Is your Ring Doorbell Pro flashing a white light and you’re not sure what it means? You’re not alone.
That flashing white light can feel confusing, especially when you rely on your doorbell for home security and convenience. But don’t worry—understanding what this light signals can help you quickly fix any issues and get your doorbell working smoothly again.
You’ll discover the simple reasons behind the flashing white light and easy steps you can take to solve the problem. Keep reading to make sure your Ring Doorbell Pro stays reliable and ready to protect your home.
White Light Patterns
The solid white light means the Ring Doorbell Pro is idle and ready. It is connected to power but not recording or streaming. The spinning white light shows the doorbell is in setup mode, trying to connect to Wi-Fi, or restarting. A flashing white light signals an error during setup. The position of the flashing light helps identify the problem:
| Light Position | Meaning |
|---|---|
| Top | Wrong Wi-Fi password entered |
| Right | Failed to connect to phone during setup |
| Left | General setup issue (router or network problem) |
The doorbell may also be updating firmware. Let it finish without interruption. For wired models, a flashing white light at the bottom shows a low voltage issue. Check wiring and transformer power to fix this.
Common Causes
Setup errors often cause the Ring Doorbell Pro to flash white. This happens when the device cannot connect to your Wi-Fi or phone. Entering the wrong Wi-Fi password is a common mistake. The doorbell may also fail to pair with your phone during setup. Sometimes, network issues or router problems stop the setup process. These cause the white light to flash on different parts of the device, showing where the problem lies.
Firmware updates can make the white light flash too. During updates, the doorbell shows a flashing white light to signal progress. It is best to let the update finish without interruption. Interrupting updates can cause more issues.
Power and wiring issues may cause flashing white light in wired models. Low voltage or loose wiring can trigger this. Check that the wiring connections are tight and correct. The transformer should meet the doorbell’s power needs. Fixing power problems often stops the flashing white light.
Troubleshooting Setup Errors
Incorrect Wi-Fi Password causes the Ring Doorbell Pro to flash white. Double-check the password carefully. Enter it exactly as it appears. A wrong password stops connection and setup. Try reconnecting after correcting the password.
Phone Connection Failures may happen if your phone’s Bluetooth or Wi-Fi is off. Make sure both are enabled. Keep your phone near the doorbell during setup. Restart the Ring app if needed. This helps the phone link to the device properly.
Network and Router Problems can block the doorbell from connecting. Restart your router to fix temporary issues. Ensure the router supports 2.4 GHz Wi-Fi, as Ring devices often need it. Check for any firewall or settings that might stop the doorbell from joining the network.
Resolving Firmware Update Issues
The firmware update process for Ring Doorbell Pro shows a white light. It is normal to see the light flashing or spinning during updates. Interrupting the update can cause problems, so patience is key.
Intervene only if the white light stays flashing for more than 30 minutes. This might mean the update got stuck. Before acting, check your internet connection and power supply. A weak Wi-Fi signal can slow the update.
Do not reset or unplug the device too soon. Wait and watch for the light to turn solid white, which means the update finished. If the light keeps flashing, try restarting your router or moving the doorbell closer to the Wi-Fi source.
Fixing Power And Wiring Problems
Check all wiring connections carefully for any loose or damaged wires. A loose wire can cause the Ring Doorbell Pro to flash a white light. Make sure each wire is tightly connected to the correct terminal. Look for any corrosion or dirt that might block the connection and clean it if needed.
Verify the transformer powering your doorbell is compatible. The Ring Doorbell Pro needs a transformer that supplies 16-24 volts AC and at least 30 VA power. Using a transformer with lower voltage or power can cause flashing white lights due to low voltage. If unsure, check the transformer’s label or manual to confirm it meets these requirements.
| Transformer Specs | Requirement |
|---|---|
| Voltage | 16-24 volts AC |
| Power (VA) | At least 30 VA |
App And Firmware Maintenance
Keeping the Ring app updated is essential for smooth doorbell operation. Updates often fix bugs and improve security. Open your device’s app store and check for the latest Ring app version. Install updates promptly to avoid issues.
Updating the doorbell firmware ensures your device runs well. The firmware update happens automatically when the doorbell is connected to Wi-Fi and the Ring app is open. Avoid turning off the doorbell or disconnecting Wi-Fi during this process. The white light usually flashes during updates.
Additional Tips
Restarting the Ring Doorbell Pro can often solve flashing white light issues. Press and hold the button on the back of the device for about 15 seconds. This action will power cycle the doorbell. Wait for the light to stop flashing and turn solid white again. This process helps refresh the device’s connection and settings.
Resetting the Doorbell is a more thorough step. Find the reset button, usually located on the back or inside the device. Use a paperclip to press and hold it for 20 seconds. Release the button and wait for the doorbell to restart. The light will flash to show it is resetting. This clears any errors and restores factory settings. Use resetting only if restarting does not fix the problem.
Frequently Asked Questions
What Does The White Light Mean On A Ring Doorbell?
A white light on a Ring Doorbell indicates idle mode, setup mode, or a firmware update. Spinning means setup or Wi-Fi connection. Flashing signals setup errors or low voltage in wired models. Check Wi-Fi password, router, and wiring to resolve issues.
Why Is My Blink Doorbell Flashing White?
A Blink doorbell flashing white usually means it’s in setup mode, updating firmware, or experiencing a connection error. Check Wi-Fi and app settings to resolve.
What Does A White Light Mean On A Ring?
A white light on a Ring indicates idle mode, setup mode, firmware update, or connection errors. Solid means idle, spinning means setup, flashing shows errors or updates.
Conclusion
A flashing white light on your Ring Doorbell Pro shows setup or connection issues. Check your Wi-Fi password carefully and restart your router if needed. Make sure the Ring app and device firmware are updated. If the light spins, the doorbell is trying to connect or restart.
For wired models, check wiring and power supply if the white light flashes at the bottom. These simple steps often fix common problems quickly. Staying patient during updates helps your doorbell work smoothly. Keep these tips handy for easy troubleshooting anytime.