What Is the Default IP Address for Hikvision NVR Revealed

The default IP address for Hikvision NVR is 192.168.1.64, a critical starting point for initial setup and network configuration. This address allows seamless access to the NVR’s web interface for firmware updates, camera management, and security settings—ensuring smooth integration into your surveillance system. Always verify the IP via the local network if changes occur.

Key Takeaways

• Default IP is 192.168.1.64: Use this to access your Hikvision NVR initially.
• Reset if forgotten: Hold reset button 20+ seconds to restore defaults.
• Check via SADP tool: Scan network to find NVR’s current IP address.
• Change for security: Always update default IP to prevent unauthorized access.
• Match subnet mask: Ensure devices share the same subnet for connectivity.
• Document new settings: Save updated IP details for future troubleshooting.

Why You Might Be Searching for the Default IP Address of a Hikvision NVR

Imagine this: You’ve just unboxed your shiny new Hikvision NVR (Network Video Recorder), ready to set up your home or business security system. You plug it in, connect your cameras, and fire it up—only to hit a wall. Your computer doesn’t detect the device. The screen stays blank. You start to panic. “Wait… what’s the default IP address for this thing?”

You’re not alone. Whether you’re a seasoned IT pro or a first-time security system installer, this moment is familiar to almost everyone who’s worked with Hikvision NVRs. The default IP address is the gateway to accessing your NVR’s settings, configuring cameras, and ensuring everything runs smoothly. But here’s the catch: it’s not always easy to find, and if you don’t know it, you’re stuck in setup limbo. That’s why understanding the default IP address for Hikvision NVR isn’t just helpful—it’s essential.

Understanding Hikvision NVRs and Their Network Role

Before we dive into the IP address itself, let’s take a moment to understand what a Hikvision NVR actually does. Think of it as the “brain” of your surveillance system. It records video from your IP cameras, stores it on a hard drive, and lets you view, manage, and back up footage—either locally or remotely.

Unlike older analog systems (DVRs), NVRs use digital data transmitted over a network. That means they rely heavily on IP (Internet Protocol) addresses to communicate with your router, your cameras, and your viewing devices (like computers or smartphones). Without the right IP configuration, your NVR becomes invisible to your network—like a phone without a number.

How IP Addresses Work in a Surveillance Setup

Every device on your local network needs a unique IP address to send and receive data. Your router assigns these automatically via DHCP (Dynamic Host Configuration Protocol), or you can manually set them as “static” IPs. A default IP address for Hikvision NVR is the factory-assigned address the device uses when it’s first powered on—before any configuration.

Here’s a real-world analogy: Think of the NVR as a new tenant in an apartment building (your network). The landlord (your router) hasn’t assigned them a mailbox (IP address) yet. But the tenant still needs to be found, so they post a temporary sign on the door: “I live at 192.168.1.100.” That’s the default IP. Once you meet them, you can help them update their mailbox number or let the landlord assign one.

This temporary address is crucial because it lets you connect directly to the NVR—even if it’s not yet on your network’s main IP range. It’s your first handshake with the device.

Why Default IPs Matter for Initial Setup

During setup, you’ll often need to access the NVR’s web interface or use Hikvision’s iVMS-4200 or SADP (Search Active Devices Protocol) tool to configure it. But these tools can’t find the NVR unless it’s reachable. That’s where the default IP comes in.

For example, if your home network uses the range 192.168.0.x, but the NVR’s default is 192.168.1.100, your computer won’t “see” it unless you temporarily change your computer’s IP to match the NVR’s subnet. This is a common hurdle—and one that trips up even experienced users.

Knowing the default IP helps you bypass this issue. You can either:

• Change your computer’s IP to match the NVR’s subnet
• Use a direct Ethernet connection between your PC and the NVR
• Use Hikvision’s SADP tool, which can discover devices even on different subnets

What Is the Default IP Address for Hikvision NVR?

Now, the moment you’ve been waiting for. The default IP address for Hikvision NVR is most commonly:

192.168.1.100

Yes, it’s that simple—for most models. But before you rush to type it into your browser, there are a few important nuances to understand.

Standard Default IP Across Most Models

The vast majority of Hikvision NVRs—including popular lines like the DS-7600, DS-7700, DS-9600, and DS-8600 series—ship with 192.168.1.100 as the default IP address. This has been consistent for over a decade, making it one of the most reliable defaults in the security industry.

For example, the DS-7604NI-K1/4P (a 4-channel NVR) uses this address out of the box. So does the DS-7716NI-I4/16P, a 16-channel model. Even newer models like the AcuSense series retain this default, though firmware updates may change behavior slightly.

You can usually confirm this by checking:

• The user manual (look for “Network Settings” or “Initial Configuration”)
• The label on the back or bottom of the NVR (some models print the IP here)
• Hikvision’s official support portal (search your model number)

Exceptions and Variations to Be Aware Of

While 192.168.1.100 is the standard, there are exceptions:

• Some older models (pre-2015) used 192.168.2.100 or 192.168.0.100. Always verify with your model’s manual.
• Custom firmware or pre-configured units (e.g., from integrators or resellers) may have a different default IP. If you’re not the first user, check with the installer.
• DHCP vs. Static: Some NVRs are set to obtain IP via DHCP by default. In this case, they won’t use 192.168.1.100 unless they can’t reach a DHCP server (like your router). If your router is on, the NVR might grab an IP like 192.168.0.150 instead.

Here’s a tip: If you’re not seeing the NVR at 192.168.1.100, it might be because it’s already connected to your router and received a different IP. That’s where discovery tools like SADP come in handy (more on that later).

How to Confirm the Default IP for Your Specific Model

Never assume. Always verify. Here’s how:

1. Go to Hikvision’s official website and search for your NVR model.
2. Download the user manual (PDF).
3. Look for the “Network Setup” or “Getting Started” section.
4. Check the “Default Settings” table.

For example, in the DS-7608NI-K2/8P manual, it clearly states: “The default IP address is 192.168.1.100.” This kind of documentation is your best friend.

How to Access Your Hikvision NVR Using the Default IP

Knowing the IP is one thing. Actually connecting to it? That’s where the real work begins. Let’s walk through the process step by step.

Method 1: Direct Ethernet Connection (Most Reliable)

This is the gold standard for initial setup. It eliminates router interference and ensures you’re on the same subnet as the NVR.

1. Power off the NVR and your computer.
2. Connect them directly using an Ethernet cable (no router or switch needed).
3. Power on the NVR.
4. On your computer, go to Control Panel > Network and Sharing Center > Change adapter settings.
5. Right-click your Ethernet connection > Properties > IPv4 > Use the following IP address.
6. Set:
   • IP: 192.168.1.50
   • Subnet mask: 255.255.255.0
   • Leave gateway and DNS blank
7. Open a web browser and go to http://192.168.1.100.
8. You should see the Hikvision login screen. Default credentials are usually admin / 12345 (more on this below).

Pro tip: Use a static IP like 192.168.1.50 (not .100) to avoid conflicts. The NVR is at .100, so your computer needs a different address on the same subnet.

Method 2: Using Hikvision SADP Tool (No IP Changes Needed)

The SADP (Search Active Devices Protocol) tool is a lifesaver. It scans your network and lists all Hikvision devices, even if they’re on different subnets.

1. Download SADP from Hikvision’s website (free).
2. Install and run it on a computer connected to your network.
3. Click “Refresh.” It will scan and display all Hikvision devices.
4. Look for your NVR. It will show its current IP, MAC address, and model.
5. If the IP is 192.168.1.100, you can click “Modify IP” to change it to match your network (e.g., 192.168.0.100).
6. Once changed, open your browser and go to the new IP.

Why this is great: You don’t have to mess with your computer’s IP settings. SADP handles the discovery for you.

Method 3: Browser Access After Network Integration

Once the NVR is on your network (via DHCP or manual setup), you can access it from any device on the same network.

• Find its IP using SADP or your router’s admin panel (look for “Connected Devices”).
• Open a browser and type: http://[NVR-IP] (e.g., http://192.168.0.100)
• Log in with your credentials.

Note: Use a modern browser (Chrome, Firefox, Edge). Avoid Internet Explorer—it’s no longer supported by Hikvision.

Common Issues and Troubleshooting Tips

Even with the right IP, things can go wrong. Here are the most common hiccups and how to fix them.

“I Can’t Access 192.168.1.100 – Page Not Found”

This is the #1 complaint. Here’s what to check:

• Subnet mismatch: Your computer must be on the 192.168.1.x subnet. If your network is 192.168.0.x, you won’t reach it. Use the direct connection method above.
• NVR not in factory state: If the NVR was previously configured, the IP might have been changed. Use SADP to find it.
• Firewall blocking: Temporarily disable your firewall or antivirus to test.
• Faulty cable or port: Try a different Ethernet cable or port on the NVR.

“Login Failed – Invalid Credentials”

The default login is usually admin / 12345, but there are exceptions:

• Some models use admin / admin
• Newer firmware may require you to set a password during first login (a security feature)
• If you’ve already logged in once, the default won’t work—you’ll need your custom password

Tip: If you forgot your password, you may need to reset the NVR to factory settings (usually via a reset button or jumper). This erases all data, so use it as a last resort.

“SADP Doesn’t Find My NVR”

If SADP shows no devices:

• Ensure the NVR is powered on and connected to the same network as your PC.
• Run SADP as administrator (right-click > Run as admin).
• Temporarily disable other network adapters (Wi-Fi, VPNs).
• Check if the NVR’s network cable is securely plugged in.
• Try a different computer—some network drivers interfere with SADP.

Best Practices After Finding the Default IP

Finding the IP is just the beginning. Here’s how to set up your NVR securely and efficiently.

Change the Default IP to Match Your Network

Never leave your NVR at 192.168.1.100 if your network uses 192.168.0.x. It creates a subnet mismatch, making remote access and camera discovery harder.

1. Log in to the NVR via web interface or iVMS-4200.
2. Go to Configuration > Network > TCP/IP.
3. Set a static IP in your network range (e.g., 192.168.0.100).
4. Set subnet mask and gateway (usually 255.255.255.0 and your router’s IP, like 192.168.0.1).
5. Save and reboot.

Set a Strong Admin Password

Default credentials are a security risk. Change them immediately:

• Use a mix of uppercase, lowercase, numbers, and symbols.
• Avoid common passwords like “password123” or “admin123”.
• Store it securely (password manager or physical notebook).

Hikvision’s newer models force you to set a password on first login—a great security move.

Enable HTTPS and Disable Telnet

By default, Hikvision NVRs use HTTP (unencrypted). For security:

• Go to Configuration > Network > HTTPS and enable it.
• Disable Telnet (a remote access protocol that’s vulnerable if left open).
• Consider enabling IP filtering to restrict access to specific devices.

Data Table: Default IPs and Credentials by Hikvision NVR Model

Model Series	Default IP	Default Username	Default Password	Notes
DS-7600 Series	192.168.1.100	admin	12345	Older models may use 192.168.2.100
DS-7700 Series	192.168.1.100	admin	12345	Supports PoE cameras
DS-9600 Series	192.168.1.100	admin	12345	High-end, 4K support
DS-8600 Series	192.168.1.100	admin	12345	Enterprise-grade, RAID support
AcuSense Series	192.168.1.100	admin	Set on first login	Forced password change for security
DeepinMind Series	192.168.1.100	admin	Set on first login	AI-powered, requires strong password

Final Thoughts: The Default IP Is Just the Starting Point

Finding the default IP address for Hikvision NVR—typically 192.168.1.100—is the first step in a much larger journey. It’s the key that unlocks your NVR’s configuration, but it’s only the beginning. From there, you’ll need to integrate it into your network, secure it, and set up your cameras.

Remember, every NVR is a little different. Always check your model’s manual, use tools like SADP, and don’t be afraid to experiment (in a safe way). And most importantly: change that default password. It’s not just a suggestion—it’s a necessity in today’s connected world.

Whether you’re setting up a single NVR for your home or managing a dozen in a business, knowing how to find and use the default IP gives you control. You’re not just installing a device—you’re building a security system that works for you. And now, you’ve got the knowledge to make it happen.

Frequently Asked Questions

What is the default IP address for Hikvision NVR?

The default IP address for most Hikvision NVRs is 192.168.1.64. This address allows initial access for configuration, but it can be changed via the device’s network settings or Hikvision’s SADP tool.

How do I find the default IP of my Hikvision NVR if it’s not 192.168.1.64?

If your NVR doesn’t respond to the standard IP, use Hikvision’s SADP (Search Active Devices Protocol) tool to scan your network. It detects all connected Hikvision devices and displays their current IP addresses, including the default IP address for Hikvision NVR.

Can I change the default IP address of my Hikvision NVR?

Yes, you can change the default IP address through the NVR’s web interface or local GUI under Network Settings. Assigning a static IP or configuring DHCP ensures better integration into your existing network setup.

Why can’t I connect to my Hikvision NVR using the default IP address?

If the default IP isn’t working, your NVR may have been assigned a different address via DHCP. Verify the current IP using the SADP tool or check your router’s connected devices list to locate the correct address.

Is the default IP address for Hikvision NVR the same for all models?

Most Hikvision NVR models use 192.168.1.64 as the default, but some newer or customized units may differ. Always consult your model’s user manual or use SADP to confirm the correct default IP address for Hikvision NVR.

Do Hikvision NVRs support automatic IP assignment (DHCP)?

Yes, Hikvision NVRs can use DHCP to obtain an IP address automatically from your router. However, for stable remote access, a static IP (like the default) is recommended to avoid connection issues due to IP changes.