Is your Ring Doorbell Pro showing a flashing blue circle, and you’re not sure what it means? That little blinking light can feel confusing, especially when you rely on your doorbell to keep your home safe.
But don’t worry—understanding why this happens and what you can do about it is easier than you think. Keep reading, and you’ll learn exactly what the flashing blue circle means, how to fix common issues, and how to get your Ring Doorbell Pro working smoothly again.
This quick guide will save you time and frustration.
Ring Doorbell Pro Basics
The Ring Doorbell Pro has many useful features. It lets you see who is at your door through your phone. The device has a clear video camera and two-way talk. The motion sensor alerts you when someone is near. It also works with Alexa for voice commands.
Installing the Ring Doorbell Pro is simple. First, turn off the power at the breaker. Use the mounting bracket to fix the doorbell on the wall. Connect the wires to the doorbell terminals. Attach the doorbell to the bracket and turn the power back on. Finally, use the Ring app to complete setup and connect to Wi-Fi.
Blue Circle Flashing Meaning
The blue circle flashing on the Ring Doorbell Pro shows its current status. It means the doorbell is starting up or connecting to Wi-Fi. This light helps users know if the device is ready to work or needs attention.
Common reasons for the blue light flashing:
- The doorbell is booting up after power on.
- The device is trying to connect to the Wi-Fi network.
- It is updating its software or firmware.
- The doorbell is in setup mode for new installation.
If the blue circle keeps flashing for a long time, it may mean the device cannot connect to Wi-Fi. Checking the internet connection or restarting the doorbell can help solve the issue.
Troubleshooting Blue Circle Issues
Network connectivity problems often cause the blue circle to flash. Check if the Ring Doorbell is near your Wi-Fi router. Walls or other objects can block the signal. Restart the router and the doorbell to refresh the connection. A stable Wi-Fi signal is essential for proper function.
Power supply issues might also cause the blue light. Make sure the doorbell battery is charged or the wires are properly connected. Use the recommended power adapter for best results. Insufficient power can stop the device from working correctly.
Keeping the firmware updated is important. Updates fix bugs and improve performance. Open the Ring app to check for updates. Install any available updates to prevent the blue circle from flashing. Updated software helps the device run smoothly and stay secure.
Resetting Your Ring Doorbell Pro
Soft Reset clears minor glitches without erasing settings. Press and hold the button on the back of the Ring Doorbell Pro for about 15 seconds. Release the button when the light flashes blue. Wait for the device to restart and reconnect to Wi-Fi. This usually fixes small issues quickly.
Hard Reset Process restores the doorbell to factory settings. Press and hold the button for 20 seconds or more. Keep holding until the light turns off and then blinks. This will erase all settings, including Wi-Fi and preferences. Set up the doorbell again using the Ring app after the reset completes. Use this only if the soft reset does not work.
Preventing Future Blue Circle Flashes
Strong Wi-Fi is key to stopping the blue circle flash. Keep the router close to the doorbell for better signal.
Use a Wi-Fi extender if the signal is weak. Check the internet speed often. A slow connection can cause issues.
Updating the Ring Doorbell’s firmware helps fix bugs and improve performance. Check for updates regularly in the app.
Restart the device after each update to apply changes. This keeps the doorbell running smoothly.
Clean the doorbell and its surroundings. Dust or dirt can block signals and cause flashing problems.
When To Contact Support
The Ring Doorbell Pro shows a flashing blue circle when it has trouble connecting. This can mean the device is stuck or waiting for setup. Other signs needing help include the doorbell not ringing or the app not working properly.
To get help, visit the official Ring Support website. You can find live chat, phone numbers, and email options. Support is available to guide you step-by-step to fix problems.
| Signs You Need Help | How to Reach Ring Support |
|---|---|
| Flashing blue circle stays too long | Go to Ring.com/support |
| Device does not ring | Use live chat for quick answers |
| App does not connect to doorbell | Call Ring support phone number |
| Setup process fails repeatedly | Send an email explaining the issue |
Frequently Asked Questions
What Does The Blue Circle Mean On Ring Doorbell Pro?
The blue circle means the doorbell is starting up or connecting to Wi-Fi.
Why Is My Ring Doorbell Pro Flashing A Blue Light?
A flashing blue light shows the device is trying to join your home network.
How To Fix Ring Doorbell Pro Flashing Blue Circle Issue?
Restart the doorbell and check your Wi-Fi settings to fix the flashing blue circle.
Conclusion
The flashing blue circle on your Ring Doorbell Pro signals an important status. It often means the device is updating or connecting to Wi-Fi. Waiting a few minutes usually solves the issue. Make sure your internet is strong and stable.
Restarting the doorbell can also help fix the problem. Knowing these simple steps saves time and stress. Stay patient and keep your device updated for the best performance. Your Ring Doorbell Pro will work smoothly again soon.