Is your Ring Doorbell flashing red and blue, leaving you confused and unsure what to do next? You’re not alone.
This unusual light pattern can feel frustrating, especially when you rely on your doorbell for security and peace of mind. But don’t worry—understanding what those flashing colors mean is the first step to fixing the problem quickly. Keep reading, and you’ll learn exactly why this happens and how to get your Ring Doorbell back to working perfectly.
Ring Doorbell Lights
The Ring Doorbell uses different light colors to show its status. Normal colors include white, green, and blue. White means the doorbell is ready. Green shows it is charging or connected to Wi-Fi. Blue indicates it is starting or updating.
A flashing red and blue light means the doorbell has a problem. It often shows a Wi-Fi connection issue or a device error. This blinking warns you to check your device or network.
Try restarting your Ring Doorbell or your Wi-Fi router. Make sure the doorbell is in range of your Wi-Fi signal. If the problem stays, check the Ring app for more help. This flashing light helps you know when the doorbell needs attention.
Causes Of Red And Blue Flashing
Power issues are a common cause of the red and blue flashing lights on a Ring Doorbell. The device might have a low battery or poor connection to its power source. Check the battery level or wiring to fix this problem quickly.
Wi-Fi connectivity problems can also cause these flashing lights. The doorbell needs a strong internet connection to work properly. Weak Wi-Fi signals or network interruptions can make the lights flash red and blue. Moving the router closer or resetting it can help.
Device firmware updates might cause the light to flash. The doorbell uses these updates to improve its functions. During the update process, the lights may blink red and blue. Wait for the update to finish before using the device again.
Hardware malfunctions are less common but possible. Damaged parts inside the doorbell can trigger the flashing lights. If other solutions do not work, contact support or consider replacing the device.
Troubleshooting Steps
Check the power supply first. Make sure the Ring Doorbell is properly connected to power. A loose wire or low battery can cause the red and blue light. Try plugging it into a different outlet or charging the battery fully.
Restart the device by pressing the button on the back for 20 seconds. This can fix many small issues. Wait a minute, then check if the lights stop flashing.
Reset to factory settings if restarting does not help. Hold the reset button for 30 seconds until the light turns off. This will erase all settings, so you must set it up again.
Update firmware manually through the Ring app. An old firmware might cause problems. Check the app for any update alerts and follow the instructions to install the latest version.
Improve Wi-Fi signal by moving your router closer or using a Wi-Fi extender. A weak signal can make the Ring Doorbell show red and blue lights. Strong Wi-Fi helps the device work smoothly.
When To Contact Support
A persistent red and blue flashing light on your Ring Doorbell usually signals a problem. This means the device cannot complete its startup process or connect properly. When the device is not responding to button presses or app controls, it needs attention.
Try restarting the doorbell first by pressing the reset button. If the issue remains, check your internet connection. A weak Wi-Fi signal can cause these flashing lights. Still no change? Contact Ring support for help.
| Issue | Action |
|---|---|
| Persistent red and blue flashing | Restart device; check Wi-Fi; contact support if unresolved |
| Device not responding | Try reset; test doorbell button; seek help if needed |
| Warranty and repair options | Check purchase date; review warranty terms; request repair |
Warranty covers defects for a limited time. Keep your receipt handy. Repairs or replacements may be free under warranty. Support can guide you through the process.
Preventing Future Issues
Keeping your Ring Doorbell working well needs some simple steps. Regular firmware updates fix bugs and add new features. These updates keep the device secure and smooth.
A stable power source is very important. If the power is weak or cuts off, the doorbell might flash red and blue. Use a reliable charger or battery to avoid problems.
A strong Wi-Fi connection helps the doorbell stay connected. Slow or weak Wi-Fi can cause errors and flashing lights. Place the router near the doorbell or use a signal booster for better Wi-Fi.
Frequently Asked Questions
Why Is My Ring Doorbell Flashing Red And Blue Lights?
The red and blue lights usually mean the device is updating or rebooting. Wait a few minutes.
How Do I Fix Ring Doorbell Flashing Red And Blue?
Restart your Ring Doorbell by pressing the reset button or unplugging it for 30 seconds.
Does Flashing Red And Blue Affect Ring Doorbell Performance?
Yes, it may stop the doorbell from working until the update or reboot finishes.
Conclusion
The Ring Doorbell flashing red and blue means it needs attention. Check the battery and Wi-Fi connection first. Sometimes, a quick reset solves the problem. Keeping your doorbell updated helps it work well. Remember, regular maintenance prevents future issues. Stay calm and follow simple steps to fix it.
Your doorbell will work smoothly again soon.