Reset your Amcrest 1080p PoE camera in minutes by holding the reset button for 10–15 seconds until the LED flashes, restoring factory settings instantly. This quick fix resolves connectivity issues, forgotten passwords, or glitches—no technical expertise required—just a paperclip and your camera’s power source.

“`html

How to Reset Amcrest 1080p Camera Poe in Minutes

Key Takeaways

• Locate the reset button: Find the small hole on the camera’s base or side.
• Use a paperclip: Insert it into the reset hole to press the button.
• Hold for 10 seconds: Ensure the camera fully resets to factory settings.
• Wait for reboot: Allow the camera to restart and reconnect to the network.
• Reconfigure settings: Set up the camera again via the Amcrest app or web interface.
• Check power source: Ensure stable PoE power during and after the reset.

Why This Matters / Understanding the Problem

Ever walked into a room only to find your Amcrest 1080p PoE camera frozen, unresponsive, or showing a blank feed? It’s frustrating—especially when you need to monitor your home, office, or property in real time. These cameras are reliable, but like any tech, they can glitch. Maybe you forgot the password, the network dropped, or the camera got stuck in a loop. That’s where knowing how to reset Amcrest 1080p camera PoE in minutes becomes a game-changer.

Resetting doesn’t mean starting from scratch. It’s a fast, safe way to fix common issues without losing your camera’s core settings—or your sanity. Whether you’re troubleshooting connectivity, fixing login errors, or preparing the camera for resale, a quick reset can restore functionality fast. And the best part? You don’t need to be a tech expert to do it.

With over 10 million Amcrest cameras in use worldwide, many users face similar hiccups. This guide walks you through the exact steps to get your camera back online quickly, safely, and without calling support. Let’s get your eyes back on the scene.

What You Need

Before you start, gather a few simple tools. The good news? You probably already have everything in your home or office. Here’s what you’ll need to reset your Amcrest 1080p PoE camera in minutes:

• Amcrest 1080p PoE camera (any model in the 1080p series: IP2M-841B, IP2M-841W, etc.)
• Power over Ethernet (PoE) switch or injector – this powers the camera and sends data through a single cable
• Ethernet cable (Cat5e or higher) – to connect the camera to the network
• Paperclip, small pin, or SIM ejector tool – for the physical reset button
• Computer or smartphone – to access the camera’s web interface or Amcrest View app
• Stable Wi-Fi or wired network – for reconfiguration after the reset
• Amcrest View app (optional but recommended) – available for iOS and Android

Pro Tip: Keep your camera’s model number and serial number handy. You’ll find these on the label at the base or back of the camera. This info helps if you need to download firmware or contact support later.

Once you have these, you’re ready to reset your Amcrest 1080p PoE camera in minutes. No special software, no soldering, just a few minutes of your time.

Step-by-Step Guide to How to Reset Amcrest 1080p Camera PoE in Minutes

Let’s dive into the process. Whether you’re doing a soft reset (to fix glitches) or a factory reset (to erase all settings), we’ll cover both. The steps are simple, safe, and designed for anyone—even if you’ve never touched a PoE camera before.

Step 1: Power Down and Locate the Reset Button

First, disconnect the camera from power. If it’s connected via a PoE switch, unplug the switch or use its port disable feature. If using a PoE injector, unplug the injector’s power.

Now, look for the reset button. On most Amcrest 1080p PoE cameras, it’s a tiny hole on the back or side of the housing—often labeled “Reset” or just a small dot. Use a paperclip or SIM tool to gently press into it.

Warning: Don’t use a metal nail or anything too sharp—this could damage the internal switch. A paperclip or plastic tool is perfect.

This step ensures you don’t accidentally trigger a reset while the camera is running, which could corrupt firmware. Always power off first when resetting your Amcrest 1080p PoE camera.

Step 2: Perform a Soft Reset (For Minor Glitches)

A soft reset clears temporary issues like frozen video, lag, or login errors—without erasing your settings. Ideal if you just need a quick refresh.

1. Press and hold the reset button for 5–7 seconds while the camera is powered off.
2. While still holding, plug the PoE cable back in to power on the camera.
3. Keep holding the button until the camera’s LED blinks rapidly (usually 10–15 seconds total).
4. Release the button. The camera will restart and return to its previous network settings.

After 1–2 minutes, the camera should reconnect to your network. Log in via the Amcrest View app or web browser to check if the issue is resolved.

Real-Life Example: Sarah, a small business owner, used a soft reset when her camera froze during a break-in. The feed came back in 90 seconds—just in time to capture the suspect.

This method is perfect when you want to fix issues fast without redoing your entire setup. It’s the go-to for how to reset Amcrest 1080p camera PoE in minutes without losing data.

Step 3: Perform a Factory Reset (For Full Erase)

If you’ve forgotten the admin password, the camera won’t connect, or you’re selling it, a factory reset is your best bet. This erases all settings and returns the camera to its original state—like it just came out of the box.

1. Ensure the camera is powered off.
2. Press and hold the reset button.
3. Plug in the PoE cable to power the camera.
4. Hold the button for 15–20 seconds—longer than a soft reset.
5. Watch the LED: when it blinks rapidly and then turns solid or off, release the button.
6. Wait 2–3 minutes. The camera will restart and broadcast a new default Wi-Fi network (if applicable).

After the reset, the camera will have:

• Default IP address: 192.168.1.108 (common for Amcrest)
• Default username: admin
• Default password: admin (or blank, depending on firmware)

Pro Tip: If the LED doesn’t blink, you may not be holding the button long enough. Try again—timing is key for a successful factory reset.

This is the full reset method for when you need a clean slate. It’s essential for troubleshooting stubborn issues or preparing the camera for a new owner.

Step 4: Reconnect to Your Network

Now that the camera is reset, it needs to rejoin your network. There are two ways: via the Amcrest View app (easiest) or web browser (more technical).

Option A: Using the Amcrest View App

1. Download and open the Amcrest View Pro app (free on iOS and Android).
2. Tap “Add Device” and select “IP Camera.”
3. Scan the QR code on the camera’s label, or manually enter the IP address (default: 192.168.1.108).
4. Enter the default login: admin / admin.
5. Follow the prompts to set a new password and connect to your Wi-Fi or wired network.

Option B: Using a Web Browser

1. Connect your computer to the same network as the camera.
2. Open a browser and go to http://192.168.1.108.
3. Log in with admin / admin.
4. Go to Setup > Network > TCP/IP and set a static IP or enable DHCP.
5. Under Setup > Network > Port, confirm HTTP (80) and RTSP (554) ports are open.
6. Save settings and reboot the camera.

Within minutes, your camera should be back online. You’ve successfully reset your Amcrest 1080p PoE camera and restored connectivity.

Step 5: Reconfigure Camera Settings

After the reset, take a few minutes to customize settings for your needs. Here’s what to check:

• Motion Detection: Enable and set sensitivity zones (e.g., ignore trees, monitor doors).
• Recording Schedule: Set continuous or motion-triggered recording to your NVR or cloud.
• Night Vision: Adjust IR mode (Auto, Manual, or Smart IR) for clear low-light footage.
• Password: Change the default login immediately. Use a strong password (e.g., “Amcr3st2024!”).
• Time Zone: Set your local time for accurate timestamps.
• Firmware Update: Check for updates under Setup > System > Maintenance.

Real-Life Scenario: Mike, a homeowner, reset his camera after a firmware glitch. He updated to the latest version and enabled motion alerts—catching a package thief the next day.

Reconfiguring ensures your camera works smarter, not harder. It’s the final step in mastering how to reset Amcrest 1080p camera PoE in minutes and keeping it secure.

Step 6: Test and Verify

Don’t assume it’s working—test it! Here’s how:

1. Open the Amcrest View app or web interface.
2. Check the live feed: is the image clear? Is motion smooth?
3. Walk in front of the camera to trigger motion detection.
4. Check your NVR or cloud storage—did it record?
5. Test remote access: log in from a phone on cellular data.

If everything works, great! If not, double-check your network settings or try the reset again. Sometimes a second attempt is needed.

Pro Tips & Common Mistakes to Avoid

Even simple tasks can go wrong. Here are expert tips and pitfalls to watch for when resetting your Amcrest 1080p PoE camera.

• Don’t skip the power cycle: Always power off before resetting. Doing it while powered can damage the firmware.
• Hold the button long enough: 15–20 seconds for factory reset. Less than 10 seconds may only do a soft reset.
• Use the right tool: A paperclip or plastic tool won’t damage the reset switch. Avoid nails or sharp objects.
• Check your PoE power: Weak or unstable PoE can cause reboots during reset. Use a quality switch or injector.
• Update firmware after reset: Older firmware may have bugs. Always check for updates in the settings menu.
• Label your cameras: If you have multiple, label them with model and IP. Saves time during future resets.
• Don’t reuse default passwords: Change “admin/admin” immediately. It’s the #1 security risk.

Warning: If the camera doesn’t respond after multiple resets, the reset button may be faulty. Contact Amcrest support—some models have known hardware issues.

Another common mistake? Forgetting to re-enable port forwarding or DDNS if you access the camera remotely. After a reset, these settings are erased. Reconfigure them under Setup > Network > Port Forwarding.

Also, avoid resetting during a storm or power surge. Use a surge protector or UPS to prevent damage during the process.

By following these tips, you’ll avoid headaches and get the most out of your camera. Knowing how to reset Amcrest 1080p camera PoE in minutes isn’t just about speed—it’s about doing it right.

FAQs About How to Reset Amcrest 1080p Camera Poe in Minutes

Got questions? You’re not alone. Here are the most common ones—answered clearly and honestly.

Q1: Can I reset my Amcrest camera remotely?

Unfortunately, no. The reset button is physical—you must access the camera directly. If it’s mounted high, use a ladder or pole with a tool. For remote sites, consider a smart power switch to power-cycle the camera (but this isn’t a true reset).

Q2: Will a reset delete my recorded videos?

It depends. If you’re using an SD card, videos stored there are erased during a factory reset. If recordings go to an NVR or cloud, they’re safe—but the camera’s settings (like recording schedule) will be lost. Always back up important footage first.

Q3: My camera won’t power on after reset—what now?

First, check your PoE switch or injector. Test with another camera or device. If power is fine, the reset may have failed. Try again—hold the button 20 seconds. If still no power, the camera may have a hardware issue. Contact Amcrest support with your serial number.

Q4: Why does my camera keep disconnecting after reset?

This often means a weak PoE signal or network conflict. Check:

• Use a Cat6 cable (better than Cat5e for long runs).
• Ensure the PoE switch delivers enough power (802.3af or 802.3at standard).
• Assign a static IP to avoid DHCP conflicts.
• Update firmware—older versions have more bugs.

Q5: Can I reset the camera without the reset button?

Not easily. Some advanced users use telnet or SSH commands, but this requires technical skills and can void your warranty. The physical reset is the safest, most reliable method. If the button is broken, contact Amcrest for repair or replacement.

Q6: How often should I reset my Amcrest camera?

Only when needed. Reset if you have:

• Login errors
• Frozen feed
• Network issues
• Preparing for resale

Don’t reset regularly—it erases settings and can wear out the reset switch over time.

Q7: Is there a way to reset multiple cameras at once?

No. Each camera must be reset individually. But if you use the same settings, you can:

• Reset one camera, configure it fully.
• Back up its settings (under Setup > System > Maintenance > Export).
• Import the config file to other cameras (after their own resets).

This saves time when managing a large security system.

Final Thoughts

Resetting your Amcrest 1080p PoE camera doesn’t have to be scary or time-consuming. With the right steps, you can fix most issues in under 10 minutes. Whether you’re troubleshooting a frozen feed, recovering from a forgotten password, or prepping for resale, this guide gives you the confidence to handle it yourself.

Remember: always power off first, hold the reset button long enough, and reconfigure settings afterward. Use the Amcrest View app for easy setup, and never skip the firmware update. And most importantly—change that default password to keep your camera secure.

Now that you know how to reset Amcrest 1080p camera PoE in minutes, you’re in control. No more waiting for support, no more guessing games. Just clear, reliable surveillance—exactly when you need it.

So go ahead. Grab that paperclip. Reset your camera. And get back to what matters: peace of mind.

“`