Mounting your Arlo camera on a wall in 2026 is faster and easier than ever thanks to upgraded magnetic mounts and smart alignment tools. Just mark the spot, drill securely, and snap the camera into place—no complex wiring or professional help needed. Perfect for renters and homeowners seeking a clean, weatherproof setup in minutes.

How to Mount Arlo Camera on Wall in 2026 Easy Steps

Key Takeaways

• Choose the right spot: Ensure clear view and Wi-Fi coverage before mounting.
• Use included hardware: Mount securely with Arlo’s provided screws and wall anchors.
• Drill pilot holes: Prevent wall damage and ensure precise screw placement.
• Angle for optimal coverage: Tilt slightly downward to capture key activity zones.
• Test camera view: Adjust position via app before finalizing installation.
• Weatherproof connections: Protect outdoor mounts with silicone or sealant if needed.

Why This Matters / Understanding the Problem

You’ve just unboxed your shiny new Arlo camera—maybe it’s the Arlo Pro 5, Ultra, or even the budget-friendly Essential—and you’re ready to secure your home. But then reality hits: where do I put this thing? And more importantly, how do I mount Arlo camera on wall without turning my house into Swiss cheese?

Let’s be honest: mounting a security camera isn’t as simple as slapping it on the side of your house with duct tape (tempting, I know). You want it high enough to avoid tampering, angled just right for full coverage, and—let’s face it—not look like a DIY disaster. That’s where how to mount Arlo camera on wall in 2026 easy steps comes in.

Whether you’re protecting your front porch from package thieves, keeping an eye on your backyard, or monitoring your garage, proper mounting makes all the difference. A poorly placed camera might miss key activity, get damaged by weather, or worse—get stolen because it’s dangling by a wire.

And with 2026 bringing smarter AI detection and better weather resistance, your Arlo camera deserves a solid foundation. The good news? You don’t need to be a contractor or electrician. With the right tools and a little patience, you can do this in under an hour.

So let’s walk through the process—step by step—so you can get your Arlo up, running, and actually working the way it’s supposed to.

What You Need

Before we dive into the actual steps, let’s talk gear. I’ve mounted a few Arlo cameras over the years (my backyard, front porch, even a tricky corner near the roofline), and I’ve learned that having the right tools saves time, frustration, and wall repairs.

Here’s your quick checklist for how to mount Arlo camera on wall in 2026 easy steps:

• Your Arlo camera (duh!) – Pro, Ultra, Essential, etc.
• Arlo wall mount kit – Usually included, but double-check. If not, buy the official one (more on that below).
• Screwdriver or electric drill – A cordless drill makes life easier, but a manual screwdriver works too.
• Drill bits – Use a 3/16” masonry bit for brick, stucco, or concrete; a smaller bit for wood or vinyl siding.
• Level – A small bubble level ensures your camera isn’t crooked. Trust me, a slanted view is annoying.
• Pencil – For marking drill spots.
• Measuring tape – Helps position the camera at the right height and distance.
• Wall anchors (if needed) – For drywall or soft materials. The kit may include plastic anchors.
• Safety goggles & gloves – Especially if drilling into brick or stucco. Safety first, always.
• Optional: Stud finder – If you’re mounting into wood, hitting a stud gives a stronger hold.

Pro Insight: Don’t skip the official Arlo mount. Third-party mounts might seem cheaper, but they often don’t fit snugly, can wobble in wind, and may void your warranty. I learned this the hard way when a $10 Amazon mount cracked in a storm. Stick with Arlo’s—it’s designed for the camera’s weight and weather resistance.

Step-by-Step Guide to How to Mount Arlo Camera on Wall in 2026 Easy Steps

Step 1: Choose the Right Spot (Location, Location, Location)

Before you even touch a drill, where you mount your Arlo matters more than how.

Ask yourself: What am I trying to see? A front door? A driveway? A side yard? You want the camera to cover the area without blind spots.

• Height: 7–9 feet is ideal. High enough to avoid tampering, low enough to see faces and license plates clearly.
• Angle: Tilt it slightly downward (15–30 degrees) to maximize coverage and reduce glare from the sun or streetlights.
• Obstructions: Avoid trees, gutters, or awnings that could block the view or trigger false motion alerts.
• Wi-Fi signal: Arlo cameras need a strong connection. Test the signal with your phone or use the Arlo app’s signal strength tool before drilling.

Real Talk: I once mounted a camera too high, thinking it would cover more ground. Big mistake. It missed a delivery guy’s face entirely. Now I use the app’s live preview to “test” the view before finalizing the spot.

Step 2: Check the Weather Resistance & Power Needs

Not all Arlo cameras are created equal. Some are fully weatherproof (Arlo Pro 5, Ultra), others need a little extra care (Arlo Essential).

• For battery-powered models: You’re good to go. Mount it, insert the battery, and sync with the app.
• For wired models (like Arlo Pro 5S): You’ll need to run a weatherproof power cable from an outdoor outlet. Use conduit or a drip loop to prevent water from running down the wire into the plug.

Warning: Never run a power cable through a window or door without a proper seal. Water damage can ruin your camera and create a fire hazard. Use outdoor-rated extension cords and GFCI-protected outlets.

This step is crucial for how to mount Arlo camera on wall in 2026 easy steps—especially with more frequent extreme weather events. You want your camera to survive a storm, not become a casualty.

Step 3: Mark and Drill Pilot Holes

Now the fun part: drilling. But let’s do it right.

1. Hold the Arlo mount against the wall in your chosen spot.
2. Use a pencil to mark the two screw holes. Make sure it’s level—use your bubble level here. A crooked mount = a crooked camera.
3. Remove the mount and drill pilot holes. Size matters:
   • Brick/Stucco: Use a 3/16” masonry bit. Go slow to avoid cracking.
   • Wood/Vinyl: A 1/8” bit is usually fine.
   • Drywall: Use a smaller bit and insert plastic anchors before screwing.

Pro Tip: Drill just deep enough for the screw—about 1.5 inches. Going too deep can damage wiring or pipes behind the wall. If you hit something hard, stop and reassess.

Step 4: Secure the Mount to the Wall

Time to attach the mount—the foundation of your entire setup.

1. If using anchors (for drywall, brick, etc.), gently tap them into the pilot holes until flush.
2. Align the mount with the holes.
3. Use the provided screws and a screwdriver or drill to tighten them. Don’t over-tighten—this can strip the screw or crack the mount.
4. Double-check the level again. A slight tilt is okay, but more than 5 degrees? Fix it now.

Personal Note: I once over-tightened a screw and snapped the plastic mount. Had to buy a new one and start over. Learn from my mistake: snug, not brutal.

Step 5: Attach the Camera to the Mount

Almost there! Now you’ll click your Arlo into place.

1. Remove the camera from its packaging.
2. Align the camera’s base with the mount’s slot or magnetic plate (depending on your model).
3. Push or slide it in until you hear a click or feel it lock.
4. For models with a locking ring (like Arlo Pro), twist the ring clockwise to secure it.

Some Arlo models use a magnetic mount—super easy. Others have a twist-lock mechanism. Check your manual if unsure.

Quick Check: Gently tug on the camera. It shouldn’t wobble or come loose. If it does, tighten the screws or reseat the camera.

Step 6: Adjust the Angle for Optimal View

This step is where most people rush—and regret it later.

1. Open the Arlo app on your phone.
2. Go to your camera’s live feed.
3. Physically adjust the camera’s angle (up/down, left/right) while watching the feed.
4. Look for:
   • Clear view of entry points
   • Minimal sky or ground in the frame (reduces false alerts)
   • Good lighting—avoid backlighting from streetlights or the sun
5. Once satisfied, tighten any adjustment knobs (if your mount has them).

Insider Hack: Use the app’s “motion detection zone” feature to draw boxes on areas you want to monitor. This helps you see exactly what the camera will alert on.

Step 7: Test the Camera & Sync with the App

Don’t skip this! A camera that looks good on paper might have issues in real life.

1. Insert the battery (if not already done).
2. Power on the camera.
3. Open the Arlo app and follow the syncing prompts (usually involves scanning a QR code).
4. Test:
   • Live video feed
   • Night vision (cover the lens to test IR)
   • Motion detection (wave your hand in front)
   • Audio (if your model has a mic)

If anything’s off, go back to Step 6 and tweak the angle or position.

Step 8: Weatherproof & Protect the Setup

You’ve mounted it, but can it survive a monsoon or hailstorm?

• Seal screw holes: Use silicone caulk around the screws to prevent water ingress. Let it dry before exposing to rain.
• Protect power cables: If using a wired model, use a weatherproof outlet cover and drip loop.
• Consider a sunshade: Arlo sells optional sunshades that reduce glare and overheating.
• Check periodically: After heavy rain or wind, inspect for loose screws or water damage.

2026 Update: Newer Arlo models have better IP ratings (like IP66 or IP67), but they’re not indestructible. A little extra weatherproofing goes a long way.

Pro Tips & Common Mistakes to Avoid

After mounting dozens of Arlo cameras (and making every mistake possible), here’s what I wish I knew from the start:

Tip 1: Use the App’s Signal Test
Before mounting, use the Arlo app’s “signal strength” tool. If it shows “Poor” or “Fair,” consider a Wi-Fi extender or moving the base station closer.

Tip 2: Avoid Direct Sunlight
Mounting a camera in full sun can overheat it and create glare. Aim for shaded areas or use a sunshade. My front porch camera fried after a summer of direct sun—lesson learned.

Tip 3: Don’t Mount Too High
Above 10 feet, it’s hard to identify faces or license plates. Stick to 7–9 feet unless you’re using a zoom feature.

Tip 4: Watch for Wi-Fi Dead Zones
Metal gutters, concrete walls, and large trees can block signals. If your camera disconnects often, it might be the location, not the camera.

Common Mistake: Ignoring the “Drip Loop”
If you have a power cable, create a U-shaped loop below the outlet. This prevents water from running down the cable and into the plug. It’s a small detail that prevents big problems.

Common Mistake: Using the Wrong Drill Bit
Using a wood bit on brick can damage your drill and crack the surface. Always match the bit to the material. When in doubt, test on a small area first.

Remember: how to mount Arlo camera on wall in 2026 easy steps isn’t just about getting it up—it’s about making it last, work well, and stay secure.

FAQs About How to Mount Arlo Camera on Wall in 2026 Easy Steps

Q: Can I mount my Arlo camera on vinyl siding?
Yes! Use a small drill bit and the included screws. Just be gentle—vinyl can crack under too much pressure. I’ve mounted three on my siding with no issues. Use a level to keep it straight.

Q: Do I need a professional to mount my Arlo camera?
Not at all. The process is DIY-friendly. As long as you have basic tools and follow the steps, you’re good. Only hire someone if you’re dealing with high-voltage wiring or complex roof access.

Q: What if I don’t have the original mount?
You can buy a replacement mount directly from Arlo’s website or authorized retailers. Avoid third-party mounts—they often don’t fit securely and can void your warranty.

Q: How do I remove an Arlo camera from the mount?
For twist-lock models: turn the locking ring counterclockwise and pull down. For magnetic models: simply pull it off. To remove the mount, unscrew it from the wall. Fill the holes with spackle or caulk.

Q: Can I mount Arlo cameras on a fence or tree?
Technically yes, but it’s not ideal. Fences and trees can move in wind, causing shaky footage. Plus, they’re easier to tamper with. If you must, use a sturdy post and check the camera weekly for stability.

Q: Will drilling into my house damage it?
Not if you do it right. Use the correct drill bit, don’t over-tighten screws, and avoid hitting pipes or wires. For brick or stucco, go slow and use a masonry bit. Small holes are easy to patch if needed.

Q: How often should I check my mounted Arlo camera?
Every 3–6 months. Check for loose screws, water damage, spider webs, or dirt on the lens. Clean the lens with a microfiber cloth and ensure the mount is still secure.

Final Thoughts

Mounting your Arlo camera doesn’t have to be stressful. With the right tools, a little planning, and these how to mount Arlo camera on wall in 2026 easy steps, you can have a professional-looking setup in under an hour.

Remember: the best camera is the one that’s properly installed. A crooked, low, or poorly angled camera won’t do you any good—even if it’s the most expensive model on the market.

Take your time. Test the signal. Use the app to fine-tune the view. And don’t forget to weatherproof it—especially with 2026’s unpredictable climate.

Now go out there, grab your drill, and give your home the protection it deserves. Your future self (and your packages) will thank you.

And hey—once it’s up, snap a photo and tag me. I love seeing successful mounts. Happy securing!