Do you have a Lorex Floodlight Camera? Sometimes, it might need a reset. This guide will help you reset your camera. Follow the steps below.
Why Reset Your Lorex Floodlight Camera?
There are many reasons to reset your camera. It can fix issues. It can also help if you forgot your password. Sometimes, a reset is the best solution.
Before You Start
Make sure you have a few things ready:
- Your Lorex Floodlight Camera
- A small pin or paperclip
- Your Wi-Fi information
- Your smartphone or tablet
Steps to Reset Your Lorex Floodlight Camera
Follow these steps to reset your camera:
Step 1: Locate The Reset Button
First, find the reset button. It is usually on the back of the camera. Look for a small hole. This is where the button is hidden.
Step 2: Press And Hold The Reset Button
Use a pin or paperclip. Insert it into the hole. Press and hold the button for 15 seconds. You will see the camera light blink. This means the reset is happening.
Step 3: Wait For The Camera To Restart
After you release the button, wait. The camera will restart on its own. This can take a few minutes. Be patient.
Step 4: Reconnect To Wi-fi
Once the camera restarts, you need to reconnect it to Wi-Fi. Open the Lorex app on your smartphone or tablet. Follow the instructions to connect the camera to your Wi-Fi network.
Step 5: Set Up The Camera Again
After connecting to Wi-Fi, set up the camera again. Follow the app instructions. This will include setting a new password. Make sure to write it down this time.
Common Issues and Solutions
Sometimes, things do not go as planned. Here are some common issues and how to fix them:
Camera Not Connecting To Wi-fi
If your camera does not connect to Wi-Fi, check these:
- Make sure the Wi-Fi password is correct.
- Check if your Wi-Fi is working.
- Move the camera closer to the Wi-Fi router.
Camera Light Not Blinking
If the camera light does not blink, try these:
- Make sure you are holding the reset button long enough.
- Check if the camera has power.
- Try using a different pin or paperclip.
App Not Detecting Camera
If the app does not detect the camera, check these:
- Make sure your phone is connected to the same Wi-Fi.
- Restart the Lorex app.
- Restart your phone.
Conclusion
Resetting your Lorex Floodlight Camera is simple. Just follow the steps. If you face issues, check the common solutions. Now, you know how to reset your camera. Keep your home safe and secure.