Troubleshooting Guide: Why Your Blink Camera Isn’t Recording and What to Do About It

Have you ever encountered a situation where your Blink camera suddenly stops recording? It could be frustrating, especially when you need it for surveillance purposes. As convenient as Blink cameras are, they are known to have issues when it comes to recording. Various factors can cause Blink cameras to stop recording, and in this blog, we’ll explore some of these issues and how to fix them.

Whether you’re a new user or an experienced one, this blog is a must-read to ensure that your Blink camera is always up and running smoothly. So, let’s dive in and find out why Blink cameras may not be recording.

Camera Connection

If you’re experiencing issues with your Blink camera not recording, there could be a few reasons why. Firstly, check that your camera is connected to your Wi-Fi network and has a strong signal. If the connection is weak, it could be preventing the camera from recording.

Another potential issue could be a low battery level on the camera. If the battery is dying or dead, the camera won’t be able to record. Make sure to check the battery level and charge your camera if necessary.

Sometimes, the motion sensor on the camera can become blocked or obscured. Check to make sure the sensor is clean and free from any debris or obstructions. Finally, it’s possible that there’s an issue with the Blink app or the camera’s firmware.

Try resetting the camera or contacting customer support for further assistance. Overall, there are a few reasons why your Blink camera may not be recording, but most issues can be resolved with a little troubleshooting and attention.

Check Wi-Fi Connection

When you’re trying to connect your camera to your Wi-Fi, there are several things you need to check to ensure a successful connection. First and foremost, you need to make sure that you’re within range of your Wi-Fi network. This means being close enough to your router or access point so that the signal is strong enough for your camera to pick up.

If you’re too far away, the connection may be weak or non-existent, causing your camera to disconnect or fail to connect altogether. Another thing to check is whether you’ve entered the correct Wi-Fi password. This is a common mistake that can prevent your camera from connecting, so make sure you double-check the password you’re using.

Lastly, make sure that your router is functioning properly. If it’s experiencing issues, this can also cause your camera to lose its connection. By checking these things and taking appropriate measures, you can ensure a stable and reliable Wi-Fi connection for your camera.

why is my blink camera not recording

Ensure Camera is Online

Connecting your camera to your home Wi-Fi network ensures that the device is online and ready to be streamed on your phone or computer. Before starting, ensure that your Wi-Fi network is stable and that you have the correct login credentials. Then check if your camera is properly plugged in and turned on.

If everything is in order, connect your camera to your Wi-Fi network using the manufacturer’s app or instructions. Once connected, test your camera’s live feed to check if it is online and ready to use. If problems persist, troubleshoot your camera, checking for outdated firmware, blocked security settings, or issues with your Wi-Fi network.

By ensuring that your camera is online, you gain peace of mind and the convenience of remotely checking in on your home or loved ones. Happy streaming!

Camera Setup

“Why is my Blink camera not recording?” is a question that many Blink camera owners might have asked themselves at some point. There could be several reasons why your Blink camera is not recording, such as an issue with the camera’s power source, connectivity problems, or insufficient storage space. One of the primary things you can do to troubleshoot the issue is to check the camera’s power source.

Ensure that the camera is properly connected to a reliable power source and that the batteries, if applicable, are not running low. Additionally, you may want to check the camera’s connectivity, which can be done by assessing the Wi-Fi network’s signal strength and the camera’s distance from the router. It’s also worth noting that Blink cameras offer cloud storage for recorded footage, which means that if there is insufficient storage space, you may need to purchase additional cloud storage.

By addressing these issues, you can resolve the problem of your Blink camera not recording and ensure that you have ample footage for any potential incidents.

Ensure Camera is Armed

Setting up your camera is an essential step before you start capturing precious moments. One of the crucial things to take care of is ensuring that your camera is armed. It means that your camera needs to be turned on and ready to shoot.

Ensuring that your camera is armed before you start recording or taking pictures can help you avoid missing any critical moments. So, before you start capturing those beautiful memories, take the time to check if your camera is armed. Additionally, it is also essential to keep an eye on your camera’s battery power and storage space to ensure you don’t miss out on any special moments.

Remember, the key to capturing great photos and videos is to be prepared and ready at all times. So, make sure you keep your camera armed and ready!

Check Recording Settings

When setting up your camera for recording, it’s important to check and adjust your recording settings to ensure the best quality footage possible. Start by selecting the right resolution and frame rate for your needs, based on the type of content you will be filming and the platform where it will be viewed. Keep in mind that higher resolutions and frame rates will require more storage space, so choose carefully.

Next, set your exposure and focus manually if possible, rather than relying on the camera’s automatic settings. This will give you greater control over the look and feel of your footage, and help avoid unwanted changes during recording. Once you’ve set up your camera, take a few test shots to make sure everything looks and sounds good before you start filming.

With a little bit of preparation and attention to detail, you can capture high-quality footage that will look great and stand out from the crowd.

Verify Camera Location

When setting up a new camera, it’s crucial to verify its location before you start your shoot. This easy but necessary step will ensure you get the best shots possible and avoid any last-minute stress or disappointment. One way to verify the camera’s placement is to use a preview monitor or a smartphone app to see the shot as you move the camera around.

You can also take test shots to check the angle and framing, making sure you avoid any distracting elements in the background. This step is especially important if you’re shooting in a crowded or busy location, where you may not have as much time or flexibility. By taking the time to verify the camera’s location, you’ll be able to capture stunning and memorable footage every time.

So, instead of winging it, take a few minutes to set up your camera correctly, and you won’t regret it when you’re reviewing your footage later.

Camera Troubleshooting

If your blink camera is not recording, it could be due to a few different reasons. First, make sure that your camera is properly connected to your Wi-Fi network and that your internet connection is strong. It’s also possible that the camera’s batteries are low or that the camera hasn’t been properly synced with the blink app.

Check to make sure that the camera is set up correctly and that it’s in the right location to capture the activity you’re trying to monitor. In some cases, the camera’s field of view may be obstructed by objects, so try moving it to a different location. Another potential issue could be a problem with the camera’s settings or firmware, which may require troubleshooting or a firmware update.

If you’re still experiencing issues with your blink camera not recording, you may want to contact the blink support team for additional assistance.

Check Camera Battery

When it comes to photography, there are few things more frustrating than finding the perfect shot and realizing your camera battery has died. To avoid this disappointment, always make sure to check your camera’s battery level before heading out to shoot. It sounds like a no-brainer, but it’s easy to forget in the rush of excitement.

Keep in mind that different cameras have different battery lives, so it’s important to familiarize yourself with how long your specific camera can go without needing to be charged. You can also invest in an extra battery, just in case you need a boost while you’re out and about. So, next time you plan a photography excursion, don’t forget to check that battery level and ensure that you have enough juice to capture every perfect moment.

Perform a Reset

If you’re having trouble with your camera, performing a reset may be the solution. This can help resolve any software issues that may be causing malfunctions or error messages. First, make sure to back up any important photos or settings, as a reset will erase all data on the camera.

Depending on your camera model, the steps to perform a reset may vary, but it typically involves accessing the settings menu and selecting the option to reset to default settings. After the reset is complete, you can then set up your camera again with new settings and preferences. Keep in mind that a reset should only be a last resort, after trying other troubleshooting options.

But if all else fails, it may be worth giving a reset a try to get your camera back up and running smoothly.

Contact Blink Support for Further Assistance

If you’re having trouble with your Blink camera not recording, contacting Blink support is always a good idea. There could be a number of reasons why your camera isn’t recording, like a weak WiFi signal, the motion detection settings aren’t configured correctly, or the camera needs a firmware update. Blink support can provide assistance in troubleshooting your camera, guiding you through any necessary steps to resolve the issue.

They can also offer information on how to optimize camera performance to ensure reliable recordings. Additionally, Blink support can help with any general questions or concerns you may have about your Blink camera. Don’t hesitate to reach out to Blink support for help, they are there to ensure you have the best user experience possible.


Well, my dear friend, the reason why your blink camera is not recording might be because it decided to take a break and catch up on its favorite TV shows, or perhaps it’s practicing its ninja skills so that it can catch intruders off guard. On a more serious note, it could be due to a technical glitch, a poor internet connection, or insufficient battery power. Therefore, it’s essential to troubleshoot and address any underlying issues to get your trusty camera back to its vigilant duty of monitoring your home or office space.

Remember, keep your eyes peeled, but don’t forget to give your blink camera some much-needed TLC from time to time.”


Why is my Blink camera not recording?
There could be several reasons why your Blink camera is not recording. It could be due to low battery or connectivity issues. Check your Wi-Fi signal and make sure your camera is properly connected to the Blink app.

How do I troubleshoot connectivity issues with my Blink camera?
You can troubleshoot connectivity issues by checking your Wi-Fi signal strength, moving the camera closer to the Wi-Fi router, or resetting your camera and Wi-Fi network.

Can I access my Blink camera remotely?
Yes, you can access your Blink camera remotely using the Blink app, provided that your camera is connected to the internet.

How long does the Blink camera battery last?
The battery life of a Blink camera can vary depending on usage and environmental factors. However, on average, the battery should last up to two years with normal usage. If you notice that your battery is draining quickly, consider replacing it with a new one.