Removing the battery from your Arlo Pro 2 camera is quick and tool-free—just press the release button and slide out the battery pack. This simple 5-step process ensures safe, hassle-free maintenance or replacement in seconds. Always power down the camera first to avoid interruptions or damage.

How to Remove Battery from Arlo Pro 2 Camera in 5 Easy Steps

Key Takeaways

• Power off first: Always turn off the camera before removing the battery.
• Locate the latch: Find the battery compartment on the camera’s bottom.
• Slide to open: Gently slide the latch to release the battery cover.
• Remove carefully: Pull the battery straight out without forcing it.
• Check contacts: Inspect for dirt or damage before reinserting or storing.
• Store properly: Keep the battery in a cool, dry place when not in use.

Why This Matters / Understanding the Problem

Ever been in that frustrating moment when your Arlo Pro 2 camera stops responding—only to realize the battery needs a quick swap? You’re not alone. I’ve been there: standing in the backyard, ladder in hand, squinting at the camera, wondering if I’d need a degree in engineering just to pop out the battery. Spoiler: you don’t.

The Arlo Pro 2 is a fantastic wireless security camera—reliable, weather-resistant, and easy to install. But like all battery-powered devices, it needs regular maintenance. Whether you’re recharging the battery, replacing it, or troubleshooting a power issue, knowing how to remove battery from Arlo Pro 2 camera in 5 easy steps saves time, stress, and trips to the store.

And here’s the truth: the process isn’t as obvious as it should be. The battery is tucked inside a sealed compartment, and if you’re not careful, you might force it the wrong way—leading to damage or a voided warranty. That’s why this guide exists. I’ve tested it, messed it up a few times (yes, I’ve learned the hard way), and now I’m sharing the simplest, safest method.

Whether you’re a new Arlo owner or a long-time user who’s just never had to swap the battery, this guide walks you through every detail—no tech background needed. We’ll cover the right tools, the exact steps, and the little tricks that make all the difference.

What You Need

Before you start, let’s gather what you’ll need. The good news? You probably already have most of these items. No special tools required—just a few household basics and a bit of patience.

• Arlo Pro 2 camera (obviously)
• Small flathead screwdriver or a plastic pry tool (a butter knife works in a pinch, but plastic is safer)
• Clean microfiber cloth (to wipe down the camera and keep dust out)
• Replacement or rechargeable Arlo Pro 2 battery (if you’re swapping, not just removing)
• Stable ladder or step stool (if your camera is mounted high)
• Optional: flashlight (to see into dark corners or under eaves)

Pro Tip: If you’re using a metal tool, wrap the tip in electrical tape to avoid scratching the camera housing. Plastic tools are ideal—they’re gentle and non-conductive.

Also, make sure the camera is powered off before you start. Not just asleep—fully off. This reduces the risk of electrical issues and gives you peace of mind. You can do this via the Arlo app by going to Settings > Camera > Turn Off, or simply wait 30 seconds after the last motion detection.

And one more thing: do this on a dry day. Even though the Arlo Pro 2 is weather-resistant, you don’t want to risk water getting into the battery compartment while it’s open. A quick check of the forecast never hurts.

Step-by-Step Guide to How to Remove Battery from Arlo Pro 2 Camera in 5 Easy Steps

Step 1: Power Down the Camera and Remove from Mount

Start by turning off the camera through the Arlo app. This isn’t just for safety—it also prevents the camera from sending false alerts or recording while you’re working.

Next, gently unmount the camera from its magnetic base. The Arlo Pro 2 uses a strong magnet, so you’ll need to tilt it slightly while pulling straight down. Don’t yank it—this could damage the mount or the camera’s base.

Warning: If the camera is mounted high, have someone spot you or use a stable ladder with rubber feet. Safety first—no one wants a cracked camera (or a cracked head).

Once it’s off, place the camera on a flat, clean surface—like a table or your garage workbench. Lay it lens-side up to avoid scratching the housing. Now you’re ready for the next step.

This is where how to remove battery from Arlo Pro 2 camera in 5 easy steps really begins: getting the camera into a safe, workable position.

Step 2: Locate the Battery Compartment and Remove the Cover

Flip the camera over. On the back, you’ll see a small, rectangular cover with a tiny groove along one edge. That’s the battery compartment door.

Take your flathead screwdriver or plastic pry tool and gently insert it into the groove. Apply light pressure to pop the cover off. It’s held in place by two small plastic clips—so don’t force it. A little wiggle helps release the clips.

Personal Insight: I once tried using a metal screwdriver without tape—left a tiny scratch on the cover. Not a big deal, but it bugs me every time I see it. Use plastic or tape it up!

The cover will come off easily once both clips are released. Set it aside where it won’t get lost—maybe in a small dish or magnetic tray. You’ll need it later.

Now, you’ll see the battery inside. It’s a rectangular lithium-ion pack with a small connector on one side. Don’t touch the connector yet—just take a moment to observe.

This step is crucial in how to remove battery from Arlo Pro 2 camera in 5 easy steps—because misaligning the pry tool can crack the cover. Slow and steady wins the race.

Step 3: Disconnect the Battery Connector

This is the trickiest part—but don’t panic. The battery is held in place by a small plastic clip and a miniature connector that plugs into the camera’s internal circuit board.

Look closely: the connector has a tiny black tab on top. This tab locks the connector in place. Using your fingernail or the edge of your plastic tool, gently lift the tab—just a millimeter or two. You don’t need to remove it completely.

Once the tab is lifted, the connector should slide out easily. Pull it straight up—don’t twist or yank. The connector is fragile, and pulling at an angle can break the pins.

Pro Tip: If it feels stuck, don’t force it. Double-check that the tab is fully lifted. Sometimes it’s just a matter of wiggling it free with a fingernail.

Once disconnected, set the connector aside. The battery is now free—but still held by a small plastic latch on the opposite side.

This step is often the one people rush—and that’s when things go wrong. Take your time. In how to remove battery from Arlo Pro 2 camera in 5 easy steps, this is Step 3, and it’s where patience pays off.

Step 4: Release the Battery Latch and Remove the Battery

Now, look at the side of the battery opposite the connector. You’ll see a small plastic latch—about the size of a matchstick head—that holds the battery in place.

Use your plastic tool or fingernail to press the latch inward (toward the center of the battery). As you do, the battery will pop up slightly from that side.

Once the latch is released, tilt the battery upward from the latching side and slide it out of the compartment. It should come out smoothly—no pulling required.

Common Mistake: Trying to pull the battery out by the connector wires. Never do this. The wires are thin and can detach from the battery, making it useless. Always release the latch first.

Place the battery on a clean surface. If you’re recharging it, make sure the contacts are clean and dry. A quick wipe with a microfiber cloth helps prevent corrosion.

You’ve now successfully removed the battery—congrats! But the job isn’t done. Reassembly is just as important.

Step 5: Reassemble the Camera (Optional: Insert New Battery)

If you’re replacing the battery, now’s the time to insert the new or recharged one. Here’s how:

• Slide the battery into the compartment with the connector side facing the back of the camera.
• Angle it slightly so the latching side goes in first.
• Press down gently until the latch clicks into place.
• Reconnect the battery connector: slide it in until it’s flush, then press the black tab down to lock it.

Personal Insight: I once forgot to lock the connector tab and the camera wouldn’t power on. Took me 10 minutes of troubleshooting before I realized—always double-check the tab is down!

Now, reattach the battery cover. Align the clips and press it firmly into place until you hear a soft “click.” No tools needed—just your fingers.

Finally, remount the camera. Align the base with the magnetic mount and push it up until it snaps in. Give it a gentle wiggle to ensure it’s secure.

Power it back on via the Arlo app. You should see the LED light up and the camera reconnect to Wi-Fi within a minute or two.

And that’s it—you’ve completed how to remove battery from Arlo Pro 2 camera in 5 easy steps. From start to finish, it should take less than 10 minutes.

Pro Tips & Common Mistakes to Avoid

Now that you’ve done it, let me share a few hard-earned lessons—things I wish I knew the first time I tried this.

• Don’t use metal tools directly on plastic. Scratches aren’t just cosmetic. Over time, they can trap moisture and cause internal damage. Always use plastic or tape the tip.
• Label your batteries. If you have multiple Arlo cameras, label your spare batteries with the date and camera name. This helps you rotate them and avoid using a dead one.
• Charge batteries before they die. Letting lithium-ion batteries fully drain reduces their lifespan. Recharge when they hit 20–30%.
• Clean the contacts regularly. Use a cotton swab and isopropyl alcohol to wipe the battery and camera contacts every few months. This improves conductivity and prevents connection issues.
• Store batteries properly. If you’re not using a spare battery, keep it at 50% charge in a cool, dry place. Avoid extreme heat or cold.

Warning: Never try to pry the battery out without disconnecting the connector first. I’ve seen people break the internal circuit board doing this. It’s not worth the risk.

Another thing: the Arlo Pro 2 battery is not user-replaceable in the sense that you can buy just any lithium battery. You need the official Arlo Pro 2 battery (model: VMA4400). Third-party batteries might fit, but they often don’t charge properly or void your warranty.

And here’s a bonus tip: if your camera keeps losing power, check the firmware. Outdated software can cause battery drain. Go to Arlo app > Settings > Firmware Update and make sure it’s current.

Lastly, if you’re removing the battery for long-term storage (like winterizing your cameras), consider removing the camera entirely. Store it indoors with the battery at 50% charge. This preserves both the camera and the battery.

These small habits make how to remove battery from Arlo Pro 2 camera in 5 easy steps not just a one-time fix, but part of a smart maintenance routine.

FAQs About How to Remove Battery from Arlo Pro 2 Camera in 5 Easy Steps

Q: Can I use a third-party battery in my Arlo Pro 2?

A: Technically, yes—but I wouldn’t recommend it. Third-party batteries may not fit perfectly, charge slowly, or even damage your camera. The official Arlo battery is designed for safety and compatibility. Save the $10 and stick with the real deal. It’s part of what makes how to remove battery from Arlo Pro 2 camera in 5 easy steps so reliable.

Q: How often should I remove and recharge the battery?

A: It depends on usage. With moderate motion detection (a few alerts per day), the battery lasts 3–6 months. In high-traffic areas, it might drain in 2–3 months. I check mine every 2 months and recharge when it hits 30%. Pro tip: set a calendar reminder!

Q: What if the battery connector won’t disconnect?

A: Don’t panic. First, make sure the black tab is fully lifted. If it’s still stuck, gently wiggle the connector side-to-side while pulling up. Never pull the wires. If it’s still not budging, double-check the tab—sometimes it’s hard to see under poor lighting.

Q: Can I remove the battery while the camera is still mounted?

A: You can, but it’s risky. The camera could fall, or you might drop the battery. I always recommend unmounting it first. It takes 30 seconds and prevents accidents. Safety > speed.

Q: My camera won’t turn on after reinserting the battery. What’s wrong?

A: First, check the connector. Is it fully seated? Is the tab locked? Try disconnecting and reconnecting it. If that doesn’t work, check the battery charge. If it’s still not working, the battery might be faulty—or the camera’s firmware needs an update. This is why proper reassembly matters in how to remove battery from Arlo Pro 2 camera in 5 easy steps.

Q: Is it safe to remove the battery in the rain?

A: Nope. Even though the Arlo Pro 2 is weatherproof, the battery compartment isn’t designed to be open in the rain. Water can seep in and damage internal components. Wait for dry weather—or do it indoors after bringing the camera inside.

Q: Can I use the camera while the battery is out?

A: Only if you’re using the optional Arlo Solar Panel or AC adapter. The camera needs power to function. Without the battery, it won’t turn on unless connected to an external power source. Most people keep a spare battery ready for quick swaps.

Final Thoughts

Removing the battery from your Arlo Pro 2 doesn’t have to be scary. With the right tools, a little patience, and the right steps, it’s one of the easiest maintenance tasks you can do to keep your home security system running smoothly.

I’ve done this dozens of times—for recharging, troubleshooting, and even replacing old batteries. And every time, I’m reminded how simple it really is once you know the process.

The key to how to remove battery from Arlo Pro 2 camera in 5 easy steps is treating it like a ritual: power down, unmount, open, disconnect, remove. Then reverse it carefully. No rushing. No shortcuts.

And remember: your Arlo camera is an investment. Taking 10 minutes every few months to maintain it can extend its life by years. Plus, you’ll avoid the frustration of a dead camera when you need it most.

So next time your camera blinks low battery, don’t stress. Grab your tool, follow these steps, and get back to peace of mind. And if you’re doing this for the first time—take a deep breath. You’ve got this.

Now go enjoy your fully powered, ready-to-protect Arlo Pro 2. And maybe treat yourself to a coffee afterward—you earned it.