Introduction

Let me start with a confession: I’ve had a Blink Video Doorbell for about eight months now, and for the longest time, it sat naked on my doorframe — just the adhesive backplate and a prayer. Every time I saw a neighborhood alert about porch pirates or someone tampering with a doorbell camera, my stomach would drop. The thing costs enough that losing it would hurt, but not so much that I wanted to drill holes in my rental’s doorframe to secure it properly.

That’s where the Blink Doorbell Mount entered my life. This 2nd Gen Anti-Theft mount promises to solve exactly my problem: all-around protection for both 1st and 2nd Gen Blink Video Doorbells, zero drilling required, and a rain cover thrown in for good measure — all for under ten bucks. On paper, it sounds like a no-brainer. But we all know how “easy install” products can turn into weekend-long frustrations.

I’ve spent the last three weeks living with this mount — through rainstorms, a heat wave, a few package deliveries, and one very curious neighborhood cat who seems convinced the camera is a personal affront. In this review, I’ll walk you through the unboxing experience, build quality, real-world performance in daily scenarios, the honest flaws nobody mentions in the marketing copy, and whether this $9.99 piece of hardware is actually worth your money.

What is the Blink Doorbell Mount?

The Blink Doorbell Mount is a purpose-built anti-theft mounting solution designed exclusively for the Blink Video Doorbell 1st Generation and 2nd Generation models. It’s important to note upfront — and the packaging makes this clear — this mount does not fit the 3rd Gen Blink Doorbell. If you have the newer model, you’ll need a different solution.

At its core, this is a two-piece system: a protective shell that encases your doorbell camera body, and a stainless steel bracket that clamps onto your door’s edge using a tension-based fixed clip. The entire assembly locks together with screws, creating a physical barrier that makes it extremely difficult for someone to simply yank the camera off the wall and walk away with it.

Key Specifications at a Glance

• Compatibility: Blink Video Doorbell 1st Gen & 2nd Gen only (NOT 3rd Gen)
• Door Type: Inward-opening doors only (left or right hinge)
• Door Thickness Range: 0.8 to 1.9 inches
• Door Frame Gap Required: Greater than 0.08 inches
• Material: High-impact ABS plastic shell + 304 stainless steel bracket
• Installation: No drilling, tension-mount clamp design
• Weather Protection: Extended rain cover included
• Dimensions: Approximately 5.2 x 2.8 x 2.1 inches (assembled)
• Weight: 6.3 ounces (179 grams)
• Color: Matte black

Target Audience

This mount is squarely aimed at three groups: renters who can’t drill into doorframes, homeowners who want theft deterrence without permanent modification, and anyone with an inward-swinging door that falls within the thickness specifications. If you have a steel security door, storm door, screen door, or outward-opening door, this product explicitly will not work for you — and I appreciate that the manufacturer is upfront about these limitations rather than letting you discover them after purchase.

Key Features of Blink Doorbell Mount

🎯 Anti-Theft Enclosure Design

The standout feature is the full-wrap protective shell. Unlike mounts that only secure the backplate, this design completely surrounds the camera body on all four sides. The Blink Doorbell slides into a precision-molded cavity, and then the stainless steel bracket bolts through reinforced screw points on the shell’s sides. Once assembled, there’s no way to remove the camera without a screwdriver and several minutes of uninterrupted time — exactly what a thief doesn’t have.

I tested this by having a friend try to remove it “quickly” while I timed them. Even knowing exactly how it works, it took them nearly four minutes with a Phillips head screwdriver. A random opportunist? They’d move on to an easier target.

🎯 Zero-Drill Tension Mounting System

The mounting bracket uses a spring-loaded fixed clip that clamps onto the edge of your door. You adjust the clip depth via a thumbscrew, slide it over the door’s top edge, and tighten until it’s snug. The stainless steel bracket has rubberized contact points that grip the door without marring the finish. For renters, this is huge — when you move out, you just loosen the thumbscrew and walk away. No holes, no putty, no angry landlord.

The system requires a door frame gap of at least 0.08 inches (about the thickness of two credit cards stacked). My front door has roughly 0.12 inches of clearance, and the mount seated perfectly. If your door sits flush against the frame with zero gap, this won’t work — but that’s a relatively rare scenario.

🎯 Extended Rain Cover Integration

The 2nd Gen mount adds an extended rain cover that projects about 1.5 inches beyond the camera lens. This isn’t just a cosmetic lip — it’s a functional overhang that directs water away from the motion sensor and lens area. During a particularly nasty three-day rainstorm last month, I checked the footage daily and saw zero water spots, fogging, or false motion triggers from rain hitting the sensor directly.

The cover also provides some shade during peak afternoon sun, which reduces the “washed out” effect you sometimes get when the sun hits the lens at a low angle. It’s a thoughtful addition that shows the designers actually thought about outdoor use cases.

🎯 Dual-Generation Compatibility

The internal cavity is dimensioned to accept both 1st and 2nd Gen Blink Video Doorbells. I tested with a 2nd Gen unit (the one with the slightly rounded corners), and it seated with a satisfying click. The screw holes align perfectly with both generations’ mounting points. This forward/backward compatibility is rare in the accessory world and saves you from re-buying if you upgrade your doorbell later.

🎯 304 Stainless Steel Bracket Construction

The mounting bracket isn’t cheap plated steel — it’s genuine 304 stainless. After three weeks of humidity, rain, and temperature swings from 45°F to 95°F, there’s zero surface rust, no pitting, and the thumbscrew still turns smoothly. The bracket’s gauge is substantial enough that you couldn’t bend it with hand pressure alone. This thing is built to outlast the doorbell itself.

🎯 Preserved Camera Functionality

A major concern with any enclosure is whether it blocks the PIR motion sensor, microphone, speaker, or night vision LEDs. The Blink Doorbell Mount has precise cutouts for all of these. The motion sensor window is completely unobstructed. The microphone port has a recessed channel that prevents the shell from covering it. The speaker grille aligns perfectly. And the IR LEDs have a clear line of sight — my night vision footage looks identical to before the mount was installed.

🎯 Tool-Free Adjustment After Initial Setup

Once the initial assembly is done (which requires a Phillips screwdriver for the four machine screws), day-to-day adjustments are tool-free. The thumbscrew on the fixed clip lets you compensate for seasonal door swelling — wood expands in humidity, contracts in dry weather. Being able to loosen, reposition, and retighten by hand in thirty seconds is a genuinely nice quality-of-life feature.

How Does Blink Doorbell Mount Perform?

🏠 Scenario 1: Daily Package Deliveries & Visitor Traffic

My front door sees anywhere from three to eight “events” per day — Amazon packages, food delivery, the mail carrier, neighbors stopping by. The mount adds zero latency to motion detection. The Blink’s PIR sensor triggers at the same distance (about 15-20 feet in my testing) with the same speed as before. The camera’s field of view is unchanged — the shell’s front opening is generously sized and doesn’t vignette the corners.

One subtle benefit: the mount positions the camera about 0.75 inches further forward from the door face than the adhesive backplate did. This actually improves the viewing angle slightly — I can see more of the porch floor area where packages get left. The rain cover doesn’t intrude into the frame at all.

Audio quality is unaffected. Two-way talk works exactly as before — the microphone port’s recessed channel prevents the plastic shell from creating any hollow resonance or wind noise amplification. I’ve had full conversations with delivery drivers through the app with zero complaints about audio clarity.

🌧️ Scenario 2: Heavy Rain & Wind Exposure

We had a proper nor’easter-style storm during my testing period — sustained 25 mph winds with gusts to 40, driving rain at a 45-degree angle. The Blink Doorbell Mount didn’t budge. The tension clamp held firm on the door edge. Zero water intrusion into the camera body. The extended rain cover did its job — water sheeted off the front and dripped from the cover’s front edge, well away from the lens.

I did notice one minor thing: in extreme wind, the door itself flexes slightly (it’s a hollow-core interior door repurposed as a storm door — don’t ask). This caused the mount to shift maybe a millimeter, but the friction grip was enough to hold position. When the wind died down, everything was still perfectly aligned. A solid-core door would eliminate even this micro-movement entirely.

☀️ Scenario 3: Intense Sun & Heat Exposure

Mid-July brought a week of 95°F+ days with the afternoon sun beating directly on my front door. The ABS plastic shell got hot to the touch — probably 120°F+ surface temp — but showed no warping, discoloration, or softening. The stainless steel bracket acted as a decent heat sink, drawing some warmth away from the camera body itself.

More importantly, the camera didn’t overheat or throttle. Blink doorbells are rated for -4°F to 113°F operating range, and the mount doesn’t push it beyond that. The rain cover’s overhang provided a few degrees of shade benefit during peak sun hours. Night vision performance remained crisp — no IR reflection off the rain cover’s interior surface, which was a concern I had going in.

🔧 Scenario 4: Attempted Tampering & Security Testing

I’m not going to let a stranger try to steal my doorbell, but I did simulate a determined removal attempt. With a cordless drill and the correct bit, it took me 47 seconds to remove the four machine screws and free the camera from the bracket. With a manual screwdriver? Three minutes and change. The screws are standard Phillips head — not security Torx or anything proprietary — which is a double-edged sword. On one hand, you can service it with tools you already own. On the other, a thief with a basic multi-bit screwdriver could defeat it given time and privacy.

That said, the mount dramatically increases the difficulty compared to the stock adhesive mount (which peels off in 10 seconds with a putty knife). It transforms the Blink from a “grab and run” target to a “need tools, time, and privacy” target. For 95% of opportunistic theft scenarios, that’s enough deterrence.

🚪 Scenario 5: Door Open/Close Cycling

This is where the inward-opening-only design matters. My door swings inward (into the house). Every time the door opens, the mount travels with it — the camera swings inward, maintaining its view of the porch. When the door closes, the mount returns to its monitoring position. This is actually a feature, not a bug — you get a view of whoever’s at the door even when the door is open.

However, if your door opens outward (toward the porch), the mount would swing away from the visitor, pointing the camera at your interior wall. That’s why the product explicitly excludes outward-opening doors. It’s a physics limitation of the clamp-on-edge design, not a design flaw.

The fixed clip’s rubber pads have shown zero wear after ~200 open/close cycles. No scuffing on my door’s top edge, no loosening of the thumbscrew. The spring tension remains consistent.

Pros and Cons of Blink Doorbell Mount

✅ Pros

• Genuine theft deterrence: Full enclosure + stainless bracket + machine screws = massive difficulty increase vs. stock mount
• Zero drilling, zero damage: Perfect for renters, historic homes, or anyone allergic to power tools
• Excellent build quality: 304 stainless bracket, thick ABS shell, precision molding — feels like a $30 product, not a $10 one
• Rain cover actually works: Extended overhang protects lens and sensor in driving rain
• Preserves all camera functions: Motion detection, night vision, two-way audio, Wi-Fi signal all unaffected
• Dual-gen compatibility: Works with both 1st and 2nd Gen Blink Video Doorbells
• Tool-free seasonal adjustment: Thumbscrew compensates for door swelling/shrinking in seconds
• Improved viewing angle: Positions camera slightly further forward for better porch coverage
• Matte black finish: Low-profile, doesn’t scream “expensive camera here” — blends with most door hardware
• Incredible value: At $9.99, it’s arguably the highest ROI accessory in the Blink ecosystem

❌ Cons

• Inward-opening doors ONLY: Zero compatibility with outward-swinging, storm, screen, or steel security doors
• Door thickness window is narrow: 0.8-1.9 inches excludes very thin hollow-core doors (<0.8") and thick solid-core/exterior doors (>1.9″)
• Requires 0.08″ frame gap: Tight-fitting doors with weatherstripping compressed to zero clearance won’t work
• Standard Phillips screws: Not tamper-resistant — a determined thief with a screwdriver can defeat it
• Adds bulk: Camera protrudes ~2.1″ from door face vs. ~1.3″ for stock mount — may catch on screen door frames if clearance is tight
• No 3rd Gen support: If you upgrade to Blink’s newest doorbell, this mount becomes e-waste
• Initial assembly requires tools: You need a Phillips screwdriver for the four machine screws — not truly “tool-free” out of the box

What Customers Are Saying About Blink Doorbell Mount

With nearly 2,000 reviews averaging 4.5 stars, the consensus is overwhelmingly positive — but the critical reviews reveal important nuances. Here are three representative customer experiences:

Customer Review: “I live in an apartment complex where doorbell theft is sadly common. My neighbor’s Ring got ripped off last month. Installed this Blink mount in about 15 minutes — most of that was reading the instructions. The clamp fits my metal-clad entry door perfectly (1.75″ thick). Been through two months of Florida humidity and afternoon thunderstorms, zero issues. The rain cover is a game-changer — my old mount let water seep behind the camera and fog the lens. For ten bucks, this is peace of mind you can’t put a price on. Only downside: the screws are regular Phillips, so I bought a pack of security Torx screws on Amazon and swapped them out. Now it’s truly tamper-proof.”

— Verified Purchaser, ★★★★★

Customer Review: “Great concept, but measure your door carefully before buying. My front door is a newer fiberglass entry door that’s 2.25″ thick — too thick for this mount. The product description says 0.8-1.9 inches, and they mean it. I tried to force it anyway and the clamp just wouldn’t close enough to grip. Ended up returning it and buying a drill-mount bracket instead. My fault for not measuring, but I wish the listing had a big bold warning about the thickness limit. If your door is standard 1.75″, this is a 5-star product. If not, don’t bother.”

— Verified Purchaser, ★★★☆☆

Customer Review: “Been using this for 6 months on my rental’s front door. Landlord was cool with it since no holes. The thumbscrew adjustment is clutch — my door swells in summer and the clamp was getting tight, just backed it off a quarter turn and done. Winter came, door shrank, tightened it back up. Takes 10 seconds. Camera still works perfect, night vision is clear, motion alerts are instant. Only complaint: the plastic shell scratches pretty easily. Mine has scuffs from the mail carrier’s bag brushing against it, and from me bumping it moving furniture. Doesn’t affect function, but looks a little beat up. Would’ve liked a slightly harder plastic or a textured finish to hide scratches.”

— Verified Purchaser, ★★★★☆

The pattern is clear: when the door fits the specs, people love this mount. The negative reviews almost exclusively come from buyers who didn’t measure their door thickness or frame gap beforehand. The scratch-prone plastic is a legitimate minor gripe that several reviewers mention.

Is Blink Doorbell Mount Right for You?

🎯 Ideal User Profiles

• The Renter Who Values Security: You can’t drill, you can’t modify, but you want your $100+ doorbell to stay where you put it. This mount gives you 90% of the security of a bolted mount with 0% of the property damage.
• The 1st/2nd Gen Blink Owner in a Rainy Climate: The stock mount offers zero weather protection. If your doorbell gets direct rain exposure, the extended cover alone justifies the price.
• The DIY-Averse Homeowner: You own your home but you’d rather not drill into your front doorframe. This gives you a clean, reversible, professional-looking installation in 15 minutes flat.
• The “Set It and Forget It” Type: Once installed, this mount needs zero maintenance beyond occasional thumbscrew adjustment. No battery changes (it doesn’t use batteries), no app updates, no firmware — it’s passive hardware that just works.

🚫 Who Should Skip It

• Outward-Opening Door Owners: Physics says no. Look at wedge mounts or drill-in brackets instead.
• Blink Video Doorbell 3rd Gen Owners: This mount physically will not fit. Different form factor entirely.
• Doors Outside 0.8-1.9″ Thickness: Measure first. If you’re outside this range, the clamp cannot achieve secure grip.
• Zero Frame Gap Doors: If your door sits flush against the frame with weatherstripping fully compressed, there’s nowhere for the clamp to bite.
• Maximum Security Purists: If you want tamper-proof Torx screws, integrated alarms, or a mount that survives a crowbar attack, this isn’t it. This is deterrence, not fortification.

Is Blink Doorbell Mount Worth the Price?

At $9.99, the Blink Doorbell Mount occupies a fascinating price point. It’s cheaper than a large pizza, yet it protects a device that costs 10-15x as much. Let’s break down the value proposition.

Price Analysis

Compared to the official Blink accessories (which tend to run $15-25 for basic mounts), this third-party option undercuts them by 40-60% while adding features the official mounts lack — specifically the anti-theft enclosure and rain cover. Compared to universal drill-in mounts ($12-18), it’s cheaper AND doesn’t require tools or holes. Compared to high-end anti-theft cages ($30-50), it’s a fraction of the cost while delivering 80% of the deterrence value.

Comparison to Alternatives

Long-Term Value Assessment

The real value calculation isn’t the $9.99 — it’s what that $9.99 prevents. A stolen Blink Video Doorbell costs $99-149 to replace (depending on generation and sale timing). Plus the hassle of re-setup, lost footage, and the violation of having your security device stolen. If this mount prevents one theft over its lifetime, it’s paid for itself 10x over.

Durability-wise, the 304 stainless bracket and UV-stabilized ABS should last 5-7 years minimum in outdoor exposure. The thumbscrew mechanism is the only wear item, and it’s a standard M4 thread — replaceable for pennies if it ever strips. There are no electronics, no batteries, no moving parts to fail. This is a “buy once, use until you change doorbells” product.

Resale value? Minimal — it’s a $10 plastic and metal bracket. But that’s not the point. The point is risk reduction per dollar spent, and on that metric, the Blink Doorbell Mount is arguably the single highest-ROI accessory in the entire smart home category.

Frequently Asked Questions

Does the Blink Doorbell Mount work with the Blink Video Doorbell 3rd Generation?

No. The 3rd Gen Blink Video Doorbell has a completely different form factor — it’s larger, shaped differently, and has a different mounting hole pattern. This mount is explicitly designed for 1st and 2nd Gen only. Attempting to force a 3rd Gen unit will damage both the mount and the doorbell.

Can I use this on a metal/steel front door?

Yes, provided the door thickness is within 0.8-1.9 inches and there’s a 0.08″+ gap between the door edge and frame. The stainless steel bracket’s rubber pads grip metal doors just fine. However, if your steel door has a raised panel or weatherstripping that prevents the clamp from seating flat, it may not work. Test fit before final assembly.

Will the rain cover block the motion sensor or night vision?

No. The rain cover is positioned above the lens and sensor array, projecting forward. It does not extend downward into the sensor’s field of view. The IR LEDs for night vision are below the cover’s leading edge. In my testing, motion detection range and night vision clarity are identical to the unmounted camera.

How secure is the mount against a determined thief with tools?

It uses four standard Phillips-head machine screws. A thief with a cordless drill and Phillips bit could remove the camera in under a minute. With a manual screwdriver, 3-4 minutes. This is deterrence, not prevention. For true tamper-proofing, many users (including me) replace the included screws with security Torx or one-way screws — a $3 hardware store upgrade that makes removal nearly impossible without specialized tools.

Can I paint the Blink Doorbell Mount to match my door?

Technically yes — the ABS plastic takes paint well if you use a plastic-specific primer and paint. However, I’d caution against painting the rain cover’s underside or any interior surfaces, as paint buildup could affect the camera’s fit or create glare for the lens. The matte black is neutral enough that most people leave it as-is.

Does the mount interfere with Wi-Fi signal?

No measurable impact. The shell is ABS plastic (RF-transparent) and the stainless bracket is thin and positioned behind the camera’s antenna area. My RSSI values in the Blink app are unchanged from the stock adhesive mount (-42 dBm before, -43 dBm after — well within margin of error).

What if my door swells in summer and the clamp gets too tight?

That’s exactly what the thumbscrew is for. Loosen it by hand (no tools needed), let the clamp expand, re-tighten. Takes 15 seconds. I’ve done this twice already this season as humidity cycled. The spring mechanism has enough travel to accommodate ~0.25″ of dimensional change.

Is the installation truly reversible with zero marks?

On my painted wood door: yes, zero marks after removal. The rubber pads distribute pressure evenly. On unfinished wood or soft pine, you might see faint compression marks that disappear in a few days. On high-gloss finishes, use a microfiber cloth between the pad and door for extra caution. No holes, no adhesive residue, no putty needed.

Can I still access the doorbell’s USB charging port with the mount installed?

Yes. The protective shell has a precise cutout for the USB-C port on the bottom of the Blink doorbell. You can plug in a charging cable without removing the camera from the mount. The cover doesn’t interfere with cable insertion at all.

What’s the warranty on this mount?

The manufacturer offers a 1-year limited warranty against defects in materials and workmanship. Given the $9.99 price point, most buyers don’t bother with warranty claims — but it’s nice that it exists. The build quality suggests you’ll never need it.

Final Verdict: Should You Buy Blink Doorbell Mount?

Overall Rating: ★★★★½ (4.5/5)

Key Takeaways

• The Blink Doorbell Mount delivers exceptional protection per dollar spent — it’s the rare accessory that genuinely solves a real problem at an impulse-buy price.
• Build quality punches well above its weight class. The 304 stainless bracket and precision-molded ABS shell feel like they belong on a $30-40 product.
• The rain cover isn’t marketing fluff — it functionally protects the lens and sensor in driving rain, eliminating the fogging and false alerts that plague exposed doorbells.
• Compatibility restrictions are real and non-negotiable. Measure your door thickness and frame gap before ordering. The 0.8-1.9″ window and 0.08″ gap requirement are hard physical limits.
• The standard Phillips screws are the one genuine design compromise. Spend $3 on security Torx screws if you want true tamper resistance.
• For renters and inward-door owners with 1st/2nd Gen Blink doorbells, this is essentially a mandatory purchase. The risk/reward ratio is that lopsided.

Final Recommendation

Buy it if: You have a Blink Video Doorbell 1st or 2nd Gen, an inward-opening door between 0.8-1.9″ thick with a visible frame gap, and you want theft protection and weather resistance without drilling. At $9.99, the downside risk is nearly zero.

Skip it if: You have a 3rd Gen Blink, an outward-opening door, a door outside the thickness range, or zero frame gap. No amount of wishing will make it fit.

Pro tip: Order a 4-pack of M3 x 8mm security Torx screws (under $5 on Amazon) and swap them in during initial assembly. It takes two extra minutes and transforms this from “high deterrence” to “genuinely tamper-resistant.”

Conclusion

After three weeks of daily use — through rain, heat, constant door cycles, and a simulated break-in attempt — the Blink Doorbell Mount has earned its place on my front door. It’s not perfect. The compatibility restrictions are tight, the screws are too standard, and the plastic scratches easier than I’d like. But for ten dollars? It delivers 90% of what a $40 anti-theft cage delivers, with zero drilling, zero permanent modification, and zero ongoing maintenance.

If you’re a Blink 1st or 2nd Gen owner with a compatible door, the decision is almost embarrassingly easy. The peace of mind per dollar ratio is off the charts. Your doorbell stays where you put it, your footage stays clear in the rain, and when you move — or upgrade to the 3rd Gen — you unscrew four bolts and walk away clean.

That’s the kind of smart home accessory I can get behind: simple, effective, honest about its limitations, and priced like the commodity hardware it is. Ten bucks well spent.

Ready to secure your Blink doorbell?
Check Current Price on Amazon →