Where Is the Reset Button on a Sricam Bullet Camera

Struggling to find the reset button on your Sricam bullet camera? You’re not alone. This guide walks you through the exact location, step-by-step reset process, and troubleshooting tips to get your camera back online fast.

Key Takeaways

• Reset Button Location: The reset button is typically a small, recessed pinhole on the back or bottom of the Sricam bullet camera, often labeled “Reset” or marked with a dot.
• Proper Reset Method: Use a paperclip or SIM ejector tool to press and hold the reset button for 10–15 seconds while the camera is powered on.
• Factory Reset vs. Reboot: A factory reset erases all settings and returns the camera to default, while a reboot simply restarts the device without losing configurations.
• When to Reset: Reset your camera if it’s unresponsive, won’t connect to Wi-Fi, or you’re setting it up on a new network.
• Post-Reset Setup: After resetting, reconfigure your camera via the Sricam app, including Wi-Fi credentials, motion detection, and recording settings.
• Common Mistakes to Avoid: Don’t press the button too briefly or use excessive force—this can damage the internal components.
• Troubleshooting Tips: If the reset doesn’t work, check power supply, firmware updates, or contact Sricam support for assistance.

Where Is the Reset Button on a Sricam Bullet Camera?

If you’ve ever found yourself staring at your Sricam bullet camera, wondering how to reset it, you’re not alone. Whether you’re setting up a new device, troubleshooting connection issues, or handing it over to someone else, knowing where the reset button is and how to use it properly is essential. The good news? It’s easier than you might think—once you know where to look.

Sricam bullet cameras are popular for home and business security due to their compact design, night vision, and remote viewing capabilities. But like any tech device, they can sometimes act up. Maybe your camera won’t connect to Wi-Fi, the app can’t find it, or you’ve forgotten the admin password. In these situations, a factory reset is often the quickest fix. But first, you need to locate that tiny, often hidden reset button.

In this guide, we’ll walk you through exactly where to find the reset button on a Sricam bullet camera, how to perform a reset safely, and what to do afterward. We’ll also cover common mistakes, troubleshooting tips, and answers to frequently asked questions. By the end, you’ll feel confident handling your camera like a pro—no tech degree required.

Why You Might Need to Reset Your Sricam Bullet Camera

Before we dive into the location of the reset button, let’s talk about why you’d want to reset your camera in the first place. Understanding the reasons behind a reset can help you decide whether it’s the right solution for your issue.

One of the most common reasons people reset their Sricam bullet camera is connectivity problems. If your camera suddenly stops appearing in the Sricam app or won’t connect to your Wi-Fi network, a reset can often restore the connection. This is especially true if you’ve recently changed your router, updated your network password, or moved the camera to a new location.

Another frequent scenario is forgotten login credentials. If you’ve set a custom admin password and can’t remember it, a factory reset will restore the default login (usually admin/admin or admin/123456), allowing you to regain access.

You might also need to reset the camera if you’re selling it, giving it to a friend, or repurposing it for a different location. A factory reset ensures that all personal data, including saved Wi-Fi networks and motion detection zones, are erased, protecting your privacy.

Lastly, if your camera is frozen, unresponsive, or behaving erratically—like showing a black screen or failing to record—resetting it can clear temporary glitches and restore normal operation.

Signs Your Camera Needs a Reset

So how do you know if a reset is necessary? Here are a few telltale signs:

• Camera not appearing in the app: You’ve tried refreshing, restarting the app, and even rebooting your phone—but the camera still won’t show up.
• Wi-Fi connection fails repeatedly: The camera keeps dropping offline or refuses to connect to your network, even after entering the correct password.
• Login errors: You’re getting “invalid password” messages, and you’re sure you’re entering the right credentials.
• Frozen or laggy video feed: The live view is stuck, buffering constantly, or not loading at all.
• Settings won’t save: You change motion sensitivity or recording schedules, but the camera reverts to previous settings.

If you’re experiencing any of these issues, a factory reset is a safe and effective first step. Just remember: a reset will erase all your custom settings, so only do it when necessary.

Locating the Reset Button on a Sricam Bullet Camera

Now for the main event: where exactly is the reset button on a Sricam bullet camera? The answer depends slightly on the model, but the general location is consistent across most Sricam bullet cameras.

The reset button is typically a small, recessed pinhole located on the back or bottom of the camera housing. It’s designed to be unobtrusive to prevent accidental presses, which is why it’s often overlooked. You’ll usually find it near the power input, Ethernet port (if applicable), or mounting bracket.

On many models, such as the SP005, SP006, or SP015, the reset button is on the back panel, just below the lens or beside the microSD card slot. It’s often labeled with the word “Reset” or marked with a tiny dot or arrow. Because it’s flush with the surface, you’ll need a thin, pointed object—like a paperclip, SIM ejector tool, or toothpick—to press it.

How to Identify the Reset Button

If you’re having trouble spotting it, here’s a simple way to identify the reset button:

1. Turn off the camera: For safety, unplug the power adapter or disconnect the camera from its power source.
2. Inspect the back and bottom: Look for a tiny hole, usually about 1–2mm in diameter. It’s often surrounded by a small circle or indentation.
3. Check for labels: Some models have “Reset” printed next to the hole. Others may use symbols like a circular arrow or a dot.
4. Compare with the user manual: If you still can’t find it, refer to the camera’s manual or visit the Sricam website for your specific model’s diagram.

For example, on the Sricam SP006, the reset button is located on the back, just to the right of the microSD card tray. On the SP015, it’s on the bottom edge, near the mounting screw hole. Once you’ve located it, you’re ready to perform the reset.

Tools You’ll Need

To press the reset button, you’ll need a thin, rigid tool. Here are some common options:

• Paperclip: Straighten one end and use the tip to press the button.
• SIM ejector tool: These small metal pins come with smartphones and are perfect for this task.
• Safety pin or needle: Only use if the tip is blunt to avoid damaging the internal mechanism.
• Toothpick: Works in a pinch, but be gentle—wood can break off inside the hole.

Avoid using sharp objects like knives or scissors, as they can damage the button or scratch the camera housing.

Step-by-Step Guide to Resetting Your Sricam Bullet Camera

Now that you’ve found the reset button, it’s time to perform the factory reset. Follow these steps carefully to ensure a successful reset without damaging your camera.

Step 1: Power On the Camera

Before pressing the reset button, make sure the camera is powered on. Plug it into a power source using the included adapter. Wait for the camera to fully boot up—this usually takes 30–60 seconds. You’ll know it’s ready when the LED light turns solid (usually blue or green) and the lens adjusts or makes a soft clicking sound.

Step 2: Locate and Press the Reset Button

Using your paperclip or SIM ejector tool, gently insert the tip into the reset button hole. Press firmly but not forcefully—just enough to activate the internal switch. Hold the button down for 10–15 seconds. You don’t need to press it repeatedly; a steady hold is sufficient.

During this time, the camera’s LED light may blink rapidly or change color. This is normal and indicates the reset process is underway.

Step 3: Release and Wait

After holding the button for 10–15 seconds, release it. The camera will automatically restart. This may take 1–2 minutes. You’ll see the LED light cycle through colors (often red, then blue) as the camera reboots and restores factory settings.

Step 4: Confirm the Reset

Once the camera finishes rebooting, the LED should return to a steady state (usually blue). At this point, the camera has been reset to factory defaults. All previous settings—including Wi-Fi passwords, motion zones, and recording schedules—have been erased.

Step 5: Reconfigure the Camera

Now it’s time to set up your camera again. Download the Sricam app (available for iOS and Android), create or log in to your account, and follow the on-screen instructions to add the camera. You’ll need to:

• Scan the QR code on the camera or enter the device ID manually.
• Connect the camera to your Wi-Fi network by entering your password.
• Set a new admin password (strongly recommended for security).
• Configure motion detection, recording settings, and notifications.

Tip: Write down your new password and store it securely. If you forget it, you’ll need to reset the camera again.

Common Mistakes to Avoid When Resetting

While resetting a Sricam bullet camera is straightforward, there are a few common mistakes that can cause problems or even damage the device. Here’s what to avoid:

Pressing the Button Too Briefly

One of the most frequent errors is not holding the reset button long enough. If you press it for only 2–3 seconds, the camera may simply reboot instead of performing a factory reset. Always hold it for at least 10 seconds to ensure the reset completes.

Using Excessive Force

The reset button is delicate. Pressing too hard with a sharp object can damage the internal switch or crack the camera housing. Use gentle, steady pressure—just enough to activate the button.

Resetting While Offline

Always ensure the camera is powered on and fully booted before resetting. Resetting while the camera is off or in the middle of a firmware update can cause software corruption.

Skipping Post-Reset Setup

After a reset, don’t assume the camera will automatically reconnect to your network. You must reconfigure it through the app. Skipping this step means the camera won’t function properly.

Forgetting to Update Firmware

After resetting, check for firmware updates in the Sricam app. Updated firmware can fix bugs, improve performance, and enhance security.

Troubleshooting After a Reset

Sometimes, even after a proper reset, your Sricam bullet camera may still have issues. Here’s how to troubleshoot common post-reset problems.

Camera Still Won’t Connect to Wi-Fi

If the camera won’t connect after a reset, try these steps:

• Ensure your Wi-Fi network is 2.4GHz (most Sricam cameras don’t support 5GHz).
• Move the camera closer to the router during setup.
• Double-check the Wi-Fi password—typos are common.
• Restart your router and try again.

App Can’t Find the Camera

If the Sricam app doesn’t detect the camera:

• Make sure both your phone and camera are on the same network.
• Enable location permissions for the app (required for device discovery).
• Try adding the camera manually using the device ID.

LED Light Won’t Turn On

If the camera doesn’t power on after a reset:

• Check the power adapter and cable for damage.
• Try a different power outlet.
• Ensure the camera isn’t overheating—let it cool down before retrying.

Factory Reset Didn’t Work

In rare cases, the reset may not take effect. If this happens:

• Repeat the reset process, holding the button for a full 15 seconds.
• Try a different reset tool (e.g., switch from paperclip to SIM ejector).
• Contact Sricam customer support for assistance or a possible replacement.

Tips for Maintaining Your Sricam Bullet Camera

To avoid frequent resets and keep your camera running smoothly, follow these maintenance tips:

• Keep firmware updated: Check for updates monthly in the Sricam app.
• Use a stable power source: Avoid cheap adapters or extension cords that can cause power fluctuations.
• Clean the lens regularly: Wipe with a microfiber cloth to maintain clear video quality.
• Secure your network: Use a strong Wi-Fi password and enable WPA2 encryption.
• Monitor storage: If using a microSD card, format it periodically and replace it if it becomes corrupted.

By taking care of your camera, you’ll reduce the need for resets and enjoy reliable performance for years.

Conclusion

Finding the reset button on a Sricam bullet camera might seem tricky at first, but once you know where to look, it’s a simple process. Located on the back or bottom of the camera, this small pinhole allows you to restore factory settings and resolve many common issues. Whether you’re troubleshooting connectivity, forgetting your password, or preparing the camera for a new user, a reset is a powerful tool.

Remember to use a paperclip or SIM ejector tool, hold the button for 10–15 seconds, and reconfigure the camera afterward. Avoid common mistakes like pressing too briefly or using excessive force. And if problems persist, don’t hesitate to reach out to Sricam support.

With this guide, you’re now equipped to handle your Sricam bullet camera like a pro. Keep it powered, keep it connected, and enjoy peace of mind knowing your security system is always ready to protect what matters most.

Frequently Asked Questions

Where exactly is the reset button on a Sricam bullet camera?

The reset button is a small, recessed pinhole typically located on the back or bottom of the camera, often near the power input or microSD slot. It’s usually labeled “Reset” or marked with a dot.

How long should I hold the reset button?

Hold the reset button for 10–15 seconds while the camera is powered on. This ensures a full factory reset rather than just a reboot.

Will resetting my camera delete my recordings?

Yes, a factory reset erases all settings and data, including saved recordings on the microSD card. Back up important footage before resetting.

Can I reset the camera remotely?

No, the reset button must be pressed physically. There is no remote reset option in the Sricam app.

What if the reset button doesn’t work?

If the reset doesn’t work, try using a different tool, ensure the camera is powered on, or contact Sricam customer support for assistance.

Do I need to reconnect to Wi-Fi after a reset?

Yes, after a factory reset, you must reconfigure the camera through the Sricam app, including reconnecting to your Wi-Fi network and setting a new password.