Step-by-Step Guide: Replacing Blink Outdoor Camera Battery with Ease

If you’re an owner of the Blink Outdoor camera, then you know how important it is to have a security device that can keep your home safe and secure. However, just like any other battery-operated gadget, the Blink Outdoor camera’s battery can run low and eventually need replacing. Replacing the Blink Outdoor camera battery can seem like a daunting task, but it’s not as complicated as you might think.

In this blog post, we’ll discuss step-by-step instructions on how to replace the Blink Outdoor camera battery and ensure your home security remains uninterrupted. So let’s dive right in, shall we?

Step 1: Remove the Camera from its Mount

If you’re wondering how to replace the Blink Outdoor camera battery, the first step is to remove the camera from its mount. For this, you’ll need the Blink tool that came with your camera, or a thin, pointed object like a paper clip or toothpick. Place the tool into the slot on the top of the camera and press down gently.

While holding the tool in place, push the camera downwards to release it from the mount. Once the camera is loose, carefully remove it from the mount and rest it on a stable surface. Be sure to disconnect any wiring from the back of the camera before proceeding to the next step.

With the camera removed, you can now access the battery compartment and replace the old batteries with fresh ones. By following these simple steps, you’ll be able to replace your Blink Outdoor camera battery with ease and keep your home security system up and running.

Carefully detach the camera from its mounting plate

If you’re looking to remove your camera from its mounting plate, you’ve come to the right place. The first thing you need to do is carefully detach the camera from its mount. Depending on the type of mount you have, this can be done in a variety of ways, so it’s important to read the manufacturer’s instructions carefully before beginning the process.

Once you understand how to remove the camera from the mount, you can proceed by gently lifting the camera or pressing a release button, depending on the type of mount you have. It’s important to be gentle while removing the camera from the mount to avoid damaging the camera or mount. Once the camera is removed, you can store it safely or mount it on a different plate or tripod.

Remember to always be careful and follow the instructions to ensure that your camera stays safe and secure.

how to replace blink outdoor camera battery

Use a screwdriver if necessary

When it comes to removing a camera from its mount, sometimes a screwdriver is necessary to get the job done. This might seem intimidating, but it’s really not that difficult once you know what you’re doing. The first step is to assess your camera mount and see if there are any screws that need to be removed.

If so, locate the appropriate screwdriver and gently remove the screws. Be sure to keep them in a safe place so you don’t lose them. Once the screws are out, the camera should easily pop out of its mount.

It’s important to be careful not to damage any parts or cords during this process. By taking your time and being patient, you can successfully remove your camera from its mount and either replace it with a new one or make any necessary repairs. Don’t be afraid to use a screwdriver if necessary – it’s an essential tool in the camera removal process.

Step 2: Open the Battery Compartment

To replace the battery of your Blink outdoor camera, the first step is to open the battery compartment. It’s a simple process that requires no tools, just a gentle push on the release button located on the bottom of the camera. Once you press the button, the compartment door will pop open, allowing you to access the battery.

Remember to handle the battery with care and to remove it gently from the camera. It’s important to note that replacing the battery on your Blink camera should be done as soon as the low battery notification appears on the mobile app. Doing so will ensure that your camera will continue to function optimally, allowing you to keep your home safe and secure at all times.

Locate the battery door and slide it open

Locating the battery compartment of your device can sometimes be a challenge, but it’s an essential step in maintaining and upgrading your device. The battery compartment is typically located on the outside of your device, and it’s crucial to know how to open it. The first step is to locate the battery door, which is usually found at the back, bottom, or side of your device.

Once you have identified the battery door, you can slide it open to reveal the battery compartment. Sometimes the door may be secured by screws or clips, so be sure to consult your device’s user manual before attempting to open it. Once you have opened the battery compartment, you can either replace the batteries or inspect them to see if they need to be cleaned or replaced.

Keeping your device’s battery compartment clean and free of debris is essential to ensure that your device functions properly. So always take the time to locate and open your device’s battery compartment to ensure you’re taking the necessary steps to maintain your device’s longevity and performance.

Remove the old batteries from the compartment

When it comes to replacing batteries, one of the most important steps is opening the battery compartment. Once you’ve located the compartment, it’s time to remove the old batteries. This step is crucial because you want to make sure you have a clean slate for your new batteries to work with.

To remove the old batteries, you can usually just slide them out of the compartment. However, if they are stuck or difficult to remove, you can use a small tool, like a screwdriver, to gently pry them out. It’s important to be careful not to damage the compartment or the batteries themselves.

Once the old batteries are removed, you can move on to inserting the new ones. Remember to properly dispose of the old batteries by recycling them at a proper facility. By taking care of your batteries in this manner, you’ll ensure that your devices continue to work safely and efficiently.

Step 3: Install New Batteries

After removing the old batteries from your Blink outdoor camera, it’s time to install the new ones. Make sure you have the correct type of batteries that are recommended by Blink. The camera requires two AA lithium batteries for proper operation.

Now, insert the new batteries according to the battery orientation indicated in the camera’s battery compartment. Make sure the positive and negative terminals align with the corresponding marks in the camera, or the device won’t function properly. Once the batteries are securely placed, replace the battery cover back on the camera.

It’s essential to ensure that the battery cover snaps securely and is locked into place. Now, turn on the camera and check the battery indicator to confirm that the new batteries are working properly. If the battery status shows full power, then you’ve installed the batteries correctly.

Congratulations! Your Blink outdoor camera is now ready to use.

Insert new batteries into the battery compartment

If you’re experiencing issues with your device, one of the first things you should check is your battery. It’s a common culprit for many problems. To install new batteries, the first thing to do is check the type of batteries needed.

Ensure that you purchase the right type of batteries by checking the label on the battery compartment or the device’s manual. Once you have the appropriate batteries, insert them into the battery compartment, following the directional arrows. Ensure that the positive and negative ends are aligned with the proper markings.

Finally, replace the battery compartment cover, and turn on the device to confirm that it’s working correctly. Don’t forget to safely dispose of used batteries and recycle them appropriately. A well-functioning battery is essential for the proper operation of your device, so make sure you keep an eye on it and replace it as needed.

Ensure they are placed correctly as indicated by +/- signs

Installing new batteries is a simple process. However, it’s vital to ensure they are placed correctly as indicated by the +/- signs. The polarity of the batteries is essential to their functionality and can cause damage to the device if installed incorrectly.

To avoid any mishaps, check the instructions provided with the device or examine the battery compartment before installing the new ones. Make sure to confirm the correct orientation of the batteries before installation. A useful tip is to always start with the negative (-) end of the battery and work your way to the positive (+) end.

This step is critical, especially when dealing with devices that require multiple batteries. The last thing you want is to install the batteries incorrectly, resulting in damage to the device or even the batteries themselves. Taking the time to ensure proper battery placement is worth the effort and will ensure optimal device performance.

Step 4: Reassemble and Reset Camera

Now that you’ve successfully replaced the battery in your Blink outdoor camera, it’s time to reassemble and reset it. First, reattach the battery cover and make sure it clicks securely into place. Then, hold down the small button on the bottom of the camera until the LED light flashes quickly.

This will reset the camera. Finally, use the Blink app to reconnect the camera to your home Wi-Fi network by scanning the QR code on the back of the camera. It’s important to note that this process may take a few minutes to complete, so be patient.

Once the camera is reconnected, make sure to test it to ensure it’s functioning properly. Congratulations, you’ve successfully replaced the battery in your Blink outdoor camera and reset it for continued use!

Close the battery compartment

To finish up the camera reset process, the final step is to reassemble the camera and close the battery compartment. Make sure the battery is fully charged before you begin. Insert the battery and ensure that it is securely in place.

Next, reattach any screws or clips that were removed in the disassembly process. Once the components are reassembled, power on the camera. You should see a message prompting you to set up the camera as if it were new.

Make sure to follow the prompts to reset all the settings to default. Once the process is complete, you can start using your camera again. Remember, it is essential to make sure the battery compartment is closed properly before powering your camera back on.

Now that your camera is reset, it should perform optimally, and you can expect to take clear and crisp photographs.

Reattach the camera to its mounting plate

After replacing the lens, it’s time to reattach the camera to its mounting plate. Begin by aligning the camera with the plate and securing it in place with the screws provided. Don’t forget to check if there are any missing or damaged screws that need replacing.

Once the camera is securely attached, take a moment to make sure it’s level, so the final footage is straight. Lastly, reset the camera to its default settings by following the manufacturer’s instructions. Doing this ensures you’re starting fresh with the camera settings and can achieve the best possible footage.

Don’t rush this step, as it’s essential to get everything back into place correctly. With the camera reattached and reset, you’re now ready to start using it once again.

Reset the camera to ensure it is working properly

After cleaning the camera thoroughly, the next step is to reassemble and reset the device. This is an important step in ensuring that the camera is working properly. It involves carefully putting all the parts back together and making sure that they are properly secured.

Once the camera is reassembled, it is important to reset it to its default settings. This can be done by going to the camera’s menu and selecting the reset option. Resetting the camera will ensure that all the settings are back to their original state, making it easier to troubleshoot any issues that may arise.

It is also important to update the camera’s firmware to ensure that it is operating with the latest software updates. By taking these steps, the camera will be ready for use, and you can start capturing high-quality images once again.

Conclusion: Keep Your Camera Charged

In conclusion, replacing the battery in your Blink outdoor camera is easier than navigating a corn maze blindfolded. Simply follow the steps provided in the user manual and you’ll have your camera up and running in no time. And remember, a fresh battery means uninterrupted surveillance, which is crucial in keeping your home or business safe.

So don’t procrastinate and swap out that battery today.”

Regularly check the battery level and replace as needed

As a photography enthusiast, ensuring that your camera is always in top shape is vital in capturing great shots. One of the essential things you need to check is the battery level. Always check the battery level and replace it as needed to avoid unexpected camera shutdowns.

A low battery level can also affect the performance of your camera, causing delays in taking shots and slowing down the camera’s response time. Once you’ve replaced the battery, it’s time to reassemble and reset your camera. Reassembling the camera is straightforward.

Make sure that all the parts are back in place, and you have tightened any screws that may have been loosened during the process. Now, it’s time to reset the camera. Resetting will clear any settings that may have been affected during the disassembly process.

To reset your camera, refer to the user manual, which contains the specific instructions on how to reset your camera’s settings. After resetting your camera, you can now start using it again. Make sure to perform an initial test run to ensure that everything is working as expected.

Taking care of your camera is crucial in ensuring its longevity and optimal performance. By following these steps, you can be confident that your camera will be in excellent shape and ready to capture those picture-perfect moments. Don’t neglect the little things, like checking the battery level and resetting your camera after disassembly, as these can significantly affect your camera’s performance.

Ensure your camera is properly mounted to prevent battery drainage

“reassemble camera” Now that you’ve checked your camera’s battery and mounting, it’s time to reassemble and reset it. This step is important because if you don’t put everything back together correctly, your camera won’t function properly. To ensure you don’t miss anything, refer to the user manual or tutorial videos specific to your camera model.

Once you’ve put everything together, make sure to reset your camera settings. This will clear any previous configurations and ensure that your camera operates at its optimal performance. Remember to also check for any firmware updates as this can affect your camera’s functionality.

By following these steps, you can prevent any unwanted issues that may arise from improper reassembly and ensure that your camera will function smoothly.


How often do I need to replace the battery of my Blink Outdoor camera?
The frequency of battery replacement largely depends on the usage of the camera. On average, you may need to replace the AA lithium batteries every 2 years.

Can I use rechargeable batteries for my Blink Outdoor camera?
Yes, you can use rechargeable batteries as long as they are AA lithium batteries with a minimum 1.5V output.

How do I replace the battery in my Blink Outdoor camera?
To replace the battery, open the camera’s back cover by pressing the latch, remove the old batteries, and replace them with new ones according to the polarity markings.

Can I replace the batteries while the camera is recording?
Yes, you can replace the batteries while the camera is recording, but it may cause a short interruption in the camera’s operation. It’s best to replace the batteries during a scheduled break or when the camera is not in use.