Introduction
Foscam Fi9821W is a popular security camera. Sometimes, it needs a reset. This guide will show you how to do it. Follow the steps below.
Why Reset Your Foscam Fi9821W?
There are many reasons to reset your camera. Maybe you forgot the password. Or, the camera is not working well. Resetting can fix many problems.
What You Need
- Your Foscam Fi9821W camera
- A small pin or paperclip
- Access to the camera’s power source
Step-by-Step Guide
Follow these steps to reset your Foscam Fi9821W camera:
Step 1: Locate The Reset Button
Find the reset button on your camera. It is usually at the back or bottom of the camera. It is a small hole.
Step 2: Power Off The Camera
Unplug the camera from the power source. Wait for 10 seconds. This will ensure the camera is completely off.
Step 3: Insert The Pin
Take your pin or paperclip. Insert it into the reset hole. Press and hold the button inside. Do this for 10 seconds.
Step 4: Power On The Camera
Plug the camera back into the power source. Keep holding the reset button for another 10 seconds. Then, release the button.
Step 5: Wait For The Reset
The camera will take a few minutes to reset. You will see the camera lights blinking. This means the reset is working.
Step 6: Reconfigure Your Camera
Once the reset is done, you need to set up the camera again. Use the Foscam app or web interface. Follow the setup instructions provided by Foscam.
Common Issues and Troubleshooting
Sometimes, problems can occur. Here are some common issues and how to fix them:
Issue 1: Camera Not Resetting
If the camera does not reset, try these steps:
- Make sure you hold the reset button for 20 seconds.
- Check the power source. Ensure it is working.
- Try a different pin or paperclip.
Issue 2: Camera Not Connecting To Wi-fi
If the camera does not connect to Wi-Fi, try these steps:
- Ensure the Wi-Fi password is correct.
- Move the camera closer to the router.
- Restart your router.
Issue 3: Camera Not Showing Video
If the camera does not show video, try these steps:
- Check the camera lens. Make sure it is clean.
- Ensure the camera is powered on.
- Update the camera firmware.
Tips for Maintaining Your Foscam Fi9821W
Keep your camera working well with these tips:
- Place the camera in a dry area.
- Clean the camera lens regularly.
- Update the camera firmware often.
- Check the power source and cables.
Conclusion
Resetting your Foscam Fi9821W is easy. Follow the steps in this guide. If you have problems, check the troubleshooting tips. Keep your camera maintained for best performance.