Reset your Amcrest Bullet Camera in 2026 quickly and securely using the physical reset button or the Amcrest View Pro app—no technical expertise required. Simply hold the reset button for 10 seconds or use the app’s remote reset feature to restore factory settings and resolve connectivity or performance issues. This foolproof method ensures a fresh start, keeping your surveillance system up to date and fully functional.

How to Reset Amcrest Bullet Camera in 2026 Easy Guide

Key Takeaways

• Locate the reset button: Find the small hole on the camera’s base or side.
• Use a paperclip: Press and hold the reset button firmly for 10 seconds.
• Wait for LED flash: Release when the camera’s light blinks rapidly to confirm reset.
• Reconnect to Wi-Fi: Reconfigure network settings post-reset via the Amcrest app.
• Factory settings restored: All custom settings are erased—back up if needed.
• Update firmware: Install latest updates after reset to ensure optimal performance.

Why This Matters / Understanding the Problem

Ever tried to log into your Amcrest Bullet Camera and been locked out—maybe you forgot the password, the camera froze, or it’s not connecting to your app? It’s frustrating, especially when you need to check your home or business remotely.

That’s where knowing how to reset Amcrest Bullet Camera in 2026 easy guide comes in handy. A factory reset wipes all custom settings and restores the camera to its original state, fixing login issues, network glitches, and firmware bugs.

Whether you’re setting up a new camera, reassigning one to a new network, or troubleshooting connectivity problems, a reset is often the fastest fix. And the best part? You don’t need to be tech-savvy to do it.

This guide walks you through every step, from gathering tools to confirming the reset worked. We’ll cover both hard reset (using the button) and soft reset (via app or web interface), so you can choose what works best for your situation.

Let’s get your Amcrest Bullet Camera back online—fast and stress-free.

What You Need

Before you start, make sure you have these tools and info ready. A smooth reset depends on being prepared.

• A small paperclip or pin – to press the reset button (usually recessed).
• Access to the camera physically – you’ll need to reach the reset button on the housing or cable.
• Your Wi-Fi network name (SSID) and password – after reset, you’ll reconnect to the internet.
• Amcrest View Pro app or web browser – to set up the camera again.
• A computer or smartphone – for configuration after reset.
• Ethernet cable (optional) – helpful if Wi-Fi is unstable during setup.

Note: Some Amcrest Bullet Cameras (like the IP series) have the reset button on the pigtail cable, not the camera body. Check your model’s manual if unsure.

Pro Tip: Take a photo of your current network settings before resetting. This helps you reconfigure faster and avoid re-entering everything from memory.

Now that you’re ready, let’s dive into the how to reset Amcrest Bullet Camera in 2026 easy guide—starting with the most common method: the physical button reset.

Step-by-Step Guide to How to Reset Amcrest Bullet Camera in 2026 Easy Guide

Step 1: Power On the Camera

Make sure your Amcrest Bullet Camera is powered on. You should see the status LED light up—usually green, blue, or red depending on the model.

If the camera isn’t on, plug in the power adapter (usually 12V DC) and wait 30–60 seconds for it to boot up. The camera needs to be fully powered before you reset it.

Tip: If you’re using PoE (Power over Ethernet), connect the Ethernet cable to a PoE switch or injector. No extra power adapter needed.

Warning: Don’t try to reset a camera that’s still booting. Wait until the LED is steady or blinking slowly (not rapidly).

Step 2: Locate the Reset Button

This is the trickiest part for beginners. The reset button is not always on the camera body.

• On the cable (most common): Look at the pigtail cable (the short cord with BNC, power, and network connectors). There’s often a small hole labeled “Reset” or “RST” near the network port.
• On the camera body: Some models (like the IP8M-2796EW) have the reset button on the back or side of the camera housing.
• Under the cover: For outdoor models, you may need to remove a rubber cap or weatherproof cover to access the button.

Use a flashlight if needed. The hole is tiny—about the size of a pinhead.

Once you find it, keep your paperclip or pin nearby.

Step 3: Press and Hold the Reset Button

Here’s the core of the how to reset Amcrest Bullet Camera in 2026 easy guide:

1. Insert the paperclip into the reset hole.
2. Press and hold the button for 10 to 15 seconds.
3. Watch the LED lights. Most cameras will flash rapidly (usually blue or green) during the reset.

Don’t let go too soon. If you release before 10 seconds, the reset won’t trigger.

After 10–15 seconds, the camera will restart. You’ll see the LED cycle through colors—this is normal. It’s loading factory defaults.

Pro Tip: Count to 15 slowly in your head. “One thousand one, one thousand two…” This ensures you hold it long enough.

Note: Some older models may require 20 seconds. If unsure, check your model’s manual or Amcrest’s support site.

Step 4: Wait for the Camera to Reboot

After releasing the reset button, the camera will restart. This can take 1 to 3 minutes.

During reboot:

• The LED may blink rapidly, then slowly, then turn solid.
• The camera will re-enable its default Wi-Fi access point (if it has one).
• It will erase all custom settings: passwords, motion zones, schedules, and saved Wi-Fi networks.

Do not unplug or touch the camera during this time. Let it finish.

Once the LED is steady (usually solid blue or green), the reset is complete.

Step 5: Reconnect to the Camera (App or Web)

Now that the camera is reset, it’s time to set it up again. You have two options:

Option A: Use the Amcrest View Pro App (Recommended for most users)

1. Open the Amcrest View Pro app on your phone or tablet.
2. Tap “Add Device” or the “+” icon.
3. Select “IP Camera” or “Bullet Camera.”
4. The app will scan your network for new devices. Look for your camera’s default name (e.g., “Amcrest-XXXX”).
5. Tap it to connect. The app will guide you through setup: set a new password, connect to Wi-Fi, and name the camera.

Option B: Use a Web Browser (For advanced users or wired setup)

1. Connect your computer to the same network as the camera (or use Ethernet).
2. Open a browser and go to http://192.168.1.108 – the default IP address.
3. Log in with default credentials: Username: admin, Password: admin (or blank).
4. Follow the setup wizard to change the password, configure Wi-Fi, and update settings.

Both methods work. The app is faster and more user-friendly for beginners.

Step 6: Reconfigure Your Camera Settings

After connecting, don’t just stop—reconfigure your camera for security and performance.

• Set a strong password: Use 8+ characters, mix letters, numbers, and symbols.
• Connect to Wi-Fi: Enter your home or office network details.
• Enable motion detection: Adjust zones and sensitivity to avoid false alerts.
• Set recording mode: Choose continuous, motion-only, or schedule-based.
• Enable two-factor authentication (if available): Adds extra security.

Take a few minutes to name the camera (e.g., “Front Door” or “Back Yard”) so it’s easy to identify in the app.

Warning: Never skip changing the default password. Hackers scan for cameras with “admin/admin” logins.

Step 7: Test the Camera

Once everything is set, test your camera:

• Open the app and view the live feed.
• Move in front of the camera to trigger motion detection.
• Check if recordings save to your microSD card or cloud (if subscribed).
• Test remote access from a different network (e.g., using mobile data).

If it works, great! You’ve successfully completed the how to reset Amcrest Bullet Camera in 2026 easy guide.

If not, don’t panic—see the troubleshooting tips below.

Step 8: Optional – Soft Reset via App or Web (No Physical Button)

Not all Amcrest Bullet Cameras have a physical reset button. Some newer models let you reset from the software.

Via Amcrest View Pro App:

1. Go to “Device Settings” for your camera.
2. Tap “System” or “Maintenance.”
3. Select “Restore to Factory Settings.”
4. Confirm. The camera will restart automatically.

Via Web Browser:

1. Log into the camera’s web interface.
2. Go to “Setup” > “System” > “Maintenance.”
3. Click “Restore” or “Factory Reset.”
4. Confirm. The camera will reboot.

This method is great if you can’t physically access the camera—like if it’s mounted high on a wall.

Pro Tip: Use the soft reset if you’re troubleshooting remotely and can still log in. It’s faster than climbing a ladder.

Pro Tips & Common Mistakes to Avoid

Even with clear steps, things can go wrong. Here’s what experienced users wish they knew before resetting their Amcrest Bullet Camera.

Pro Tips

• Reset during low-traffic hours: If you’re using the camera for security, reset at night or when no one’s around. You won’t miss activity.
• Label your camera: Use masking tape to write the model and reset date on the back. Helps if you need to reset again later.
• Update firmware after reset: Go to “System” > “Firmware Upgrade” in the app or web interface. Newer firmware fixes bugs and improves security.
• Use a static IP (for advanced setups): After reset, assign a fixed IP address in your router to avoid connection drops.
• Back up settings (if possible): Some models let you export configuration files. Save them before resetting for quick restore.

Common Mistakes

❌ Holding the reset button too short: Less than 10 seconds? The reset won’t trigger. Always count to 15.

❌ Not powering off before resetting: While not required, some users report issues if the camera is under heavy load. Power it off, wait 10 seconds, then power on and reset.

❌ Skipping Wi-Fi reconnection: After reset, the camera won’t remember your network. You must reconnect via app or web.

❌ Using the wrong default IP: If 192.168.1.108 doesn’t work, try 192.168.1.100 or use the Amcrest IP Finder tool.

❌ Forgetting to change the password: Leaving it as “admin” or blank makes your camera vulnerable to hackers. Change it immediately.

One real-life example: A homeowner reset their Amcrest IP3M-941B but forgot to reconnect to Wi-Fi. They assumed it would auto-reconnect—it didn’t. The camera recorded locally but was offline remotely. Lesson: always verify the Wi-Fi connection after reset.

Another user tried to reset via app but couldn’t find the option. Turns out their camera model only supports physical reset. Always check your model’s manual or Amcrest’s support page.

Following this how to reset Amcrest Bullet Camera in 2026 easy guide helps avoid these pitfalls.

FAQs About How to Reset Amcrest Bullet Camera in 2026 Easy Guide

Here are the most common questions—answered by real users and technicians.

Q1: How long does the reset process take?

A full reset (button press + reboot + setup) takes about 5 to 10 minutes. The actual button hold is 10–15 seconds. The rest is waiting for reboot and reconfiguring.

If you’re using the app, setup is faster. Web setup may take longer if you’re unfamiliar with IP addresses.

Q2: Will I lose my recordings?

Yes—but only if they’re stored on the camera. A factory reset erases:

• All microSD card recordings
• Saved settings and passwords
• Network configurations

But it won’t affect:

• Cloud recordings (if you have an Amcrest Cloud subscription)
• Recordings saved to your phone or computer
• External NVR/DVR systems (if connected)

So: back up your SD card before resetting if you need the footage.

Q3: What if I can’t find the reset button?

First, check your model:

• IP Series (e.g., IP3M, IP8M): Button on the pigtail cable.
• HD Series (e.g., HD810): Button on the camera body.
• Newer AI Models (e.g., AI3M): May only support soft reset via app.

If you still can’t find it, search “[Your Model] reset button location” on YouTube or Amcrest’s support site.

Or, use the soft reset method if you can still log in.

Q4: My camera won’t connect after reset. What now?

Try these fixes:

1. Power cycle: Unplug for 30 seconds, then plug back in.
2. Check Wi-Fi signal: Move the camera closer to the router during setup.
3. Use Ethernet: Connect directly to the router for a stable connection.
4. Restart your router: Sometimes the network needs a refresh.
5. Use Amcrest IP Finder: Download this tool from Amcrest’s site to locate the camera on your network.

If it still doesn’t work, the camera may have a hardware issue. Contact Amcrest support.

Q5: Can I reset multiple cameras at once?

No. You must reset each camera individually. The reset button is per-device.

But: you can save time by setting up the first camera, then using the same settings (Wi-Fi, password, etc.) for the others.

Tip: Name them “Front Door,” “Garage,” “Back Yard” to avoid confusion.

Q6: Is a reset the same as a reboot?

No. A reboot (power cycle) just restarts the camera. It keeps all settings.

A reset wipes everything—like a fresh install. Use reboot for minor glitches, reset for serious issues (login failure, network errors).

Q7: Do I need to reset after a firmware update?

Usually not. Most firmware updates apply without needing a reset.

But if the camera acts strange after updating (e.g., freezing, disconnecting), a reset can help.

Always back up settings before updating firmware—just in case.

Final Thoughts

Knowing how to reset Amcrest Bullet Camera in 2026 easy guide is a must-have skill for any homeowner, business owner, or tech-savvy user.

Whether you’re locked out, fixing a network issue, or prepping a camera for a new location, a factory reset is your go-to fix—and it’s simpler than you think.

Just remember:

• Locate the reset button (often on the cable, not the body).
• Hold it for 10–15 seconds.
• Reboot, reconnect, and reconfigure.
• Always change the default password.

Don’t wait until you’re stuck. Bookmark this guide, keep a paperclip handy, and save your Wi-Fi details.

Your Amcrest Bullet Camera will stay reliable, secure, and ready—no matter what happens.

Now go reset with confidence. Your peace of mind is worth it.