Ring Doorbells are great for home security. But sometimes, you need to remove them. Maybe you are moving. Or you need to make repairs. This guide will help you. We will explain how to remove a Ring Doorbell step-by-step. The process is simple. You can do it yourself.
Tools You Will Need
Before you start, gather your tools. You will need:
- A screwdriver
- A drill (sometimes needed)
- A small container (for screws)
- Your Ring Doorbell’s special tool (if you have it)
Having these tools ready will make the job easier. Now, let’s get started.
Step-by-Step Instructions
1. Turn Off The Power
If your Ring Doorbell is wired, turn off the power. Go to your circuit breaker. Find the switch for your doorbell. Turn it off. This will keep you safe. You do not want to get a shock.
2. Remove The Faceplate
Next, remove the faceplate. This is the front part of your doorbell. Use the special tool that came with your Ring Doorbell. If you do not have it, a screwdriver can work. Insert the tool or screwdriver into the bottom hole of the faceplate. Gently lift the faceplate off.
3. Unscrew The Doorbell
Now, you will see the screws holding the doorbell to the wall. Use your screwdriver to remove these screws. Put the screws in your small container. This way, you will not lose them. Be careful. Hold the doorbell with one hand as you unscrew it. This will keep it from falling.
4. Disconnect The Wires
If your Ring Doorbell is wired, you will see wires connected to it. These wires provide power. Use your screwdriver to loosen the screws on the wires. Gently pull the wires away. Do not let the wires fall back into the wall. You may want to tape them to the wall for now.
5. Remove The Mounting Bracket
Once the doorbell is off, you will see the mounting bracket. This is the part attached to the wall. Use your screwdriver to remove the screws from the bracket. Put these screws in your container as well. Gently pull the bracket away from the wall.
6. Patch And Paint (optional)
There may be holes left in your wall. You can patch these holes if you want. Use wall putty. Put a small amount on a putty knife. Spread the putty over the holes. Let it dry. Then, you can paint over the putty to match your wall.
Tips for Different Ring Doorbell Models
There are different models of Ring Doorbells. The steps are mostly the same. But there are a few differences.
Ring Doorbell (1st And 2nd Generation)
These models have a security screw at the bottom. Use the special tool to remove it. After that, follow the steps above.
Ring Doorbell Pro
This model is thinner. It has a faceplate that snaps off. Use your fingers to pull it off gently. Then, follow the steps above.
Ring Doorbell Elite
This model is hardwired. It may have more wires. Be careful when disconnecting them. You may need a professional for this model.
Ring Doorbell 3 And 4
These models have a quick-release battery. Remove the battery before unscrewing the doorbell. Then, follow the steps above.
Frequently Asked Questions
Can I Remove My Ring Doorbell Without Tools?
No, you need tools. At least a screwdriver. The special tool that came with your Ring Doorbell is also helpful.
Is It Safe To Remove My Ring Doorbell?
Yes, it is safe. Just make sure to turn off the power first. This will keep you from getting a shock.
What If I Lose The Screws?
Try not to lose them. Use a small container to keep them safe. If you do lose them, you can buy replacement screws online.
Can I Reuse My Ring Doorbell In A New Home?
Yes, you can. Just follow the steps to remove it carefully. Then, you can install it in your new home.
Do I Need A Professional To Remove My Ring Doorbell?
Most people can do it themselves. But if you are unsure, you can hire a professional.
Conclusion
Removing a Ring Doorbell is easy. Just follow these steps. Gather your tools. Turn off the power. Remove the faceplate. Unscrew the doorbell. Disconnect the wires. Remove the mounting bracket. Patch and paint if needed. You can do it yourself. Stay safe and take your time. Good luck!