Mounting an Arlo camera on a brick wall in 2026 is quick and secure with the right tools and technique. Use a masonry drill bit and anchors to ensure a stable installation, then attach the camera mount using the included screws for a weatherproof, long-lasting hold. Always check for hidden wires or pipes before drilling to avoid damage and ensure optimal camera positioning.

How to Mount Arlo Camera on Brick Wall in 2026 Easy Guide

Key Takeaways

• Use masonry anchors: Ensure secure mounting on brick with heavy-duty anchors.
• Mark drill points: Locate studs and mark spots before drilling for accuracy.
• Choose right drill: Use a hammer drill for clean, efficient brick penetration.
• Weatherproof connections: Seal wire junctions to protect against moisture damage.
• Test camera angle: Adjust positioning before finalizing to capture ideal view.
• Follow instructions: Adhere to Arlo’s guidelines for warranty and safety compliance.

Why This Matters / Understanding the Problem

So, you’ve got your shiny new Arlo camera, and you’re ready to keep an eye on your home. But then you realize: your house is built with brick. And now you’re staring at that textured, hard surface, wondering, “How the heck do I mount this thing?”

You’re not alone. Many homeowners face this exact challenge. Mounting a camera on brick isn’t like sticking it to drywall or siding. Brick is tough—dense, uneven, and unforgiving. If you use the wrong tools or skip key steps, you could end up with a camera that wobbles, falls, or damages your wall.

That’s why learning how to mount Arlo camera on brick wall in 2026 easy guide is essential. This guide walks you through the process—safely, securely, and without turning your brick into Swiss cheese. Whether you’re protecting your front porch, backyard, or garage, this method works for most Arlo models (Pro, Ultra, Essential, etc.).

And don’t worry—this isn’t a dry technical manual. I’ve done this myself on my 1950s brick home, and I’ll share what worked, what didn’t, and how to avoid the rookie mistakes I made.

What You Need

Before you start, gather your tools. You don’t need a full workshop, just a few basics. Here’s what I used—and recommend:

• Arlo camera and mounting kit (most come with screws and a plastic anchor—but we’ll upgrade those)
• Drill with hammer function (a regular drill won’t cut it on brick)
• Masonry drill bit (5/16” or 8mm) – this is critical for clean, accurate holes
• Wall anchors (masonry type, plastic or metal) – I prefer the Tapcon-style or red plastic anchors for brick
• Level – because nobody likes a crooked camera
• Pencil – for marking drill points
• Masking tape – prevents drill bit from slipping on smooth brick
• Screwdriver or drill bit for screws – usually Phillips head
• Vacuum or brush – to clean dust from holes
• Optional: Stud finder with masonry mode – helps locate mortar lines or avoid weak spots

Pro Tip: Don’t rely on the plastic anchors that come in the Arlo box. They’re great for drywall but often fail on brick. Invest in proper masonry anchors—they’re cheap and worth every penny.

Once you’ve got everything, pick a spot. Look for a flat brick surface (not mortar), away from direct rain, and with a clear view of your target area. And remember: this guide for how to mount Arlo camera on brick wall in 2026 easy guide assumes you’re using the standard Arlo mounting bracket. If you’re using a third-party mount, the principles are the same, but check compatibility.

Step-by-Step Guide to How to Mount Arlo Camera on Brick Wall in 2026 Easy Guide

Step 1: Choose the Right Spot (And Double-Check It)

First, pick where you want the camera. Think about:

• Field of view – Can it see the front door, driveway, or backyard?
• Wi-Fi signal – Test your phone’s signal at the spot. Arlo needs at least 2-3 bars.
• Sun and rain exposure – Avoid direct midday sun (can cause glare) and overhangs that drip water.
• Brick vs. mortar – Always drill into brick, never mortar. Mortar crumbles and won’t hold.

Once you’ve picked a spot, hold the Arlo mounting bracket up to the wall. Use a level to make sure it’s straight. Then, mark the two screw holes with a pencil.

Pro Tip: If you’re unsure, use a small piece of masking tape over the mark. It helps prevent the drill bit from “walking” on the hard brick surface.

This step is crucial for how to mount Arlo camera on brick wall in 2026 easy guide—a crooked mount leads to a crooked camera, which ruins your view and looks unprofessional.

Step 2: Drill Pilot Holes (The Right Way)

Now, grab your drill and masonry bit. Set your drill to hammer mode—this is non-negotiable. Brick requires impact to break through, and regular drilling just spins the bit without cutting.

• Place the drill tip on your pencil mark (with masking tape if used).
• Start slow. Apply steady, firm pressure—don’t push too hard.
• Drill to a depth of about 1.5 to 2 inches. Most anchors need this depth to grip securely.

You’ll hear a loud, rhythmic pounding—that’s normal. But if the drill feels like it’s slipping, stop and reposition. A wobble can ruin the hole.

Once the hole is drilled, blow or vacuum out the dust. A clean hole means the anchor will seat properly.

Warning: Never drill into mortar. It’s weaker than brick and will crumble under pressure. If your marks fall on mortar, move the bracket slightly to hit brick.

Repeat for the second hole. Use the level again to ensure both holes are aligned horizontally. This step is a cornerstone of how to mount Arlo camera on brick wall in 2026 easy guide—precision here prevents headaches later.

Step 3: Insert Masonry Anchors

Now, gently tap the masonry anchors into each hole. Use a hammer if needed, but don’t force them. They should go in snugly, with the top flush or slightly below the brick surface.

• Plastic anchors: Push in with your finger, then tap lightly.
• Metal Tapcon-style anchors: Use a hammer and tap until seated.

Once both anchors are in, double-check they’re secure. Give them a gentle wiggle. If they move, the hole may be too big—remove and use a larger anchor.

Pro Tip: I like red plastic anchors for most Arlo mounts. They’re affordable, easy to install, and hold up well in outdoor conditions. For heavy-duty use (like Arlo Ultra), I go with metal.

This step ensures your camera stays put—even in wind or if someone bumps it.

Step 4: Attach the Mounting Bracket

Now, align the Arlo mounting bracket with the anchors. Line up the screw holes.

• Insert the screws (usually included with the Arlo kit).
• Use a screwdriver or drill on low torque to avoid stripping the anchor.
• Tighten until the bracket is flush with the wall—don’t over-tighten.

Once both screws are in, give the bracket a firm shake. It should feel solid, not wobbly.

Use your level again to confirm it’s still straight. Brick can shift slightly during drilling, so this check is important.

Common Mistake: Over-tightening screws. It’s tempting to crank them down, but you can crack the anchor or strip the threads. Stop when the bracket is secure.

This is where your how to mount Arlo camera on brick wall in 2026 easy guide pays off—a solid bracket means a stable camera.

Step 5: Install the Arlo Camera

Now the fun part: attaching the camera.

• Slide or snap the Arlo camera into the bracket. Most models use a twist-lock or slide-in mechanism.
• Check the app to see if the camera connects and shows a clear image.
• Adjust the angle by loosening the bracket slightly, tilting, then re-tightening.

For Arlo Pro or Ultra, you might need to connect the power cable. Use weatherproof cable clips to secure it along the wall, avoiding sharp bends.

Pro Tip: If you’re using solar, position the panel in direct sunlight. I mounted mine on a separate bracket nearby—angled south (in the northern hemisphere) for max sun exposure.

Test the camera’s view. Make sure it covers the area you want. Adjust if needed.

Step 6: Weatherproof and Secure

Brick is durable, but water can seep into holes over time. To protect your setup:

• Apply a small dab of clear silicone sealant around the screw heads (not on the threads—just the top).
• Use rubber gaskets or washers if your Arlo kit includes them.
• For outdoor cables, use UV-resistant conduit or flexible raceway to protect against sun and rain.

This step is often skipped, but it’s vital for longevity. I learned this the hard way—after a rainy season, my first camera had water damage because I didn’t seal the screws.

Warning: Don’t use caulk or sealant on the camera lens or vents. It can trap moisture and damage internal components.

With this, your how to mount Arlo camera on brick wall in 2026 easy guide is nearly complete. You’ve built a setup that’s secure, weather-resistant, and ready for years of use.

Step 7: Final Check and App Setup

Now, open the Arlo app. Make sure:

• The camera is online and streaming.
• Motion detection is working (test by walking in front).
• Night vision and audio are clear.
• Notifications are set up (if you want alerts).

Adjust motion zones if needed. I like to exclude trees or bushes that sway in the wind—fewer false alarms.

Finally, take a photo of your setup. It’s helpful for future reference or if you need to remove the camera later.

Pro Tips & Common Mistakes to Avoid

After mounting cameras on three brick homes, I’ve learned a few things the hard way. Here’s my insider advice:

• Use a laser level for multiple cameras. If you’re installing more than one, a laser level ensures they’re all aligned. I used a $20 tool from Amazon—saved me hours of rework.
• Drill slowly in old brick. Vintage brick (pre-1970s) can be brittle. Use low speed and light pressure to avoid cracking.
• Check for hidden utilities. Before drilling, use a stud finder with a metal scan mode to avoid hitting pipes or wires. I once hit a water line—lesson learned.
• Don’t mount too high. Arlo cameras work best at 7–10 feet. Too high, and you miss facial details. Too low, and it’s vulnerable to tampering.
• Label your holes. If you need to remove the camera later, knowing the anchor type helps you choose the right removal tool.

Common Mistake #1: Skipping the pilot hole. Some people try to drive anchors directly into brick. It doesn’t work. You need a clean hole for proper grip.

Common Mistake #2: Ignoring Wi-Fi signal. Brick walls can block signals. Test with your phone first. If weak, consider a range extender or mesh Wi-Fi system.

Common Mistake #3: Forgetting to seal. I’ve seen cameras fail after 2 years because water seeped into the mounting hole and corroded the screws. A tiny dab of silicone prevents this.

These tips are part of the how to mount Arlo camera on brick wall in 2026 easy guide that separates a quick job from a professional-grade installation.

FAQs About How to Mount Arlo Camera on Brick Wall in 2026 Easy Guide

Here are the questions I get most often—answered honestly, from experience.

Can I use regular screws and anchors on brick?

Short answer: No. Regular drywall anchors are useless on brick. They’ll either not fit or fall out. Masonry anchors are designed to expand inside the hole, gripping the brick. I’ve tested both—masonry anchors win every time. Stick with them for a secure how to mount Arlo camera on brick wall in 2026 easy guide.

Do I need to drill into the mortar instead?

Absolutely not. Mortar is softer and crumbles under pressure. It won’t hold a screw. Always drill into the brick itself. If your bracket lands on mortar, shift it slightly to hit solid brick. Trust me, I tried mortar once—the anchor pulled out after a week.

What if my brick is painted?

No problem. Just clean the area with a damp cloth to remove dust. Drill as usual—the paint won’t affect the anchor’s grip. I’ve mounted on painted brick with no issues. Just be careful not to chip the paint too much.

Can I use adhesive instead of drilling?

Adhesive (like heavy-duty tape or glue) might work for lightweight cameras, but I don’t recommend it for brick. Brick is porous and uneven, so adhesive doesn’t bond well. Plus, outdoor weather (rain, sun, temperature swings) weakens it over time. Drilling is the only reliable method for a long-term how to mount Arlo camera on brick wall in 2026 easy guide.

How do I remove the camera later without damaging the wall?

Easy. Unscrew the bracket. Then, use pliers to grip the anchor and pull it out. If it’s stuck, drill a small hole next to it to release pressure. To patch the hole, use masonry filler or a brick-colored caulk. It won’t be invisible, but it’ll be secure.

Will this work on stone or concrete?

Yes! The same steps apply. Stone and concrete are similar to brick—hard, dense, and require masonry bits and anchors. Just make sure your drill has enough power. I’ve used this method on a concrete garage wall with perfect results.

My camera is loose after a few months. What went wrong?

Likely causes:

• You used the wrong anchor (e.g., drywall anchor).
• The hole was too big or dirty.
• You over-tightened and cracked the anchor.
• The brick itself is damaged (common in older homes).

Solution: Remove the bracket, clean the hole, and install a larger anchor. If the brick is cracked, consider a surface-mounted base or relocating the camera.

Final Thoughts

Mounting an Arlo camera on a brick wall isn’t rocket science—but it does require care, the right tools, and a few smart tricks. The how to mount Arlo camera on brick wall in 2026 easy guide isn’t just about getting it up fast. It’s about doing it right, so it stays up for years.

Remember: choose the right spot, drill into brick (not mortar), use masonry anchors, and seal the screws. Test your Wi-Fi, adjust the view, and protect against weather. And don’t skip the level—your future self will thank you.

I’ve used this method on my own home, and my cameras have survived storms, wind, and even a curious squirrel. They’re still rock-solid after two years.

So grab your drill, follow these steps, and give your home the security it deserves. And if you hit a snag? Take a breath. Every pro installer started where you are now. You’ve got this.

Now go make your brick wall proud.