Happy mounting—and stay safe!

“`