Mounting an Arlo camera to stucco in 2026 is quick and secure when you use the right tools and techniques. Drill pilot holes with a masonry bit, insert plastic anchors, and use stainless steel screws to ensure a durable hold that won’t crack or loosen over time. This method guarantees a professional, weather-resistant installation—perfect for protecting your home with confidence.

“`html

How to Mount Arlo Camera to Stucco in 2026 Easy Guide

Key Takeaways

• Use a masonry bit: Drill pilot holes in stucco to prevent cracking during installation.
• Anchor screws securely: Choose plastic or metal anchors for a stable, long-lasting mount.
• Seal all gaps: Apply silicone caulk to block moisture and prevent damage.
• Check camera angle: Test view before final tightening to ensure optimal coverage.
• Use a stud finder: Locate studs behind stucco for extra support if needed.
• Follow Arlo’s guide: Adhere to manufacturer instructions for warranty compliance and safety.

Why This Matters / Understanding the Problem

So, you’ve got your hands on an Arlo camera—great choice! These sleek, wireless security cameras are perfect for keeping an eye on your home. But here’s the catch: mounting them on stucco? That’s a whole different ballgame.

Stucco is a tough, textured material that’s common in many homes, especially in warmer climates. Unlike wood or brick, it’s not the easiest surface to work with. Drilling into stucco without cracking it or damaging the camera’s mount? That’s where most people trip up. But don’t worry—I’ve been there, done that, and cracked more than a few stucco walls (oops!). With this How to Mount Arlo Camera to Stucco in 2026 Easy Guide, you’ll learn how to do it right the first time.

Whether you’re a DIY newbie or a seasoned pro, this guide breaks down the process into simple, actionable steps. We’ll cover everything from choosing the right tools to avoiding common pitfalls—all while keeping your stucco intact and your Arlo camera secure.

What You Need

Before we dive in, let’s make sure you’ve got everything you need. Trust me, skipping this step can lead to frustration (and maybe a trip back to the hardware store). Here’s your checklist:

• Arlo camera and mount (obviously!)
• Power drill (preferably cordless for ease of use)
• Masonry drill bits (5/32″ or 3/16″ for pilot holes; 1/4″ for anchors)
• Plastic wall anchors (stucco-friendly, like Tapcon or sleeve anchors)
• Screws (usually included with the Arlo mount, but double-check)
• Measuring tape (for precise placement)
• Pencil or marker (for marking drill points)
• Level (to avoid a crooked camera)
• Safety glasses (stucco dust is no joke)
• Vacuum or brush (to clean up dust)
• Optional but helpful: Stud finder (if you’re near an edge or want extra stability)

Pro tip: If you’re unsure about the drill bits, ask at the hardware store. Stucco is a mix of cement, sand, and lime, so you need bits designed for masonry, not wood or drywall.

Step-by-Step Guide to How to Mount Arlo Camera to Stucco in 2026 Easy Guide

Alright, let’s get to the fun part—mounting your Arlo camera like a pro. Follow these steps, and you’ll have it up and running in no time.

Step 1: Choose the Perfect Spot

First things first: where should your Arlo go? Think about what you’re trying to monitor. A front door? A backyard gate? A side alley?

Here’s what to look for:

• Field of view: Make sure the camera covers the area you want to watch, without blind spots.
• Wi-Fi signal: Arlo cameras rely on Wi-Fi, so test the signal strength with your phone first. No one wants a camera that disconnects every time.
• Sunlight and weather: Avoid direct sunlight (it can cause glare) and spots where water might collect (like under a leaky gutter).

Once you’ve picked the spot, use your measuring tape and level to mark the exact position. A crooked camera is just… sad.

Step 2: Mark the Drill Points

Now, hold the Arlo mount against the stucco where you want it. Use your pencil to mark the two screw holes (usually on the top and bottom of the mount). Double-check with the level—again, no one likes a lopsided camera.

Here’s a little trick: If your stucco has a rough texture, press the mount firmly against it to leave clear marks. If the texture is too bumpy, use a small piece of tape to hold the mount in place while you mark.

Step 3: Drill the Pilot Holes

This is where things get real. Grab your power drill and the masonry bit (start with the smaller 5/32″ or 3/16″ bit). Here’s how to do it right:

1. Put on your safety glasses. Stucco dust is gritty and can irritate your eyes.
2. Start drilling slowly at first, using light pressure. You’re just making a guide hole, not going full speed.
3. Once the bit bites into the stucco, increase speed slightly but keep it steady. Don’t force it—let the bit do the work.
4. Drill about 1.5 inches deep (enough for the anchor and screw).

Warning: Stucco is brittle, so if you hear a crack, stop immediately. You might have hit a weak spot. Try a new spot or use a shorter anchor.

Step 4: Insert the Wall Anchors

Now, take your plastic wall anchors and gently tap them into the pilot holes. Use a hammer if needed, but be careful—stucco can chip if you hit it too hard.

Once the anchors are flush with the stucco, give them a wiggle to make sure they’re snug. If they’re loose, you might need a slightly larger anchor or a dab of construction adhesive (but that’s a last resort).

Step 5: Attach the Mount

With the anchors in place, line up the Arlo mount and screw it in. Use the screws provided with the mount (or the ones you bought separately). Tighten them by hand first, then use the drill on low torque to avoid stripping the screws or cracking the stucco.

Key tip: Don’t overtighten! Stucco is fragile, and too much pressure can cause cracks. When the screws feel snug, stop.

Step 6: Mount the Arlo Camera

Now for the easy part—attaching the camera. Most Arlo models have a magnetic base, so you just snap it onto the mount. Give it a gentle tug to make sure it’s secure.

Adjust the angle so it’s pointing exactly where you want it. Arlo cameras have a wide field of view, but you still want to minimize blind spots. Use the Arlo app to check the live feed and tweak the position if needed.

Step 7: Test and Secure

Before you call it a day, test the camera:

• Open the Arlo app and verify the video feed is clear and stable.
• Check for any blind spots or obstructions (like branches or gutters).
• Make sure the camera doesn’t wobble when you touch it. If it does, tighten the screws slightly.

Once everything looks good, clean up the stucco dust with a vacuum or brush. A little maintenance now can prevent bigger issues later.

Pro Tips & Common Mistakes to Avoid

Let’s talk about the stuff they don’t always tell you. These tips come from years of trial and error—and a few cracked stucco walls.

Pro Tip #1: Use a stud finder if possible. If your mount is near a wooden frame, drilling into the stud (not just the stucco) adds extra stability. Just avoid the stucco layer itself—it’s too brittle.

Pro Tip #2: If your stucco is old or crumbly, use a dab of silicone caulk around the anchor before inserting it. It helps seal the hole and prevents future cracking.

Pro Tip #3: For high-traffic areas (like a front door), consider using a metal anchor instead of plastic. It’s overkill for most setups, but it’s worth it for heavy-duty use.

Now, the mistakes I’ve made (so you don’t have to):

• Using the wrong drill bit: Wood bits will just skate over stucco. Always use masonry bits.
• Skipping the pilot hole: Drilling directly into stucco without a pilot hole is a recipe for cracks. Always start small.
• Overtightening the screws: I’ve cracked stucco by being too eager. Snug is good; tight is dangerous.
• Ignoring Wi-Fi strength: A camera with a weak signal will disconnect constantly. Test the signal first!
• Forgetting the level: A crooked camera might not affect functionality, but it’s annoying to look at. Always use a level.

And here’s a bonus tip: If you’re mounting multiple cameras, plan their positions so they don’t overlap too much. You want full coverage, not redundant footage.

FAQs About How to Mount Arlo Camera to Stucco in 2026 Easy Guide

Let’s tackle some questions I get all the time. These are the real-world issues people face when mounting Arlo cameras on stucco.

Can I use adhesive strips instead of drilling?

Technically, yes—but I wouldn’t recommend it. Adhesive strips (like Command strips) might work for a lightweight camera, but stucco is textured and uneven, so the strips often don’t stick well. Plus, weather changes can weaken the adhesive over time. Drilling is the more reliable option for a permanent setup.

What if I crack the stucco while drilling?

It happens! Small cracks can be patched with exterior-grade stucco repair caulk. Clean the area, apply the caulk with a putty knife, and smooth it out. For larger cracks, you might need a professional, but it’s not the end of the world.

Do I need a special drill for stucco?

Not necessarily. A regular power drill works fine, but you do need the right drill bits. Masonry bits (with a carbide tip) are designed for stucco, brick, and concrete. Avoid wood or metal bits—they’ll just slip or overheat.

How high should I mount the Arlo camera?

For outdoor cameras, aim for 7–9 feet high. This gives you a good view of faces and license plates without being too easy to tamper with. Just make sure you can still reach it for cleaning or adjustments.

Can I mount the camera upside down (for a ceiling-like view)?

Yes! Some Arlo models support inverted mounting. Just adjust the mount so the camera points downward. This is great for covering a driveway or patio. Check your camera’s manual to confirm it supports this setup.

What if my stucco is really old and crumbly?

If the stucco is flaking or loose, drilling might not be safe. In that case, consider:

• Using a longer anchor to reach behind the stucco layer.
• Mounting to a wooden frame or soffit instead.
• Consulting a contractor for stucco repairs before mounting.

Will drilling void my Arlo warranty?

Nope! Arlo doesn’t care how you mount the camera, as long as you don’t damage the camera itself. Just don’t force anything or use excessive heat (like a blowtorch, for some reason).

Final Thoughts

Mounting an Arlo camera to stucco might seem daunting, but with the right tools and a little patience, it’s totally doable. This How to Mount Arlo Camera to Stucco in 2026 Easy Guide walks you through every step, from choosing the perfect spot to testing the final setup.

Remember: take your time, use the right tools, and don’t rush the process. A well-mounted camera is a reliable camera. And if you hit a snag? Don’t stress—everyone makes mistakes. Just patch it up, adjust, and keep going.

Now go enjoy that extra peace of mind knowing your home is protected. Happy mounting!

“`